Roving Edge Infrastructure Device Specifications
Describes the hardware and port specifications for Roving Edge Infrastructure devices.
Hardware
The following table lists the hardware specifications of the Roving Edge Infrastructure devices:
|
Roving Edge Device |
Roving Edge Ultra |
|
|---|---|---|
|
Object, Block, and Filesystem Storage |
61 TB raw |
7.68 TB raw Removable NVMe-based Ignition Key (512 GB) for added security which contains the Roving Edge Infrastructure device operating system and the keys to decrypt the data drive. |
|
Available OCPU |
32 |
8 |
|
Available RAM |
390 GB DDR4-2933 |
64 GB DDR4-2400 |
|
GPU |
Nvidia(R) Tesla(R) T4 GPU 2650 cudas cores, 320 sensor cores |
No integrated GPU. Supports up to 2 Intel Movidius VPUs via USB |
|
CPU |
2 x Intel(R) Xeon(R) CPUs Gold 6230T @ 2.1Ghz, 40 total cores |
Intel(R) Xeon(R) CPU D-1559 @ 1.50GHz, 12 total cores |
|
Networking |
2x10GbE (1 active) |
2x1GbE (1 active) |
|
Security |
TPM, Trenchboot SecureBoot, physical tamper evidence |
TPM, Trenchboot SecureBoot, physical tamper evidence Removable NVMe-based Ignition Key (512 GB) for added security which contains the Roving Edge Infrastructure device operating system and the keys to decrypt the data drive. |
|
Dimensions |
System: 20" L x 17" W x 3.5" H Rugged Case: 38" L x 23.6" W x 11.8" H |
7.4" L x 6.3" W x 2" H without battery 7.4" L x 7.95" W x 2" H with battery pack |
|
Weight |
33.6 lbs (15.24 Kg) without rugged case 82.6 lbs (37.47 Kg) with rugged case combined weight |
3.75 lbs (1.7 Kg) without battery 4.80 lbs (2.18 kg) with battery pack |
|
Power Output |
850 W |
55 W |
|
Input Voltage |
100 - 240VAC |
9 - 36VDC |
| Battery Options | N/A |
Voyager1+ (120 W power output with 65 Wh battery backup power) |
|
80 PLUS Standard |
80 PLUS Platinum |
|
|
Connector Type |
C14 |
|
| Compliance and Certs |
FIPS 140-2 Level 2 MIL-STD-810G MIL-STD-461G MIL-STD-1472H MIL-STD-1474E |
FIPS 140-2 Level 2 MIL-STD-810G/H MIL-STD-461F |
| Operating Temp Range |
0 C to 43 C (-5 C to 65 C storage) |
-20 C to 50 C (-40 C to 85 C storage) |
| Noise Level |
68.6 - 73.7 dB (at 25 C ambient) |
< 60 dB |
Self-Encryption
The SN640 7.68 TB flash storage devices used in Ultrastar Edge 2U24 (also known as Patton) are instant secure erase (ISE) drives. ISE drives behave like full disk encryption (FDE) drives in that the data is encrypted with a hardware key when written to disk, and then decrypted when the data is read from the disk.
When the Crypto erase command is sent to the drive, the encryption/decryption key is overwritten, preventing the stored data from being decrypted. Unlike SED or FDE drives, ISE drives do not support any of the security management functions for managing the cryptography on the drive.
The TPM cryptographic modules used in Patton is FIPS 140-2 certified. SN640 is not FIPS certified.
Tamper-Evident Seals
The following lists the tamper-evident seals status for Roving Edge Infrastructure devices:
-
SN640: This type of device is not FIPS certified and does not have tamper-evident seals.
-
Ultrastar Edge 2U24: Tamper-evident seals are present on this type of device but are not FIPS 140-2 certified.
Ultra Battery Options
The following battery options are available for use with Roving Edge Ultra devices:
-
Modular stackable form-factor integrated 75Wh module:
-
Directly attaches to the chassis.
-
Provides up to 1 hour of operation per battery at its maximum CPU load.
-
Has a 60W output.
-
Stackable 2-deep for up to 2 hours of operating time.
-
-
Optional external military standard BB-2590/U L-Ion 294 Wh battery (not included):
-
Military-qualified third-party battery.
-
Multiple capacities available but high capacity model provides 3.5-4 hours of operation.
-
-
Integrated moduled batteries and BB-2590/U batteries used in tandem. You can use supported battery options in tandem to extend operating time
Service Ports
Each Roving Edge Infrastructure device supports a single IP and exposes its services through the following unique ports:
|
Service |
Port |
|---|---|
|
Identity |
12050 |
|
Authorization |
12060 |
|
Object Storage Gateway |
8019 |
|
Virtual Cloud Network (VCN) |
18336 |
|
Compute |
19060 |
|
Data Sync |
21060, 21061 |
|
Monitoring |
22060 |
|
System Upgrade |
23060 |
|
Block Storage |
5012 |
|
Roving Edge Device Console |
8015 |
|
Etcd3 |
18000 |
Running CLIs on Device-Hosted Compute Instances
Configure your Roving Edge Infrastructure device to run the command line interface (CLI) on its compute instances.
Follow these guidelines for running CLIs on compute instances hosted by Roving Edge Infrastructure devices.
The instructions in this topic are for Oracle Linux host computers.
-
Have the VM go through the following local IP:
169.254.169.254 -
Have the VM refer to the Roving Edge Infrastructure device as
otec-console-local. -
Employ the following IP Tables rules:
{ for i in 19060 8019 12050 21060 22060 23060 22060 12060;do iptables -I BareMetalInstanceServices -d 169.254.169.254/32 -p tcp -m tcp --dport $i -m comment --comment "Rover service access port" -j ACCEPT;done }See Service Ports for a list of available ports.