Networking

Oracle Cloud Infrastructure FastConnect now makes it easier to configure redundancy. Several types of redundancy are supported:

With the new Oracle Interconnect for Google Cloud, you can connect your Google Cloud resident applications or services with Oracle ...

You can now control network access to OCI Cache clusters using security rules defined for one or more network security ...

Network Path Analyzer (NPA) is now available in US Government Cloud with FedRAMP Authorization.

For more information about US ...

You can now use capture filters to generate flow logs only for traffic you specify:

• Enable flow logs ...

You may now assign IPv6 addresses to VNICs attached to your Compute instance during launch. Assigned IP addresses will be ...

MACSEC for FastConnect now allows Fail Open mode. This would allow unencrypted traffic to flow on the FastConnect virtual circuit ...

You can now provision Site-to-Site VPN over your FastConnect virtual circuits rather than over the public internet. See FastConnect Security ...

To enable the generation of larger regional topology maps, limits are now enforced on the number of elements displayed. Formerly, ...

Oracle Digital Assistant is now available via a private endpoint in your VCN in addition to existing access methods. For ...

If your FastConnect Partner is Megaport, you can now use the OCI Console to set up FastConnect and then create ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure South Africa Central (Johannesburg) region and Azure ...

The default limit for route rules in VCN routing tables has been increased to 200 and made a soft limit. ...

OCI now supports intra-VCN routing, which creates local routes for each VCN CIDR in all VCN route tables, new ...

OCI now supports the use of multiple IPv6 prefixes within a VCN and subnet, and IPv6 addresses from different prefixes ...

Network Visualizer now allows you to export topology maps and a PDF with relevant resource information. You can also now ...

Network Path Analyzer (NPA) provides a unified and intuitive capability you can use to identify virtual network configuration issues that ...

The FastConnect partner-side provisioning process for virtual circuits with the Megaport and Colt partners is now more streamlined. You can ...

Today, Oracle launches the Virtual Testing Access Point (VTAP) service in OCI. VTAP functionality, sometimes referred to as full packet ...

Oracle can now support multiple IPv6 prefixes for use within a VCN.

When you enable IPv6 on a VCN, ...

Users of Oracle FastConnect now have an easy way to tear down and re-establish a BGP peering session over their ...

The required matchCriteria field in a DRG route distribution statement now has a MATCH_ALL matchType that Terraform can use instead ...

You can now choose to import VCN CIDRs or subnet CIDRs from a VCN attachment. For details, see the Overview ...

Oracle Cloud Infrastructure FastConnect now displays the names of the physical and logical devices in FastConnect locations that are used ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure Singapore (Singapore) region and Azure Singapore location, ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure South Korea Central (Seoul) region and Azure ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure US West (Phoenix) region and Azure Phoenix ...

Network Load Balancers can now support dual-stack IPv6 addresses. This enables you to support both IPv4 and IPv6 clients on ...

IPSec tunnels in Site-to-Site VPN can now be customized in the following ways:

• Custom phase 1 and phase ...

FastConnect using colocation or a third-party provider can now be configured to support MACsec encryption. For more details, refer to ...

This update of the Network Visualizer service extends the granularity of the visualization to see within subnets, and adds the ...

This update of the Network Visualizer service introduces the visualization for DRGv2 capabilities in the regional view covering the following ...

When using either the VCN or VPN wizard, you are proactively informed when you are near or at any relevant ...

Tenancies made after June 23, 2021 are by default not allowed to send e-mail via outbound TCP port 25 to ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure Brazil Southeast (Vinhedo) region and Azure Campinas ...

DRG functionality has been expanded to include the following capabilities:

• You can attach a DRG to more than ...

When you create a compute instance, you can now opt out of creating a DNS record for the instance's VNIC. ...

DRG functionality has been expanded to include the following capabilities:

• You can attach a DRG to more than ...

The Inter-Region Latency Dashboard is now available in all regions. The Inter-Region Latency dashboard provides the average network round-trip latency ...

We are pleased to announce general availability for IPv6 addressing. Going forward Oracle will assign a /56 IPv6 CIDR for ...

Network Visualizer is now available in all regions.

The Network Visualizer provides a diagram of the implemented topology of ...

Route filtering on FastConnect is now available. Route Filtering allows you to determine how BGP over FastConnect shares advertised routes ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure Germany Central (Frankfurt) region and Azure Frankfurt ...

You can now enable and view logs for the VPN Connect service in the console via either VPN Connect or ...

IPSec tunnels in VPN Connect can now support policy-based routing with up to 50 encryption domains. To learn more, review ...

You can now update VCN and subnet CIDR block information after creation:

• A VCN now supports up to ...

You can now use your own private DNS domain names and fully manage the associated zones and records to provide ...

Oracle Cloud Infrastructure now allows you to Bring Your Own IP (BYOIP) address space to use with resources in Oracle ...

You can now create and manage VMware enabled software-defined data centers (SDDCs) in Oracle Cloud Infrastructure by using Oracle's VMware ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure US West (San Jose) region and Azure ...

Beginning today, if you are in commercial regions you can now optionally configure dual stack IPv4/IPv6 in your tenancy to ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to the Oracle Cloud Infrastructure Japan East (Tokyo) region and Azure ...

For customers using VPN Connect (a site-to-site VPN connection to Oracle Cloud Infrastructure):

The Oracle Console has a new ...

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure Oracle Cloud Infrastructure and Microsoft Azure cross-cloud ...

For customers who use FastConnect or VPN Connect for connectivity between your on-premises network and VCN:

The Oracle Console ...

You can now provide descriptions for a VCN's security list rules and route rules. Providing descriptions for the rules can ...

The Oracle Cloud Infrastructure Monitoring service now supports service gateways. For more information, see Service Gateway Metrics.

Oracle Cloud Infrastructure and Microsoft Azure cross-cloud connection expanded to Oracle Cloud Infrastructure Canada Southeast (Toronto) region and Azure Canada ...

The Oracle Cloud Infrastructure Events service now supports the following Networking resources:

• DHCP options
• Dynamic routing gateways ...

There's a new "VCN with Internet Connectivity" wizard in the Oracle Console. The wizard quickly sets up a VCN with ...

Public IP address ranges for VCNs and the Oracle Services Network are now published to a JSON file which you ...

VPN Connect now supports Internet Key Exchange version 2 (IKEv2), additional crypto algorithms, and NAT-T.

For a list ...

The Oracle Cloud Infrastructure Events service now supports the following Networking resource: service gateways. For more information, see Services that ...

The Oracle Cloud Infrastructure Events service now supports topics and subscriptions (Notifications service) and NAT gateways (Networking service). For more ...

In addition to VCNs, subnets, route tables, security lists, service gateways, and NAT gateways, you can now move these network ...

IPv6 addressing is now supported in the Oracle Cloud Infrastructure Government Cloud only. For more information, see these topics:

There's a new transit routing scenario that gives your on-premises network private access to Oracle services through the connected VCN's ...

You can move VCNs, subnets, route tables, security lists, service gateways, and NAT gateways from one compartment to another. See ...

The advanced VCN routing scenario called transit routing now also supports the ability to route through a private IP address ...

The Oracle Cloud Infrastructure Monitoring service now supports both FastConnect and VPN Connect.

For more information, see these topics: ...

The Oracle Console now includes a VPN Connect workflow to help you quickly set up an IPSec connection between your ...

Oracle and Microsoft have created a cross-cloud connection between Oracle Cloud Infrastructure and Microsoft Azure in certain regions. This connection ...

With this release, there are two changes related to managing an Oracle Cloud Infrastructure IPSec VPN.

BGP Dynamic Routing ...

With this release, there are two changes related to managing an Oracle Cloud Infrastructure IPSec VPN.

Changing Static Routes ...

The service gateway now offers access to multiple services in the Oracle Service Network. The Oracle Services Network is ...

You can implement an advanced VCN routing scenario called transit routing. It enables communication between an on-premises network and ...

Before this release, when you created a subnet, you specified which security lists, route table, and set of DHCP options ...

You can now add a NAT gateway to your VCN to perform Network Address Translation (NAT). A NAT gateway gives ...

This Networking service known issue has been resolved:

Existing instances in a subnet don't get updated list of DNS ...

The resources in your VCN can now use a service gateway to access Object Storage over a private connection that ...

You can ask Oracle to provision a connection between your Oracle Cloud Infrastructure Classic environment and Oracle Cloud Infrastructure environment. ...

Certain Windows instance shapes now support secondary VNICs. For more information and a script for configuring Windows to recognize a ...

You can now apply tags to reserved public IPs. See Overview of Tags.

You can now apply tags to virtual network interface cards (VNICs). See Overview of Tags.

You can now apply tags to these Networking service resources:

• customer-premises equipment (CPE) objects
• dynamic routing gateways ...

You can now peer VCNs remotely (across regions). For more information, see Remote VCN Peering (Across Regions).

You can now create reserved public IPs, and move them between your instances in a given region. You can ...

You can now create public virtual circuits with Oracle Cloud Infrastructure FastConnect. For more information, see FastConnect Overview.

The Console now supports a VCN "Delete All" function that lets you click one button to delete a VCN, its ...

You can connect two VCNs in the same region so their resources can communicate without routing the traffic over the ...

You can now route a subnet's traffic to an instance in your VCN. For more information, see Using a Private ...

Each instance automatically comes with a primary VNIC and a primary private IP address, and now you can add secondary ...

You can now create a VCN using any valid IP address range. Oracle recommends using one of the private IP ...

When creating a subnet, you can designate it as private, which means instances in the subnet cannot have public IP ...

Your existing network and VCN can communicate over a private connection that doesn't traverse the internet. For more information, see ...

A new Search Domain DHCP option is now available. For more information, see DHCP Options and DNS in Your Virtual ...

The Internet and VCN Resolver is now available. For more information, see DNS in Your Virtual Cloud Network.

• Ability to update object names: When you create a Networking object (for example, VCN, subnet, etc.), you can optionally ...