Deleting a Subnet from a Roving Edge Infrastructure Device

Describes how to delete a subnet under a VCN on your Roving Edge Infrastructure device.

If the subnet is empty, its state changes to TERMINATING briefly and then TERMINATED. If the subnet is not empty, you get an error indicating that instances or other resources contained within that you must delete first.

    1. Open the navigation menu and select Networking > Virtual Cloud Networks. The Virtual Cloud Networks page appears. The single virtual cloud network (VCN) is listed in tabular form.

    2. Click the VCN. The VCN's Details page appears.

    3. Click Subnets. All subnets are listed in tabular form.

    4. Click the subnet whose details you want to get. The subnet's Details page appears.

    5. Click Terminate.

    6. Confirm the deletion when prompted.

  • Use the oci network subnet delete command and required parameters to delete a subnet under a VCN on your Roving Edge Infrastructure devices:

    oci network subnet delete --subnet-id subnet_ocid [OPTIONS]

    Refer to your Roving Edge Infrastructure device's CLI help for a list of parameters available for this command. See Accessing Command Line Interface Help.

    For set up information regarding CLIs on your Roving Edge Infrastructure device, see Using the Command Line Interface.

  • Run the DeleteSubnet operation to delete a subnet under a VCN on your Roving Edge Infrastructure devices.