| AddDrgRouteDistributionStatementDetails |
Details used to add a route distribution statement.
|
| AddDrgRouteDistributionStatementDetails.Builder |
|
| AddDrgRouteDistributionStatementsDetails |
Details request to add statements to a route distribution.
|
| AddDrgRouteDistributionStatementsDetails.Builder |
|
| AddDrgRouteRuleDetails |
Details needed when adding a DRG route rule.
|
| AddDrgRouteRuleDetails.Builder |
|
| AddDrgRouteRulesDetails |
Details used in a request to add static routes to a DRG route table.
|
| AddDrgRouteRulesDetails.Builder |
|
| AddedNetworkSecurityGroupSecurityRules |
|
| AddedNetworkSecurityGroupSecurityRules.Builder |
|
| AddImageShapeCompatibilityEntryDetails |
Image shape compatibility details.
|
| AddImageShapeCompatibilityEntryDetails.Builder |
|
| AddNetworkSecurityGroupSecurityRulesDetails |
|
| AddNetworkSecurityGroupSecurityRulesDetails.Builder |
|
| AddPublicIpPoolCapacityDetails |
The information used to add capacity to an IP pool.
|
| AddPublicIpPoolCapacityDetails.Builder |
|
| AddSecurityRuleDetails |
A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
|
| AddSecurityRuleDetails.Builder |
|
| AddSubnetIpv6CidrDetails |
Details used when adding an IPv6 prefix to a subnet.
|
| AddSubnetIpv6CidrDetails.Builder |
|
| AddVcnCidrDetails |
Details used to add a CIDR block to a VCN.
|
| AddVcnCidrDetails.Builder |
|
| AddVcnIpv6CidrDetails |
Details used when adding a ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or a
BYOIPv6 prefix.
|
| AddVcnIpv6CidrDetails.Builder |
|
| AllowedIkeIPSecParameters |
Lists the current allowed and default IPSec tunnel parameters.
|
| AllowedIkeIPSecParameters.Builder |
|
| AllowedPhaseOneParameters |
Allowed phase one parameters.
|
| AllowedPhaseOneParameters.Builder |
|
| AllowedPhaseTwoParameters |
Allowed phase two parameters.
|
| AllowedPhaseTwoParameters.Builder |
|
| AmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| AmdMilanBmGpuLaunchInstancePlatformConfig.Builder |
|
| AmdMilanBmGpuPlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| AmdMilanBmGpuPlatformConfig.Builder |
|
| AmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| AmdMilanBmLaunchInstancePlatformConfig.Builder |
|
| AmdMilanBmPlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| AmdMilanBmPlatformConfig.Builder |
|
| AmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the BM.GPU4.8 shape
(the AMD Rome platform).
|
| AmdRomeBmGpuLaunchInstancePlatformConfig.Builder |
|
| AmdRomeBmGpuPlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
| AmdRomeBmGpuPlatformConfig.Builder |
|
| AmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
| AmdRomeBmLaunchInstancePlatformConfig.Builder |
|
| AmdRomeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard.E3.128 shape (the
AMD Rome platform).
|
| AmdRomeBmPlatformConfig.Builder |
|
| AmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
| AmdVmLaunchInstancePlatformConfig.Builder |
|
| AmdVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the AMD platform.
|
| AmdVmPlatformConfig.Builder |
|
| AmdVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the AMD platform.
|
| AmdVmUpdateInstancePlatformConfig.Builder |
|
| AppCatalogListing |
Listing details.
|
| AppCatalogListing.Builder |
|
| AppCatalogListingResourceVersion |
|
| AppCatalogListingResourceVersion.Builder |
|
| AppCatalogListingResourceVersionAgreements |
Agreements for a listing resource version.
|
| AppCatalogListingResourceVersionAgreements.Builder |
|
| AppCatalogListingResourceVersionSummary |
|
| AppCatalogListingResourceVersionSummary.Builder |
|
| AppCatalogListingSummary |
A summary of a listing.
|
| AppCatalogListingSummary.Builder |
|
| AppCatalogSubscription |
a subscription for a listing resource version.
|
| AppCatalogSubscription.Builder |
|
| AppCatalogSubscriptionSummary |
a subscription summary for a listing resource version.
|
| AppCatalogSubscriptionSummary.Builder |
|
| AttachBootVolumeDetails |
|
| AttachBootVolumeDetails.Builder |
|
| AttachEmulatedVolumeDetails |
|
| AttachEmulatedVolumeDetails.Builder |
|
| AttachInstancePoolInstanceDetails |
An instance that is to be attached to an instance pool.
|
| AttachInstancePoolInstanceDetails.Builder |
|
| AttachIScsiVolumeDetails |
|
| AttachIScsiVolumeDetails.Builder |
|
| AttachLoadBalancerDetails |
Represents a load balancer that is to be attached to an instance pool.
|
| AttachLoadBalancerDetails.Builder |
|
| AttachParavirtualizedVolumeDetails |
|
| AttachParavirtualizedVolumeDetails.Builder |
|
| AttachServiceDeterminedVolumeDetails |
|
| AttachServiceDeterminedVolumeDetails.Builder |
|
| AttachVnicDetails |
|
| AttachVnicDetails.Builder |
|
| AttachVolumeDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| AutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
| BgpSessionInfo |
Information for establishing a BGP session for the IPSec tunnel.
|
| BgpSessionInfo.Builder |
|
| BlockVolumeReplica |
An asynchronous replica of a block volume that can then be used to create a new block volume or
recover a block volume.
|
| BlockVolumeReplica.Builder |
|
| BlockVolumeReplicaDetails |
|
| BlockVolumeReplicaDetails.Builder |
|
| BlockVolumeReplicaInfo |
Information about the block volume replica in the destination availability domain.
|
| BlockVolumeReplicaInfo.Builder |
|
| BooleanImageCapabilitySchemaDescriptor |
|
| BooleanImageCapabilitySchemaDescriptor.Builder |
|
| BootVolume |
A detachable boot volume device that contains the image used to boot a Compute instance.
|
| BootVolume.Builder |
|
| BootVolumeAttachment |
Represents an attachment between a boot volume and an instance.
|
| BootVolumeAttachment.Builder |
|
| BootVolumeBackup |
A point-in-time copy of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
| BootVolumeBackup.Builder |
|
| BootVolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
| BootVolumeKmsKey.Builder |
|
| BootVolumeReplica |
An asynchronous replica of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
| BootVolumeReplica.Builder |
|
| BootVolumeReplicaDetails |
|
| BootVolumeReplicaDetails.Builder |
|
| BootVolumeReplicaInfo |
Information about the boot volume replica in the destination availability domain.
|
| BootVolumeReplicaInfo.Builder |
|
| BootVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| BootVolumeSourceFromBootVolumeBackupDeltaDetails |
Specifies the boot volume backups (first & second) and block size in bytes.
|
| BootVolumeSourceFromBootVolumeBackupDeltaDetails.Builder |
|
| BootVolumeSourceFromBootVolumeBackupDetails |
Specifies the boot volume backup.
|
| BootVolumeSourceFromBootVolumeBackupDetails.Builder |
|
| BootVolumeSourceFromBootVolumeDetails |
Specifies the source boot volume.
|
| BootVolumeSourceFromBootVolumeDetails.Builder |
|
| BootVolumeSourceFromBootVolumeReplicaDetails |
Specifies the source boot volume replica which the boot volume will be created from.
|
| BootVolumeSourceFromBootVolumeReplicaDetails.Builder |
|
| BulkAddVirtualCircuitPublicPrefixesDetails |
|
| BulkAddVirtualCircuitPublicPrefixesDetails.Builder |
|
| BulkDeleteVirtualCircuitPublicPrefixesDetails |
|
| BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder |
|
| Byoasn |
Oracle offers the ability to Bring Your Own Autonomous System Number (BYOASN), importing AS
Numbers you currently own to Oracle Cloud Infrastructure.
|
| Byoasn.Builder |
|
| ByoasnByoipRange |
Information about ‘ByoipRange’ that has byoasn as origin.
|
| ByoasnByoipRange.Builder |
|
| ByoasnCollection |
The results returned by a ListByoasn operation.
|
| ByoasnCollection.Builder |
|
| ByoasnSummary |
Information about a Byoasn resource.
|
| ByoasnSummary.Builder |
|
| ByoipAllocatedRangeCollection |
Results of a ListByoipAllocatedRanges operation.
|
| ByoipAllocatedRangeCollection.Builder |
|
| ByoipAllocatedRangeSummary |
A summary of CIDR block subranges that are currently allocated to an IP pool.
|
| ByoipAllocatedRangeSummary.Builder |
|
| ByoipRange |
Oracle offers the ability to Bring Your Own IP (BYOIP), importing public IP addresses or IPv6
addresses that you currently own to Oracle Cloud Infrastructure.
|
| ByoipRange.Builder |
|
| ByoipRangeCollection |
The results returned by a ListByoipRange operation.
|
| ByoipRangeCollection.Builder |
|
| ByoipRangeOriginAsn |
Information about the origin asn.
|
| ByoipRangeOriginAsn.Builder |
|
| ByoipRangeSummary |
Information about a ByoipRange resource.
|
| ByoipRangeSummary.Builder |
|
| ByoipRangeVcnIpv6AllocationSummary |
A summary of IPv6 prefix subranges currently allocated to a VCN.
|
| ByoipRangeVcnIpv6AllocationSummary.Builder |
|
| Byoipv6CidrDetails |
The list of one or more BYOIPv6 prefixes for the VCN that meets the following criteria: - The
prefix must be from a BYOIPv6 range.
|
| Byoipv6CidrDetails.Builder |
|
| CapacityReportInstanceShapeConfig |
The shape configuration for a shape in a capacity report.
|
| CapacityReportInstanceShapeConfig.Builder |
|
| CapacityReportShapeAvailability |
Information about the available capacity for a shape.
|
| CapacityReportShapeAvailability.Builder |
|
| CapacityReservationInstanceSummary |
Condensed instance data when listing instances in a compute capacity reservation.
|
| CapacityReservationInstanceSummary.Builder |
|
| CapacitySource |
A capacity source of bare metal hosts.
|
| CaptureConsoleHistoryDetails |
|
| CaptureConsoleHistoryDetails.Builder |
|
| CaptureFilter |
A capture filter contains a set of captureFilterRuleDetails governing
what traffic is mirrored for a Vtap or captured for a VCN Flow
Log. |
| CaptureFilter.Builder |
|
| ChangeBootVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the boot volume backup to.
|
| ChangeBootVolumeBackupCompartmentDetails.Builder |
|
| ChangeBootVolumeCompartmentDetails |
Contains the details for the compartment to move the boot volume to.
|
| ChangeBootVolumeCompartmentDetails.Builder |
|
| ChangeByoasnCompartmentDetails |
The configuration details for the move operation.
|
| ChangeByoasnCompartmentDetails.Builder |
|
| ChangeByoipRangeCompartmentDetails |
The configuration details for the move operation.
|
| ChangeByoipRangeCompartmentDetails.Builder |
|
| ChangeCaptureFilterCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a capture filter.
|
| ChangeCaptureFilterCompartmentDetails.Builder |
|
| ChangeClusterNetworkCompartmentDetails |
The configuration details for the move operation.
|
| ChangeClusterNetworkCompartmentDetails.Builder |
|
| ChangeComputeCapacityReservationCompartmentDetails |
Specifies the compartment to move the compute capacity reservation to.
|
| ChangeComputeCapacityReservationCompartmentDetails.Builder |
|
| ChangeComputeCapacityTopologyCompartmentDetails |
Specifies the compartment to move the compute capacity topology to.
|
| ChangeComputeCapacityTopologyCompartmentDetails.Builder |
|
| ChangeComputeClusterCompartmentDetails |
The configuration details for the move operation.
|
| ChangeComputeClusterCompartmentDetails.Builder |
|
| ChangeComputeGpuMemoryClusterCompartmentDetails |
Specifies the compartment to move the compute GPU memory cluster to.
|
| ChangeComputeGpuMemoryClusterCompartmentDetails.Builder |
|
| ChangeComputeGpuMemoryFabricCompartmentDetails |
Specifies the compartment to move the compute GPU memory fabric to.
|
| ChangeComputeGpuMemoryFabricCompartmentDetails.Builder |
|
| ChangeComputeHostCompartmentDetails |
Specifies the compartment to move the compute host to.
|
| ChangeComputeHostCompartmentDetails.Builder |
|
| ChangeComputeImageCapabilitySchemaCompartmentDetails |
The configuration details for the move operation.
|
| ChangeComputeImageCapabilitySchemaCompartmentDetails.Builder |
|
| ChangeCpeCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCpeCompartmentDetails.Builder |
|
| ChangeCrossConnectCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCrossConnectCompartmentDetails.Builder |
|
| ChangeCrossConnectGroupCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCrossConnectGroupCompartmentDetails.Builder |
|
| ChangeDedicatedVmHostCompartmentDetails |
Specifies the compartment to move the dedicated virtual machine host to.
|
| ChangeDedicatedVmHostCompartmentDetails.Builder |
|
| ChangeDhcpOptionsCompartmentDetails |
The configuration details for the move operation.
|
| ChangeDhcpOptionsCompartmentDetails.Builder |
|
| ChangeDrgCompartmentDetails |
The configuration details for the move operation.
|
| ChangeDrgCompartmentDetails.Builder |
|
| ChangeImageCompartmentDetails |
The configuration details for the move operation.
|
| ChangeImageCompartmentDetails.Builder |
|
| ChangeInstanceCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstanceCompartmentDetails.Builder |
|
| ChangeInstanceConfigurationCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstanceConfigurationCompartmentDetails.Builder |
|
| ChangeInstancePoolCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstancePoolCompartmentDetails.Builder |
|
| ChangeInternetGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInternetGatewayCompartmentDetails.Builder |
|
| ChangeIPSecConnectionCompartmentDetails |
The configuration details for the move operation.
|
| ChangeIPSecConnectionCompartmentDetails.Builder |
|
| ChangeLocalPeeringGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeLocalPeeringGatewayCompartmentDetails.Builder |
|
| ChangeNatGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeNatGatewayCompartmentDetails.Builder |
|
| ChangeNetworkSecurityGroupCompartmentDetails |
|
| ChangeNetworkSecurityGroupCompartmentDetails.Builder |
|
| ChangePublicIpCompartmentDetails |
The configuration details for the move operation.
|
| ChangePublicIpCompartmentDetails.Builder |
|
| ChangePublicIpPoolCompartmentDetails |
The configuration details for the move operation.
|
| ChangePublicIpPoolCompartmentDetails.Builder |
|
| ChangeRemotePeeringConnectionCompartmentDetails |
The configuration details for the move operation.
|
| ChangeRemotePeeringConnectionCompartmentDetails.Builder |
|
| ChangeRouteTableCompartmentDetails |
The configuration details for the move operation.
|
| ChangeRouteTableCompartmentDetails.Builder |
|
| ChangeSecurityListCompartmentDetails |
The configuration details for the move operation.
|
| ChangeSecurityListCompartmentDetails.Builder |
|
| ChangeServiceGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeServiceGatewayCompartmentDetails.Builder |
|
| ChangeSubnetCompartmentDetails |
The configuration details for the move operation.
|
| ChangeSubnetCompartmentDetails.Builder |
|
| ChangeVcnCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVcnCompartmentDetails.Builder |
|
| ChangeVirtualCircuitCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVirtualCircuitCompartmentDetails.Builder |
|
| ChangeVlanCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVlanCompartmentDetails.Builder |
|
| ChangeVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the volume backup to.
|
| ChangeVolumeBackupCompartmentDetails.Builder |
|
| ChangeVolumeCompartmentDetails |
Contains the details for the compartment to move the volume to.
|
| ChangeVolumeCompartmentDetails.Builder |
|
| ChangeVolumeGroupBackupCompartmentDetails |
Contains the details for the compartment to move the volume group backup to.
|
| ChangeVolumeGroupBackupCompartmentDetails.Builder |
|
| ChangeVolumeGroupCompartmentDetails |
Contains the details for the compartment to move the volume group to.
|
| ChangeVolumeGroupCompartmentDetails.Builder |
|
| ChangeVtapCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a virtual test access point (VTAP).
|
| ChangeVtapCompartmentDetails.Builder |
|
| ClusterConfigDetails |
The HPC cluster configuration requested when launching instances in a compute capacity
reservation.
|
| ClusterConfigDetails.Builder |
|
| ClusterConfigurationDetails |
The HPC cluster configuration requested when launching instances of a cluster network.
|
| ClusterConfigurationDetails.Builder |
|
| ClusterNetwork |
A cluster network is a group of high performance computing (HPC), GPU, or optimized bare metal
instances that are connected with an ultra low-latency remote direct memory access (RDMA)
network.
|
| ClusterNetwork.Builder |
|
| ClusterNetworkPlacementConfigurationDetails |
The location for where the instance pools in a cluster network will place instances.
|
| ClusterNetworkPlacementConfigurationDetails.Builder |
|
| ClusterNetworkSummary |
|
| ClusterNetworkSummary.Builder |
|
| CompartmentInternal |
Helper definition required to perform authZ using SPLAT expressions on a Compartment
Note: Objects should always be created or deserialized using the CompartmentInternal.Builder. |
| CompartmentInternal.Builder |
|
| ComputeBareMetalHost |
A compute bare metal host.
|
| ComputeBareMetalHost.Builder |
|
| ComputeBareMetalHostCollection |
A list of compute bare metal hosts.
|
| ComputeBareMetalHostCollection.Builder |
|
| ComputeBareMetalHostSummary |
Summary information for a compute bare metal host.
|
| ComputeBareMetalHostSummary.Builder |
|
| ComputeCapacityReport |
A report of the host capacity within an availability domain that is available for you to create
compute instances.
|
| ComputeCapacityReport.Builder |
|
| ComputeCapacityReservation |
A template that defines the settings to use when creating compute capacity reservations.
|
| ComputeCapacityReservation.Builder |
|
| ComputeCapacityReservationInstanceShapeSummary |
An available shape used to launch instances in a compute capacity reservation.
|
| ComputeCapacityReservationInstanceShapeSummary.Builder |
|
| ComputeCapacityReservationSummary |
Summary information for a compute capacity reservation.
|
| ComputeCapacityReservationSummary.Builder |
|
| ComputeCapacityTopology |
A compute capacity topology that allows you to query your bare metal hosts and their RDMA network
topology.
|
| ComputeCapacityTopology.Builder |
|
| ComputeCapacityTopologyCollection |
A list of compute capacity topologies.
|
| ComputeCapacityTopologyCollection.Builder |
|
| ComputeCapacityTopologySummary |
Summary information for a compute capacity topology.
|
| ComputeCapacityTopologySummary.Builder |
|
| ComputeCluster |
A remote direct memory access (RDMA) network group.
|
| ComputeCluster.Builder |
|
| ComputeClusterCollection |
A list of compute clusters that match filter criteria, if any.
|
| ComputeClusterCollection.Builder |
|
| ComputeClusterSummary |
Summary information for a compute cluster.
|
| ComputeClusterSummary.Builder |
|
| ComputeGlobalImageCapabilitySchema |
Compute Global Image Capability Schema is a container for a set of compute global image
capability schema versions
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchema.Builder. |
| ComputeGlobalImageCapabilitySchema.Builder |
|
| ComputeGlobalImageCapabilitySchemaSummary |
|
| ComputeGlobalImageCapabilitySchemaSummary.Builder |
|
| ComputeGlobalImageCapabilitySchemaVersion |
Compute Global Image Capability Schema Version is a set of all possible capabilities for a
collection of images.
|
| ComputeGlobalImageCapabilitySchemaVersion.Builder |
|
| ComputeGlobalImageCapabilitySchemaVersionSummary |
|
| ComputeGlobalImageCapabilitySchemaVersionSummary.Builder |
|
| ComputeGpuMemoryCluster |
The customer facing object includes GPU memory cluster details.
|
| ComputeGpuMemoryCluster.Builder |
|
| ComputeGpuMemoryClusterCollection |
A list of compute GPU memory clusters.
|
| ComputeGpuMemoryClusterCollection.Builder |
|
| ComputeGpuMemoryClusterInstanceCollection |
A list of compute GPU memory cluster instances.
|
| ComputeGpuMemoryClusterInstanceCollection.Builder |
|
| ComputeGpuMemoryClusterInstanceSummary |
The customer facing GPU memory cluster instance object details.
|
| ComputeGpuMemoryClusterInstanceSummary.Builder |
|
| ComputeGpuMemoryClusterSummary |
Summary model for listing Compute GPU Memory Clusters.
|
| ComputeGpuMemoryClusterSummary.Builder |
|
| ComputeGpuMemoryFabric |
The customer facing object includes GPU memory fabric details.
|
| ComputeGpuMemoryFabric.Builder |
|
| ComputeGpuMemoryFabricCollection |
A list of compute GPU memory fabrics.
|
| ComputeGpuMemoryFabricCollection.Builder |
|
| ComputeGpuMemoryFabricSummary |
Summary information for a compute GPU memory fabric.
|
| ComputeGpuMemoryFabricSummary.Builder |
|
| ComputeHost |
The customer facing object includes host details.
|
| ComputeHost.Builder |
|
| ComputeHostCollection |
A list of compute hosts.
|
| ComputeHostCollection.Builder |
|
| ComputeHostSummary |
Summary information for a compute host.
|
| ComputeHostSummary.Builder |
|
| ComputeHpcIsland |
A compute HPC island.
|
| ComputeHpcIsland.Builder |
|
| ComputeHpcIslandCollection |
A list of compute HPC islands.
|
| ComputeHpcIslandCollection.Builder |
|
| ComputeHpcIslandSummary |
Summary information for a compute HPC island.
|
| ComputeHpcIslandSummary.Builder |
|
| ComputeImageCapabilitySchema |
Compute Image Capability Schema is a set of capabilities that filter the compute global
capability schema version for an image.
|
| ComputeImageCapabilitySchema.Builder |
|
| ComputeImageCapabilitySchemaSummary |
|
| ComputeImageCapabilitySchemaSummary.Builder |
|
| ComputeInstanceDetails |
Compute Instance Configuration instance details.
|
| ComputeInstanceDetails.Builder |
|
| ComputeInstanceOptions |
Multiple Compute Instance Configuration instance details.
|
| ComputeInstanceOptions.Builder |
|
| ComputeNetworkBlock |
A compute network block.
|
| ComputeNetworkBlock.Builder |
|
| ComputeNetworkBlockCollection |
A list of compute network blocks.
|
| ComputeNetworkBlockCollection.Builder |
|
| ComputeNetworkBlockSummary |
Summary information for a compute network block.
|
| ComputeNetworkBlockSummary.Builder |
|
| ConnectLocalPeeringGatewaysDetails |
Information about the other local peering gateway (LPG).
|
| ConnectLocalPeeringGatewaysDetails.Builder |
|
| ConnectRemotePeeringConnectionsDetails |
Information about the other remote peering connection (RPC).
|
| ConnectRemotePeeringConnectionsDetails.Builder |
|
| ConsoleHistory |
An instance’s serial console data.
|
| ConsoleHistory.Builder |
|
| CopyBootVolumeBackupDetails |
|
| CopyBootVolumeBackupDetails.Builder |
|
| CopyVolumeBackupDetails |
|
| CopyVolumeBackupDetails.Builder |
|
| CopyVolumeGroupBackupDetails |
|
| CopyVolumeGroupBackupDetails.Builder |
|
| Cpe |
An object you create when setting up a Site-to-Site VPN between your on-premises network and VCN.
|
| Cpe.Builder |
|
| CpeDeviceConfigAnswer |
An individual answer to a CPE device question.
|
| CpeDeviceConfigAnswer.Builder |
|
| CpeDeviceConfigQuestion |
An individual question that the customer can answer about the CPE device.
|
| CpeDeviceConfigQuestion.Builder |
|
| CpeDeviceInfo |
Basic information about a particular CPE device type.
|
| CpeDeviceInfo.Builder |
|
| CpeDeviceShapeDetail |
The detailed information about a particular CPE device type.
|
| CpeDeviceShapeDetail.Builder |
|
| CpeDeviceShapeSummary |
A summary of information about a particular CPE device type.
|
| CpeDeviceShapeSummary.Builder |
|
| CreateAppCatalogSubscriptionDetails |
details for creating a subscription for a listing resource version.
|
| CreateAppCatalogSubscriptionDetails.Builder |
|
| CreateBootVolumeBackupDetails |
|
| CreateBootVolumeBackupDetails.Builder |
|
| CreateBootVolumeDetails |
|
| CreateBootVolumeDetails.Builder |
|
| CreateByoasnDetails |
The information used to create a Byoasn resource.
|
| CreateByoasnDetails.Builder |
|
| CreateByoipRangeDetails |
The information used to create a ByoipRange resource.
|
| CreateByoipRangeDetails.Builder |
|
| CreateCapacityReportShapeAvailabilityDetails |
Information about the shapes in a capacity report.
|
| CreateCapacityReportShapeAvailabilityDetails.Builder |
|
| CreateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
| CreateCaptureFilterDetails |
A capture filter contains a set of rules governing what traffic a VTAP mirrors or a VCN flow log
collects.
|
| CreateCaptureFilterDetails.Builder |
|
| CreateClusterNetworkDetails |
|
| CreateClusterNetworkDetails.Builder |
|
| CreateClusterNetworkInstancePoolDetails |
The data to create an instance pool in a cluster network.
|
| CreateClusterNetworkInstancePoolDetails.Builder |
|
| CreateComputeCapacityReportDetails |
The data to create a report of available Compute capacity.
|
| CreateComputeCapacityReportDetails.Builder |
|
| CreateComputeCapacityReservationDetails |
The details for creating a new compute capacity reservation.
|
| CreateComputeCapacityReservationDetails.Builder |
|
| CreateComputeCapacityTopologyDetails |
The details for creating a new compute capacity topology.
|
| CreateComputeCapacityTopologyDetails.Builder |
|
| CreateComputeClusterDetails |
|
| CreateComputeClusterDetails.Builder |
|
| CreateComputeGpuMemoryClusterDetails |
The customer facing object includes GPU memory cluster details.
|
| CreateComputeGpuMemoryClusterDetails.Builder |
|
| CreateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
| CreateComputeImageCapabilitySchemaDetails.Builder |
|
| CreateCpeDetails |
|
| CreateCpeDetails.Builder |
|
| CreateCrossConnectDetails |
|
| CreateCrossConnectDetails.Builder |
|
| CreateCrossConnectGroupDetails |
|
| CreateCrossConnectGroupDetails.Builder |
|
| CreateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a customer.
|
| CreateDedicatedCapacitySourceDetails.Builder |
|
| CreateDedicatedVmHostDetails |
The details for creating a new dedicated virtual machine host.
|
| CreateDedicatedVmHostDetails.Builder |
|
| CreateDhcpDetails |
|
| CreateDhcpDetails.Builder |
|
| CreateDrgAttachmentDetails |
|
| CreateDrgAttachmentDetails.Builder |
|
| CreateDrgDetails |
|
| CreateDrgDetails.Builder |
|
| CreateDrgRouteDistributionDetails |
Details used to create a route distribution.
|
| CreateDrgRouteDistributionDetails.Builder |
|
| CreateDrgRouteTableDetails |
Details used in a request to create a DRG route table.
|
| CreateDrgRouteTableDetails.Builder |
|
| CreateImageDetails |
Either instanceId or imageSourceDetails must be provided in addition to other required
parameters.
|
| CreateImageDetails.Builder |
|
| CreateInstanceConfigurationBase |
Creation details for an instance configuration.
|
| CreateInstanceConfigurationDetails |
Details for creating an instance configuration by providing a list of configuration settings.
|
| CreateInstanceConfigurationDetails.Builder |
|
| CreateInstanceConfigurationFromInstanceDetails |
Details for creating an instance configuration using an existing instance as a template.
|
| CreateInstanceConfigurationFromInstanceDetails.Builder |
|
| CreateInstanceConsoleConnectionDetails |
The details for creating a instance console connection.
|
| CreateInstanceConsoleConnectionDetails.Builder |
|
| CreateInstancePoolDetails |
The data to create an instance pool.
|
| CreateInstancePoolDetails.Builder |
|
| CreateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
| CreateInstancePoolPlacementConfigurationDetails.Builder |
|
| CreateInternetGatewayDetails |
|
| CreateInternetGatewayDetails.Builder |
|
| CreateIPSecConnectionDetails |
|
| CreateIPSecConnectionDetails.Builder |
|
| CreateIPSecConnectionTunnelDetails |
|
| CreateIPSecConnectionTunnelDetails.Builder |
|
| CreateIPSecTunnelBgpSessionDetails |
|
| CreateIPSecTunnelBgpSessionDetails.Builder |
|
| CreateIPSecTunnelEncryptionDomainDetails |
Request to enable a multi-encryption domain policy on the IPSec tunnel.
|
| CreateIPSecTunnelEncryptionDomainDetails.Builder |
|
| CreateIpv6Details |
|
| CreateIpv6Details.Builder |
|
| CreateLocalPeeringGatewayDetails |
|
| CreateLocalPeeringGatewayDetails.Builder |
|
| CreateMacsecKey |
Defines the secret OCIDs
held in Vault that represent the MACsec key. |
| CreateMacsecKey.Builder |
|
| CreateMacsecProperties |
Properties used to configure MACsec (if capable).
|
| CreateMacsecProperties.Builder |
|
| CreateNatGatewayDetails |
|
| CreateNatGatewayDetails.Builder |
|
| CreateNetworkSecurityGroupDetails |
|
| CreateNetworkSecurityGroupDetails.Builder |
|
| CreatePrivateIpDetails |
|
| CreatePrivateIpDetails.Builder |
|
| CreatePublicIpDetails |
|
| CreatePublicIpDetails.Builder |
|
| CreatePublicIpPoolDetails |
The information used to create a public IP pool.
|
| CreatePublicIpPoolDetails.Builder |
|
| CreateRemotePeeringConnectionDetails |
|
| CreateRemotePeeringConnectionDetails.Builder |
|
| CreateRouteTableDetails |
|
| CreateRouteTableDetails.Builder |
|
| CreateSecurityListDetails |
|
| CreateSecurityListDetails.Builder |
|
| CreateServiceGatewayDetails |
|
| CreateServiceGatewayDetails.Builder |
|
| CreateSubnetDetails |
|
| CreateSubnetDetails.Builder |
|
| CreateVcnDetails |
|
| CreateVcnDetails.Builder |
|
| CreateVirtualCircuitDetails |
|
| CreateVirtualCircuitDetails.Builder |
|
| CreateVirtualCircuitPublicPrefixDetails |
|
| CreateVirtualCircuitPublicPrefixDetails.Builder |
|
| CreateVlanDetails |
|
| CreateVlanDetails.Builder |
|
| CreateVnicDetails |
Contains properties for a VNIC.
|
| CreateVnicDetails.Builder |
|
| CreateVolumeBackupDetails |
|
| CreateVolumeBackupDetails.Builder |
|
| CreateVolumeBackupPolicyAssignmentDetails |
|
| CreateVolumeBackupPolicyAssignmentDetails.Builder |
|
| CreateVolumeBackupPolicyDetails |
Specifies the properties for creating user defined backup policy.
|
| CreateVolumeBackupPolicyDetails.Builder |
|
| CreateVolumeDetails |
The details of the volume to create.
|
| CreateVolumeDetails.Builder |
|
| CreateVolumeGroupBackupDetails |
|
| CreateVolumeGroupBackupDetails.Builder |
|
| CreateVolumeGroupDetails |
|
| CreateVolumeGroupDetails.Builder |
|
| CreateVtapDetails |
These details are included in a request to create a virtual test access point (VTAP).
|
| CreateVtapDetails.Builder |
|
| CrossConnect |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnect.Builder |
|
| CrossConnectGroup |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectGroup.Builder |
|
| CrossConnectLocation |
An individual FastConnect location.
|
| CrossConnectLocation.Builder |
|
| CrossConnectMapping |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMapping.Builder |
|
| CrossConnectMappingDetails |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMappingDetails.Builder |
|
| CrossConnectMappingDetailsCollection |
|
| CrossConnectMappingDetailsCollection.Builder |
|
| CrossConnectPortSpeedShape |
An individual port speed level for cross-connects.
|
| CrossConnectPortSpeedShape.Builder |
|
| CrossConnectStatus |
The status of the cross-connect.
|
| CrossConnectStatus.Builder |
|
| DedicatedCapacitySource |
A capacity source of bare metal hosts that is dedicated to a user.
|
| DedicatedCapacitySource.Builder |
|
| DedicatedVmHost |
A dedicated virtual machine host lets you host multiple VM instances on a dedicated server that
is not shared with other tenancies.
|
| DedicatedVmHost.Builder |
|
| DedicatedVmHostInstanceShapeSummary |
The shape used to launch instances associated with the dedicated VM host.
|
| DedicatedVmHostInstanceShapeSummary.Builder |
|
| DedicatedVmHostInstanceSummary |
Condensed instance data when listing instances on a dedicated VM host.
|
| DedicatedVmHostInstanceSummary.Builder |
|
| DedicatedVmHostShapeSummary |
The shape used to launch the dedicated virtual machine (VM) host.
|
| DedicatedVmHostShapeSummary.Builder |
|
| DedicatedVmHostSummary |
A dedicated virtual machine (VM) host lets you host multiple instances on a dedicated server that
is not shared with other tenancies.
|
| DedicatedVmHostSummary.Builder |
|
| DefaultDrgRouteTables |
The default DRG route table for this DRG.
|
| DefaultDrgRouteTables.Builder |
|
| DefaultPhaseOneParameters |
Default phase one parameters.
|
| DefaultPhaseOneParameters.Builder |
|
| DefaultPhaseTwoParameters |
Default phase two parameters.
|
| DefaultPhaseTwoParameters.Builder |
|
| DeleteVirtualCircuitPublicPrefixDetails |
|
| DeleteVirtualCircuitPublicPrefixDetails.Builder |
|
| DetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
| DetachedVolumeAutotunePolicy.Builder |
|
| DetachInstancePoolInstanceDetails |
An instance that is to be detached from an instance pool.
|
| DetachInstancePoolInstanceDetails.Builder |
|
| DetachLoadBalancerDetails |
Represents a load balancer that is to be detached from an instance pool.
|
| DetachLoadBalancerDetails.Builder |
|
| Device |
Device Path corresponding to the block devices attached to instances having a name and
isAvailable flag.
|
| Device.Builder |
|
| DhcpDnsOption |
DHCP option for specifying how DNS (hostname resolution) is handled in the subnets in the VCN.
|
| DhcpDnsOption.Builder |
|
| DhcpOption |
A single DHCP option according to RFC 1533. |
| DhcpOptions |
A set of DHCP options.
|
| DhcpOptions.Builder |
|
| DhcpSearchDomainOption |
DHCP option for specifying a search domain name for DNS queries.
|
| DhcpSearchDomainOption.Builder |
|
| DpdConfig |
These configuration details are used for dead peer detection (DPD).
|
| DpdConfig.Builder |
|
| Drg |
A dynamic routing gateway (DRG) is a virtual router that provides a path for private network
traffic between networks.
|
| Drg.Builder |
|
| DrgAttachment |
A DRG attachment serves as a link between a DRG and a network resource.
|
| DrgAttachment.Builder |
|
| DrgAttachmentIdDrgRouteDistributionMatchCriteria |
The criteria by which a specific attachment will import routes to the DRG.
|
| DrgAttachmentIdDrgRouteDistributionMatchCriteria.Builder |
|
| DrgAttachmentInfo |
The DrgAttachmentInfo resource contains the
OCID of the DRG
attachment. |
| DrgAttachmentInfo.Builder |
|
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria |
All routes are imported or exported.
|
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria.Builder |
|
| DrgAttachmentNetworkCreateDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| DrgAttachmentNetworkDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| DrgAttachmentNetworkUpdateDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria |
The attachment type from which the DRG will import routes.
|
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria.Builder |
|
| DrgRedundancyStatus |
The redundancy status of the DRG.
|
| DrgRedundancyStatus.Builder |
|
| DrgRouteDistribution |
A route distribution establishes how routes get imported into DRG route tables and exported
through the DRG attachments.
|
| DrgRouteDistribution.Builder |
|
| DrgRouteDistributionMatchCriteria |
The match criteria in a route distribution statement.
|
| DrgRouteDistributionStatement |
A single statement within a route distribution.
|
| DrgRouteDistributionStatement.Builder |
|
| DrgRouteRule |
A DRG route rule is a mapping between a destination IP address range and a DRG attachment.
|
| DrgRouteRule.Builder |
|
| DrgRouteTable |
All routing inside the DRG is driven by the contents of DRG route tables.
|
| DrgRouteTable.Builder |
|
| EgressSecurityRule |
A rule for allowing outbound IP packets.
|
| EgressSecurityRule.Builder |
|
| EmulatedVolumeAttachment |
An Emulated volume attachment.
|
| EmulatedVolumeAttachment.Builder |
|
| EncryptionDomainConfig |
Configuration information used by the encryption domain policy.
|
| EncryptionDomainConfig.Builder |
|
| EnumIntegerImageCapabilityDescriptor |
|
| EnumIntegerImageCapabilityDescriptor.Builder |
|
| EnumStringImageCapabilitySchemaDescriptor |
|
| EnumStringImageCapabilitySchemaDescriptor.Builder |
|
| ExportImageDetails |
The destination details for the image export.
|
| ExportImageViaObjectStorageTupleDetails |
|
| ExportImageViaObjectStorageTupleDetails.Builder |
|
| ExportImageViaObjectStorageUriDetails |
|
| ExportImageViaObjectStorageUriDetails.Builder |
|
| FastConnectProviderService |
A service offering from a supported provider.
|
| FastConnectProviderService.Builder |
|
| FastConnectProviderServiceKey |
A provider service key and its details.
|
| FastConnectProviderServiceKey.Builder |
|
| FlowLogCaptureFilterRuleDetails |
The set of rules governing what traffic the VCN flow log collects.
|
| FlowLogCaptureFilterRuleDetails.Builder |
|
| GenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
| GenericBmLaunchInstancePlatformConfig.Builder |
|
| GenericBmPlatformConfig |
The standard platform configuration of a bare metal instance.
|
| GenericBmPlatformConfig.Builder |
|
| GetIpInventoryVcnOverlapDetails |
Lists the compartment to find VCN overlap.
|
| GetIpInventoryVcnOverlapDetails.Builder |
|
| GetPublicIpByIpAddressDetails |
IP address of the public IP.
|
| GetPublicIpByIpAddressDetails.Builder |
|
| GetPublicIpByPrivateIpIdDetails |
Details of the private IP that the public IP is assigned to.
|
| GetPublicIpByPrivateIpIdDetails.Builder |
|
| IcmpOptions |
Optional and valid only for ICMP and ICMPv6.
|
| IcmpOptions.Builder |
|
| Image |
A boot disk image for launching an instance.
|
| Image.Builder |
|
| ImageCapabilitySchemaDescriptor |
Image Capability Schema Descriptor is a type of capability for an image.
|
| ImageMemoryConstraints |
For a flexible image and shape, the amount of memory supported for instances that use this image.
|
| ImageMemoryConstraints.Builder |
|
| ImageOcpuConstraints |
OCPU options for an image and shape.
|
| ImageOcpuConstraints.Builder |
|
| ImageShapeCompatibilityEntry |
An image and shape that are compatible.
|
| ImageShapeCompatibilityEntry.Builder |
|
| ImageShapeCompatibilitySummary |
Summary information for a compatible image and shape.
|
| ImageShapeCompatibilitySummary.Builder |
|
| ImageSourceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| ImageSourceViaObjectStorageTupleDetails |
|
| ImageSourceViaObjectStorageTupleDetails.Builder |
|
| ImageSourceViaObjectStorageUriDetails |
|
| ImageSourceViaObjectStorageUriDetails.Builder |
|
| IngressSecurityRule |
A rule for allowing inbound IP packets.
|
| IngressSecurityRule.Builder |
|
| Instance |
A compute host.
|
| Instance.Builder |
|
| InstanceAgentConfig |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| InstanceAgentConfig.Builder |
|
| InstanceAgentFeatures |
Oracle Cloud Agent features supported on the image.
|
| InstanceAgentFeatures.Builder |
|
| InstanceAgentPluginConfigDetails |
The configuration of plugins associated with this instance.
|
| InstanceAgentPluginConfigDetails.Builder |
|
| InstanceAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
| InstanceAvailabilityConfig.Builder |
|
| InstanceConfiguration |
An instance configuration is a template that defines the settings to use when creating Compute
instances.
|
| InstanceConfiguration.Builder |
|
| InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
| InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
| InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationAmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
| InstanceConfigurationAmdVmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationAttachVnicDetails |
|
| InstanceConfigurationAttachVnicDetails.Builder |
|
| InstanceConfigurationAttachVolumeDetails |
Volume attachmentDetails.
|
| InstanceConfigurationAutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
| InstanceConfigurationAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
| InstanceConfigurationAvailabilityConfig.Builder |
|
| InstanceConfigurationBlockVolumeDetails |
Create new block volumes or attach to an existing volume.
|
| InstanceConfigurationBlockVolumeDetails.Builder |
|
| InstanceConfigurationBlockVolumeReplicaDetails |
|
| InstanceConfigurationBlockVolumeReplicaDetails.Builder |
|
| InstanceConfigurationCreateVnicDetails |
Contains the properties of the VNIC for an instance configuration.
|
| InstanceConfigurationCreateVnicDetails.Builder |
|
| InstanceConfigurationCreateVolumeDetails |
Creates a new block volume.
|
| InstanceConfigurationCreateVolumeDetails.Builder |
|
| InstanceConfigurationDetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
| InstanceConfigurationDetachedVolumeAutotunePolicy.Builder |
|
| InstanceConfigurationGenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
| InstanceConfigurationGenericBmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationInstanceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| InstanceConfigurationInstanceOptions |
Optional mutable instance options.
|
| InstanceConfigurationInstanceOptions.Builder |
|
| InstanceConfigurationInstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| InstanceConfigurationInstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
| InstanceConfigurationInstanceSourceImageFilterDetails.Builder |
|
| InstanceConfigurationInstanceSourceViaBootVolumeDetails |
|
| InstanceConfigurationInstanceSourceViaBootVolumeDetails.Builder |
|
| InstanceConfigurationInstanceSourceViaImageDetails |
|
| InstanceConfigurationInstanceSourceViaImageDetails.Builder |
|
| InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
| InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationIntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
| InstanceConfigurationIntelVmLaunchInstancePlatformConfig.Builder |
|
| InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails |
Optional.
|
| InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails.Builder |
|
| InstanceConfigurationIscsiAttachVolumeDetails |
|
| InstanceConfigurationIscsiAttachVolumeDetails.Builder |
|
| InstanceConfigurationLaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| InstanceConfigurationLaunchInstanceAgentConfigDetails.Builder |
|
| InstanceConfigurationLaunchInstanceDetails |
Instance launch details for creating an instance from an instance configuration.
|
| InstanceConfigurationLaunchInstanceDetails.Builder |
|
| InstanceConfigurationLaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
| InstanceConfigurationLaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| InstanceConfigurationLaunchInstanceShapeConfigDetails.Builder |
|
| InstanceConfigurationLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| InstanceConfigurationLaunchOptions.Builder |
|
| InstanceConfigurationParavirtualizedAttachVolumeDetails |
|
| InstanceConfigurationParavirtualizedAttachVolumeDetails.Builder |
|
| InstanceConfigurationPerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume\u2019s performance limited up to Maximum VPUs/GB.
|
| InstanceConfigurationPerformanceBasedAutotunePolicy.Builder |
|
| InstanceConfigurationSummary |
Summary information for an instance configuration.
|
| InstanceConfigurationSummary.Builder |
|
| InstanceConfigurationVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| InstanceConfigurationVolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
| InstanceConfigurationVolumeSourceFromVolumeBackupDetails.Builder |
|
| InstanceConfigurationVolumeSourceFromVolumeDetails |
Specifies the source volume.
|
| InstanceConfigurationVolumeSourceFromVolumeDetails.Builder |
|
| InstanceConsoleConnection |
The InstanceConsoleConnection API provides you with console access to Compute instances,
enabling you to troubleshoot malfunctioning instances remotely.
|
| InstanceConsoleConnection.Builder |
|
| InstanceCredentials |
The credentials for a particular instance.
|
| InstanceCredentials.Builder |
|
| InstanceMaintenanceEvent |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
| InstanceMaintenanceEvent.Builder |
|
| InstanceMaintenanceEventSummary |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
| InstanceMaintenanceEventSummary.Builder |
|
| InstanceMaintenanceReboot |
The maximum possible date and time that a maintenance reboot can be extended.
|
| InstanceMaintenanceReboot.Builder |
|
| InstanceOptions |
Optional mutable instance options
Note: Objects should always be created or deserialized using the InstanceOptions.Builder. |
| InstanceOptions.Builder |
|
| InstancePool |
An instance pool is a set of instances within the same region that are managed as a group.
|
| InstancePool.Builder |
|
| InstancePoolInstance |
Information about an instance that belongs to an instance pool.
|
| InstancePoolInstance.Builder |
|
| InstancePoolInstanceLoadBalancerBackend |
Represents the load balancer Backend that is configured for an instance pool instance.
|
| InstancePoolInstanceLoadBalancerBackend.Builder |
|
| InstancePoolLoadBalancerAttachment |
Represents a load balancer that is attached to an instance pool.
|
| InstancePoolLoadBalancerAttachment.Builder |
|
| InstancePoolPlacementConfiguration |
The location for where an instance pool will place instances.
|
| InstancePoolPlacementConfiguration.Builder |
|
| InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails |
Optional.
|
| InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails.Builder |
|
| InstancePoolPlacementPrimarySubnet |
Details about the IPv6 primary subnet.
|
| InstancePoolPlacementPrimarySubnet.Builder |
|
| InstancePoolPlacementSecondaryVnicSubnet |
The secondary VNIC object for the placement configuration for an instance pool.
|
| InstancePoolPlacementSecondaryVnicSubnet.Builder |
|
| InstancePoolPlacementSubnetDetails |
Base details about the IPv6 subnet.
|
| InstancePoolPlacementSubnetDetails.Builder |
|
| InstancePoolSummary |
Summary information for an instance pool.
|
| InstancePoolSummary.Builder |
|
| InstancePowerActionDetails |
A base object for all types of instance power action requests.
|
| InstanceReservationConfig |
Data that defines the capacity configuration.
|
| InstanceReservationConfig.Builder |
|
| InstanceReservationConfigDetails |
A template that contains the settings to use when defining the instance capacity configuration.
|
| InstanceReservationConfigDetails.Builder |
|
| InstanceReservationShapeConfigDetails |
The shape configuration requested when launching instances in a compute capacity reservation.
|
| InstanceReservationShapeConfigDetails.Builder |
|
| InstanceShapeConfig |
The shape configuration for an instance.
|
| InstanceShapeConfig.Builder |
|
| InstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder.
|
| InstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
| InstanceSourceImageFilterDetails.Builder |
|
| InstanceSourceViaBootVolumeDetails |
|
| InstanceSourceViaBootVolumeDetails.Builder |
|
| InstanceSourceViaImageDetails |
|
| InstanceSourceViaImageDetails.Builder |
|
| InstanceSummary |
Condensed instance data when listing instances in an instance pool.
|
| InstanceSummary.Builder |
|
| IntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| IntelIcelakeBmLaunchInstancePlatformConfig.Builder |
|
| IntelIcelakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard3.64 shape or the
BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| IntelIcelakeBmPlatformConfig.Builder |
|
| IntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with an Intel X7-based
processor (the Intel Skylake platform).
|
| IntelSkylakeBmLaunchInstancePlatformConfig.Builder |
|
| IntelSkylakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses one of the following shapes:
BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
| IntelSkylakeBmPlatformConfig.Builder |
|
| IntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
| IntelVmLaunchInstancePlatformConfig.Builder |
|
| IntelVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the Intel platform.
|
| IntelVmPlatformConfig.Builder |
|
| IntelVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the Intel platform.
|
| IntelVmUpdateInstancePlatformConfig.Builder |
|
| InternetGateway |
Represents a router that connects the edge of a VCN with the Internet.
|
| InternetGateway.Builder |
|
| InventoryIpAddressSummary |
Provides the IP address and its corresponding VNIC ID, VNIC name, and DNS hostname.
|
| InventoryIpAddressSummary.Builder |
|
| InventoryResourceSummary |
Lists resources and its properties under a given subnet.
|
| InventoryResourceSummary.Builder |
|
| InventorySubnetCidrBlockSummary |
Lists CIDRs and utilization within a subnet.
|
| InventorySubnetCidrBlockSummary.Builder |
|
| InventorySubnetSummary |
Lists subnet and its associated resources.
|
| InventorySubnetSummary.Builder |
|
| InventoryVcnCidrBlockSummary |
Lists the CIDRs and utilization within a VCN.
|
| InventoryVcnCidrBlockSummary.Builder |
|
| InventoryVcnSummary |
Provides the summary of a VCN’s IP Inventory data under specified compartments.
|
| InventoryVcnSummary.Builder |
|
| Ipam |
An IPAM refers to a group of VCNs, subnets, IP resources and its related properties.
|
| Ipam.Builder |
|
| IpInventoryCidrUtilizationCollection |
The IP Inventory CIDR utilization details of a subnet.
|
| IpInventoryCidrUtilizationCollection.Builder |
|
| IpInventoryCidrUtilizationSummary |
The CIDR utilization details of a subnet.
|
| IpInventoryCidrUtilizationSummary.Builder |
|
| IpInventoryCollection |
The results returned by a ListIpInventory operation.
|
| IpInventoryCollection.Builder |
|
| IpInventorySubnetResourceCollection |
The results returned by a ListIpInventorySubnet operation.
|
| IpInventorySubnetResourceCollection.Builder |
|
| IpInventorySubnetResourceSummary |
Provides the IP Inventory details of a subnet and its associated resources.
|
| IpInventorySubnetResourceSummary.Builder |
|
| IpInventoryVcnOverlapCollection |
The details of the overlapping VCNs and compartments.
|
| IpInventoryVcnOverlapCollection.Builder |
|
| IpInventoryVcnOverlapSummary |
Provides the VCN overlap details.
|
| IpInventoryVcnOverlapSummary.Builder |
|
| IPSecConnection |
A connection between a DRG and CPE.
|
| IPSecConnection.Builder |
|
| IPSecConnectionDeviceConfig |
Deprecated.
|
| IPSecConnectionDeviceConfig.Builder |
|
| IPSecConnectionDeviceStatus |
Deprecated.
|
| IPSecConnectionDeviceStatus.Builder |
|
| IPSecConnectionTunnel |
Information about a single IPSec tunnel in an IPSec connection.
|
| IPSecConnectionTunnel.Builder |
|
| IPSecConnectionTunnelErrorDetails |
Details for an error on an IPSec tunnel.
|
| IPSecConnectionTunnelErrorDetails.Builder |
|
| IPSecConnectionTunnelSharedSecret |
The tunnel’s shared secret (pre-shared key).
|
| IPSecConnectionTunnelSharedSecret.Builder |
|
| IpsecTunnelDrgAttachmentNetworkDetails |
Specifies the IPSec tunnel attached to the DRG.
|
| IpsecTunnelDrgAttachmentNetworkDetails.Builder |
|
| Ipv6 |
An IPv6 is a conceptual term that refers to an IPv6 address and related properties.
|
| Ipv6.Builder |
|
| Ipv6AddressIpv6SubnetCidrPairDetails |
Details to assign an IPv6 subnet prefix and IPv6 address on VNIC creation.
|
| Ipv6AddressIpv6SubnetCidrPairDetails.Builder |
|
| IScsiVolumeAttachment |
An ISCSI volume attachment.
|
| IScsiVolumeAttachment.Builder |
|
| LaunchAttachIScsiVolumeDetails |
Details specific to ISCSI type volume attachments.
|
| LaunchAttachIScsiVolumeDetails.Builder |
|
| LaunchAttachParavirtualizedVolumeDetails |
Details specific to PV type volume attachments.
|
| LaunchAttachParavirtualizedVolumeDetails.Builder |
|
| LaunchAttachVolumeDetails |
The details of the volume to attach.
|
| LaunchCreateVolumeDetails |
Define a volume that will be created and attached or attached to an instance on creation.
|
| LaunchCreateVolumeFromAttributes |
The details of the volume to create for CreateVolume operation.
|
| LaunchCreateVolumeFromAttributes.Builder |
|
| LaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| LaunchInstanceAgentConfigDetails.Builder |
|
| LaunchInstanceAvailabilityConfigDetails |
Options for VM migration during infrastructure maintenance events and for defining the
availability of a VM instance after a maintenance event that impacts the underlying hardware.
|
| LaunchInstanceAvailabilityConfigDetails.Builder |
|
| LaunchInstanceDetails |
Instance launch details.
|
| LaunchInstanceDetails.Builder |
|
| LaunchInstanceLicensingConfig |
The license config requested for the instance.
|
| LaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
| LaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| LaunchInstanceShapeConfigDetails.Builder |
|
| LaunchInstanceWindowsLicensingConfig |
The default windows licensing config.
|
| LaunchInstanceWindowsLicensingConfig.Builder |
|
| LaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| LaunchOptions.Builder |
|
| LetterOfAuthority |
The Letter of Authority for the cross-connect.
|
| LetterOfAuthority.Builder |
|
| LicensingConfig |
Configuration of the Operating System license.
|
| LicensingConfig.Builder |
|
| ListIpInventoryDetails |
Required input parameters for retrieving IP Inventory data within the specified compartments of a
region.
|
| ListIpInventoryDetails.Builder |
|
| LocalPeeringGateway |
A local peering gateway (LPG) is an object on a VCN that lets that VCN peer with another VCN in
the same region.
|
| LocalPeeringGateway.Builder |
|
| LoopBackDrgAttachmentNetworkDetails |
Specifies the loopback attachment on the DRG.
|
| LoopBackDrgAttachmentNetworkDetails.Builder |
|
| MacsecKey |
An object defining the Secrets-in-Vault OCIDs representing the MACsec key.
|
| MacsecKey.Builder |
|
| MacsecProperties |
Properties used for MACsec (if capable).
|
| MacsecProperties.Builder |
|
| MeasuredBootEntry |
One Trusted Platform Module (TPM) Platform Configuration Register (PCR) entry.
|
| MeasuredBootEntry.Builder |
|
| MeasuredBootReport |
The measured boot report for a shielded instance.
|
| MeasuredBootReport.Builder |
|
| MeasuredBootReportMeasurements |
A list of Trusted Platform Module (TPM) Platform Configuration Register (PCR) entries.
|
| MeasuredBootReportMeasurements.Builder |
|
| MemberReplica |
OCIDs for the volume replicas in this volume group replica.
|
| MemberReplica.Builder |
|
| ModifyVcnCidrDetails |
Details for updating a CIDR block.
|
| ModifyVcnCidrDetails.Builder |
|
| MultipathDevice |
Secondary multipath device, it uses the charUsername and chapSecret from primary volume
attachment
Note: Objects should always be created or deserialized using the MultipathDevice.Builder. |
| MultipathDevice.Builder |
|
| NatGateway |
A NAT (Network Address Translation) gateway, which represents a router that lets instances
without public IPs contact the public internet without exposing the instance to inbound internet
traffic.
|
| NatGateway.Builder |
|
| NetworkingTopology |
Defines the representation of a virtual network topology for a region.
|
| NetworkingTopology.Builder |
|
| NetworkSecurityGroup |
A network security group (NSG) provides virtual firewall rules for a specific set of Vnic in a VCN. |
| NetworkSecurityGroup.Builder |
|
| NetworkSecurityGroupVnic |
Information about a VNIC that belongs to a network security group.
|
| NetworkSecurityGroupVnic.Builder |
|
| ParavirtualizedVolumeAttachment |
A paravirtualized volume attachment.
|
| ParavirtualizedVolumeAttachment.Builder |
|
| PeerRegionForRemotePeering |
Details about a region that supports remote VCN peering.
|
| PeerRegionForRemotePeering.Builder |
|
| PercentageOfCoresEnabledOptions |
Configuration options for the percentage of cores enabled.
|
| PercentageOfCoresEnabledOptions.Builder |
|
| PerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume\u2019s performance limited up to Maximum VPUs/GB.
|
| PerformanceBasedAutotunePolicy.Builder |
|
| PhaseOneConfigDetails |
Configuration details for IKE phase one (ISAKMP) configuration parameters.
|
| PhaseOneConfigDetails.Builder |
|
| PhaseTwoConfigDetails |
Configuration details for IPSec phase two configuration parameters.
|
| PhaseTwoConfigDetails.Builder |
|
| PlatformConfig |
The platform configuration for the instance.
|
| PortRange |
|
| PortRange.Builder |
|
| PreemptibleInstanceConfigDetails |
Configuration options for preemptible instances.
|
| PreemptibleInstanceConfigDetails.Builder |
|
| PreemptionAction |
The action to run when the preemptible instance is interrupted for eviction.
|
| PrivateIp |
A private IP is a conceptual term that refers to an IPv4 private IP address and related
properties.
|
| PrivateIp.Builder |
|
| PublicIp |
A public IP is a conceptual term that refers to a public IP address and related properties.
|
| PublicIp.Builder |
|
| PublicIpPool |
A public IP pool is a set of public IP addresses represented as one or more IPv4 CIDR blocks.
|
| PublicIpPool.Builder |
|
| PublicIpPoolCollection |
Results of a ListPublicIpPool operation.
|
| PublicIpPoolCollection.Builder |
|
| PublicIpPoolSummary |
Summary information about a public IP pool.
|
| PublicIpPoolSummary.Builder |
|
| RebootMigrateActionDetails |
Parameters for the rebootMigrate instanceAction.
|
| RebootMigrateActionDetails.Builder |
|
| RemotePeeringConnection |
A remote peering connection (RPC) is an object on a DRG that lets the VCN that is attached to the
DRG peer with a VCN in a different region.
|
| RemotePeeringConnection.Builder |
|
| RemotePeeringConnectionDrgAttachmentNetworkDetails |
Specifies the DRG attachment to another DRG.
|
| RemotePeeringConnectionDrgAttachmentNetworkDetails.Builder |
|
| RemoveDrgRouteDistributionStatementsDetails |
Details request to remove statements from a route distribution.
|
| RemoveDrgRouteDistributionStatementsDetails.Builder |
|
| RemoveDrgRouteRulesDetails |
Details used in a request to remove static routes from a DRG route table.
|
| RemoveDrgRouteRulesDetails.Builder |
|
| RemoveNetworkSecurityGroupSecurityRulesDetails |
|
| RemoveNetworkSecurityGroupSecurityRulesDetails.Builder |
|
| RemovePublicIpPoolCapacityDetails |
The information needed to remove capacity from a public IP pool.
|
| RemovePublicIpPoolCapacityDetails.Builder |
|
| RemoveSubnetIpv6CidrDetails |
Details object for removing an IPv6 prefix from a subnet.
|
| RemoveSubnetIpv6CidrDetails.Builder |
|
| RemoveVcnCidrDetails |
Details for removing a CIDR block from a VCN.
|
| RemoveVcnCidrDetails.Builder |
|
| RemoveVcnIpv6CidrDetails |
Details used when removing ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or
BYOIPv6 prefix.
|
| RemoveVcnIpv6CidrDetails.Builder |
|
| ResetActionDetails |
Parameters for the reset instanceAction.
|
| ResetActionDetails.Builder |
|
| RouteRule |
A mapping between a destination IP address range and a virtual device to route matching packets
to (a target).
|
| RouteRule.Builder |
|
| RouteTable |
A collection of RouteRule objects, which are used to route packets based on destination
IP to a particular network entity.
|
| RouteTable.Builder |
|
| SecurityList |
A set of virtual firewall rules for your VCN.
|
| SecurityList.Builder |
|
| SecurityRule |
|
| SecurityRule.Builder |
|
| Service |
An object that represents one or multiple Oracle services that you can enable for a ServiceGateway. |
| Service.Builder |
|
| ServiceGateway |
Represents a router that lets your VCN privately access specific Oracle services such as Object
Storage without exposing the VCN to the public internet.
|
| ServiceGateway.Builder |
|
| ServiceIdRequestDetails |
|
| ServiceIdRequestDetails.Builder |
|
| ServiceIdResponseDetails |
|
| ServiceIdResponseDetails.Builder |
|
| SetOriginAsnDetails |
|
| SetOriginAsnDetails.Builder |
|
| Shape |
A compute instance shape that can be used in launchInstance.
|
| Shape.Builder |
|
| ShapeAccessControlServiceEnabledPlatformOptions |
Configuration options for the Access Control Service.
|
| ShapeAccessControlServiceEnabledPlatformOptions.Builder |
|
| ShapeAlternativeObject |
The shape that Oracle recommends you to use an alternative to the current shape.
|
| ShapeAlternativeObject.Builder |
|
| ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions |
Configuration options for the input-output memory management unit (IOMMU).
|
| ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions.Builder |
|
| ShapeMaxVnicAttachmentOptions |
For a flexible shape, the number of VNIC attachments that are available for instances that use
this shape.
|
| ShapeMaxVnicAttachmentOptions.Builder |
|
| ShapeMeasuredBootOptions |
Configuration options for the Measured Boot feature.
|
| ShapeMeasuredBootOptions.Builder |
|
| ShapeMemoryEncryptionOptions |
Configuration options for memory encryption.
|
| ShapeMemoryEncryptionOptions.Builder |
|
| ShapeMemoryOptions |
For a flexible shape, the amount of memory available for instances that use this shape.
|
| ShapeMemoryOptions.Builder |
|
| ShapeNetworkingBandwidthOptions |
For a flexible shape, the amount of networking bandwidth available for instances that use this
shape.
|
| ShapeNetworkingBandwidthOptions.Builder |
|
| ShapeNumaNodesPerSocketPlatformOptions |
Configuration options for NUMA nodes per socket.
|
| ShapeNumaNodesPerSocketPlatformOptions.Builder |
|
| ShapeOcpuOptions |
For a flexible shape, the number of OCPUs available for instances that use this shape.
|
| ShapeOcpuOptions.Builder |
|
| ShapePlatformConfigOptions |
The list of supported platform configuration options for this shape.
|
| ShapePlatformConfigOptions.Builder |
|
| ShapeSecureBootOptions |
Configuration options for Secure Boot.
|
| ShapeSecureBootOptions.Builder |
|
| ShapeSymmetricMultiThreadingEnabledPlatformOptions |
Configuration options for symmetric multithreading (also called simultaneous multithreading or
SMT).
|
| ShapeSymmetricMultiThreadingEnabledPlatformOptions.Builder |
|
| ShapeTrustedPlatformModuleOptions |
Configuration options for the Trusted Platform Module (TPM).
|
| ShapeTrustedPlatformModuleOptions.Builder |
|
| ShapeVirtualInstructionsEnabledPlatformOptions |
Configuration options for the virtualization instructions.
|
| ShapeVirtualInstructionsEnabledPlatformOptions.Builder |
|
| SoftResetActionDetails |
Parameters for the softReset instanceAction.
|
| SoftResetActionDetails.Builder |
|
| Subnet |
A logical subdivision of a VCN.
|
| Subnet.Builder |
|
| SubnetTopology |
Defines the visualization of a subnet in a VCN.
|
| SubnetTopology.Builder |
|
| TcpOptions |
Optional and valid only for TCP.
|
| TcpOptions.Builder |
|
| TerminatePreemptionAction |
Terminates the preemptible instance when it is interrupted for eviction.
|
| TerminatePreemptionAction.Builder |
|
| Topology |
Defines the representation of a virtual network topology.
|
| TopologyAssociatedWithEntityRelationship |
Defines the AssociatedWith relationship between virtual network topology entities.
|
| TopologyAssociatedWithEntityRelationship.Builder |
|
| TopologyAssociatedWithRelationshipDetails |
Defines association details for an associatedWith relationship.
|
| TopologyAssociatedWithRelationshipDetails.Builder |
|
| TopologyContainsEntityRelationship |
Defines the contains relationship between virtual network topology entities.
|
| TopologyContainsEntityRelationship.Builder |
|
| TopologyEntityRelationship |
Defines the relationship between Virtual Network topology entities.
|
| TopologyRoutesToEntityRelationship |
Defines the routesTo relationship between virtual network topology entities.
|
| TopologyRoutesToEntityRelationship.Builder |
|
| TopologyRoutesToRelationshipDetails |
Defines route rule details for a routesTo relationship.
|
| TopologyRoutesToRelationshipDetails.Builder |
|
| TunnelConfig |
Deprecated.
|
| TunnelConfig.Builder |
|
| TunnelCpeDeviceConfig |
The set of CPE configuration answers for the tunnel, which the customer provides in updateTunnelCpeDeviceConfig.
|
| TunnelCpeDeviceConfig.Builder |
|
| TunnelPhaseOneDetails |
IPSec tunnel details specific to ISAKMP phase one.
|
| TunnelPhaseOneDetails.Builder |
|
| TunnelPhaseTwoDetails |
IPsec tunnel detail information specific to phase two.
|
| TunnelPhaseTwoDetails.Builder |
|
| TunnelRouteSummary |
A summary of the routes advertised to and received from the on-premises network.
|
| TunnelRouteSummary.Builder |
|
| TunnelSecurityAssociationSummary |
A summary of the IPSec tunnel security association details.
|
| TunnelSecurityAssociationSummary.Builder |
|
| TunnelStatus |
Deprecated.
|
| TunnelStatus.Builder |
|
| UdpOptions |
Optional and valid only for UDP.
|
| UdpOptions.Builder |
|
| UpdateBootVolumeBackupDetails |
|
| UpdateBootVolumeBackupDetails.Builder |
|
| UpdateBootVolumeDetails |
|
| UpdateBootVolumeDetails.Builder |
|
| UpdateBootVolumeKmsKeyDetails |
|
| UpdateBootVolumeKmsKeyDetails.Builder |
|
| UpdateByoasnDetails |
The information used to update a Byoasn resource.
|
| UpdateByoasnDetails.Builder |
|
| UpdateByoipRangeDetails |
The information used to update a ByoipRange resource.
|
| UpdateByoipRangeDetails.Builder |
|
| UpdateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
| UpdateCaptureFilterDetails |
These details can be included in a request to update a capture filter.
|
| UpdateCaptureFilterDetails.Builder |
|
| UpdateClusterNetworkDetails |
|
| UpdateClusterNetworkDetails.Builder |
|
| UpdateClusterNetworkInstancePoolDetails |
The data to update an instance pool within a cluster network.
|
| UpdateClusterNetworkInstancePoolDetails.Builder |
|
| UpdateComputeCapacityReservationDetails |
Details for updating the compute capacity reservation.
|
| UpdateComputeCapacityReservationDetails.Builder |
|
| UpdateComputeCapacityTopologyDetails |
The details for updating the compute capacity topology.
|
| UpdateComputeCapacityTopologyDetails.Builder |
|
| UpdateComputeClusterDetails |
The data to update a compute cluster.
|
| UpdateComputeClusterDetails.Builder |
|
| UpdateComputeGpuMemoryClusterDetails |
Updates compute GPU memory cluster details.
|
| UpdateComputeGpuMemoryClusterDetails.Builder |
|
| UpdateComputeGpuMemoryFabricDetails |
Updates compute GPU memory fabric details.
|
| UpdateComputeGpuMemoryFabricDetails.Builder |
|
| UpdateComputeHostDetails |
The details for updating the compute host.
|
| UpdateComputeHostDetails.Builder |
|
| UpdateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
| UpdateComputeImageCapabilitySchemaDetails.Builder |
|
| UpdateConsoleHistoryDetails |
|
| UpdateConsoleHistoryDetails.Builder |
|
| UpdateCpeDetails |
|
| UpdateCpeDetails.Builder |
|
| UpdateCrossConnectDetails |
|
| UpdateCrossConnectDetails.Builder |
|
| UpdateCrossConnectGroupDetails |
|
| UpdateCrossConnectGroupDetails.Builder |
|
| UpdateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a user.
|
| UpdateDedicatedCapacitySourceDetails.Builder |
|
| UpdateDedicatedVmHostDetails |
Details for updating the dedicated virtual machine host details.
|
| UpdateDedicatedVmHostDetails.Builder |
|
| UpdateDhcpDetails |
|
| UpdateDhcpDetails.Builder |
|
| UpdatedNetworkSecurityGroupSecurityRules |
|
| UpdatedNetworkSecurityGroupSecurityRules.Builder |
|
| UpdateDrgAttachmentDetails |
|
| UpdateDrgAttachmentDetails.Builder |
|
| UpdateDrgDetails |
|
| UpdateDrgDetails.Builder |
|
| UpdateDrgRouteDistributionDetails |
Details used in a request to update a route distribution.
|
| UpdateDrgRouteDistributionDetails.Builder |
|
| UpdateDrgRouteDistributionStatementDetails |
Route distribution statements to update in the route distribution.
|
| UpdateDrgRouteDistributionStatementDetails.Builder |
|
| UpdateDrgRouteDistributionStatementsDetails |
Details request to update statements in a route distribution.
|
| UpdateDrgRouteDistributionStatementsDetails.Builder |
|
| UpdateDrgRouteRuleDetails |
Details used to update a route rule in the DRG route table.
|
| UpdateDrgRouteRuleDetails.Builder |
|
| UpdateDrgRouteRulesDetails |
Details used to update route rules in a DRG route table.
|
| UpdateDrgRouteRulesDetails.Builder |
|
| UpdateDrgRouteTableDetails |
Details used in a request to update a DRG route table.
|
| UpdateDrgRouteTableDetails.Builder |
|
| UpdateImageDetails |
|
| UpdateImageDetails.Builder |
|
| UpdateInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| UpdateInstanceAgentConfigDetails.Builder |
|
| UpdateInstanceAvailabilityConfigDetails |
Options for defining the availability of a VM instance after a maintenance event that impacts the
underlying hardware, including whether to live migrate supported VM instances when possible
without sending a prior customer notification.
|
| UpdateInstanceAvailabilityConfigDetails.Builder |
|
| UpdateInstanceConfigurationDetails |
|
| UpdateInstanceConfigurationDetails.Builder |
|
| UpdateInstanceConsoleConnectionDetails |
Specifies the properties for updating tags for an instance console connection.
|
| UpdateInstanceConsoleConnectionDetails.Builder |
|
| UpdateInstanceDetails |
|
| UpdateInstanceDetails.Builder |
|
| UpdateInstanceLicensingConfig |
The target license config to be updated on the instance.
|
| UpdateInstanceMaintenanceEventDetails |
Specifies the properties for updating maintenance due date.
|
| UpdateInstanceMaintenanceEventDetails.Builder |
|
| UpdateInstancePlatformConfig |
The platform configuration to be updated for the instance.
|
| UpdateInstancePoolDetails |
The data to update an instance pool.
|
| UpdateInstancePoolDetails.Builder |
|
| UpdateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
| UpdateInstancePoolPlacementConfigurationDetails.Builder |
|
| UpdateInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| UpdateInstanceShapeConfigDetails.Builder |
|
| UpdateInstanceSourceDetails |
The details for updating the instance source.
|
| UpdateInstanceSourceViaBootVolumeDetails |
The details for updating the instance source from an existing boot volume.
|
| UpdateInstanceSourceViaBootVolumeDetails.Builder |
|
| UpdateInstanceSourceViaImageDetails |
The details for updating the instance source from an image.
|
| UpdateInstanceSourceViaImageDetails.Builder |
|
| UpdateInstanceWindowsLicensingConfig |
The default windows licensing config.
|
| UpdateInstanceWindowsLicensingConfig.Builder |
|
| UpdateInternetGatewayDetails |
|
| UpdateInternetGatewayDetails.Builder |
|
| UpdateIPSecConnectionDetails |
|
| UpdateIPSecConnectionDetails.Builder |
|
| UpdateIPSecConnectionTunnelDetails |
|
| UpdateIPSecConnectionTunnelDetails.Builder |
|
| UpdateIPSecConnectionTunnelSharedSecretDetails |
|
| UpdateIPSecConnectionTunnelSharedSecretDetails.Builder |
|
| UpdateIPSecTunnelBgpSessionDetails |
|
| UpdateIPSecTunnelBgpSessionDetails.Builder |
|
| UpdateIPSecTunnelEncryptionDomainDetails |
Request to update a multi-encryption domain policy on the IPSec tunnel.
|
| UpdateIPSecTunnelEncryptionDomainDetails.Builder |
|
| UpdateIpv6Details |
|
| UpdateIpv6Details.Builder |
|
| UpdateLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| UpdateLaunchOptions.Builder |
|
| UpdateLocalPeeringGatewayDetails |
|
| UpdateLocalPeeringGatewayDetails.Builder |
|
| UpdateMacsecKey |
An object defining the OCID of the Secret held in Vault that represent the MACsec key.
|
| UpdateMacsecKey.Builder |
|
| UpdateMacsecProperties |
Properties used to update MACsec settings.
|
| UpdateMacsecProperties.Builder |
|
| UpdateNatGatewayDetails |
|
| UpdateNatGatewayDetails.Builder |
|
| UpdateNetworkSecurityGroupDetails |
|
| UpdateNetworkSecurityGroupDetails.Builder |
|
| UpdateNetworkSecurityGroupSecurityRulesDetails |
|
| UpdateNetworkSecurityGroupSecurityRulesDetails.Builder |
|
| UpdatePrivateIpDetails |
|
| UpdatePrivateIpDetails.Builder |
|
| UpdatePublicIpDetails |
|
| UpdatePublicIpDetails.Builder |
|
| UpdatePublicIpPoolDetails |
The data to update for a public IP pool.
|
| UpdatePublicIpPoolDetails.Builder |
|
| UpdateRemotePeeringConnectionDetails |
|
| UpdateRemotePeeringConnectionDetails.Builder |
|
| UpdateRouteTableDetails |
|
| UpdateRouteTableDetails.Builder |
|
| UpdateSecurityListDetails |
|
| UpdateSecurityListDetails.Builder |
|
| UpdateSecurityRuleDetails |
A rule for allowing inbound (direction= INGRESS) or outbound (direction= EGRESS)
IP packets.
|
| UpdateSecurityRuleDetails.Builder |
|
| UpdateServiceGatewayDetails |
|
| UpdateServiceGatewayDetails.Builder |
|
| UpdateSubnetDetails |
|
| UpdateSubnetDetails.Builder |
|
| UpdateTunnelCpeDeviceConfigDetails |
|
| UpdateTunnelCpeDeviceConfigDetails.Builder |
|
| UpdateVcnDetails |
|
| UpdateVcnDetails.Builder |
|
| UpdateVirtualCircuitDetails |
|
| UpdateVirtualCircuitDetails.Builder |
|
| UpdateVlanDetails |
|
| UpdateVlanDetails.Builder |
|
| UpdateVnicDetails |
|
| UpdateVnicDetails.Builder |
|
| UpdateVolumeAttachmentDetails |
details for updating a volume attachment.
|
| UpdateVolumeAttachmentDetails.Builder |
|
| UpdateVolumeBackupDetails |
|
| UpdateVolumeBackupDetails.Builder |
|
| UpdateVolumeBackupPolicyDetails |
Specifies the properties for updating a user defined backup policy.
|
| UpdateVolumeBackupPolicyDetails.Builder |
|
| UpdateVolumeDetails |
|
| UpdateVolumeDetails.Builder |
|
| UpdateVolumeGroupBackupDetails |
|
| UpdateVolumeGroupBackupDetails.Builder |
|
| UpdateVolumeGroupDetails |
|
| UpdateVolumeGroupDetails.Builder |
|
| UpdateVolumeKmsKeyDetails |
|
| UpdateVolumeKmsKeyDetails.Builder |
|
| UpdateVtapDetails |
These details can be included in a request to update a virtual test access point (VTAP).
|
| UpdateVtapDetails.Builder |
|
| UpgradeStatus |
The upgrade status of a DRG.
|
| UpgradeStatus.Builder |
|
| Vcn |
A virtual cloud network (VCN).
|
| Vcn.Builder |
|
| VcnDnsResolverAssociation |
The information about the VCN and the DNS resolver in the association.
|
| VcnDnsResolverAssociation.Builder |
|
| VcnDrgAttachmentNetworkCreateDetails |
|
| VcnDrgAttachmentNetworkCreateDetails.Builder |
|
| VcnDrgAttachmentNetworkDetails |
Specifies details within the VCN.
|
| VcnDrgAttachmentNetworkDetails.Builder |
|
| VcnDrgAttachmentNetworkUpdateDetails |
Specifies the update details for the VCN attachment.
|
| VcnDrgAttachmentNetworkUpdateDetails.Builder |
|
| VcnTopology |
Defines the representation of a virtual network topology for a VCN.
|
| VcnTopology.Builder |
|
| VirtualCircuit |
For use with Oracle Cloud Infrastructure FastConnect.
|
| VirtualCircuit.Builder |
|
| VirtualCircuitAssociatedTunnelDetails |
Detailed private tunnel info associated with the virtual circuit.
|
| VirtualCircuitAssociatedTunnelDetails.Builder |
|
| VirtualCircuitBandwidthShape |
An individual bandwidth level for virtual circuits.
|
| VirtualCircuitBandwidthShape.Builder |
|
| VirtualCircuitDrgAttachmentNetworkDetails |
Specifies the virtual circuit attached to the DRG.
|
| VirtualCircuitDrgAttachmentNetworkDetails.Builder |
|
| VirtualCircuitPublicPrefix |
A public IP prefix and its details.
|
| VirtualCircuitPublicPrefix.Builder |
|
| VirtualCircuitRedundancyMetadata |
This resource provides redundancy level details for the virtual circuit.
|
| VirtualCircuitRedundancyMetadata.Builder |
|
| Vlan |
A resource to be used only with the Oracle Cloud VMware Solution.
|
| Vlan.Builder |
|
| Vnic |
A virtual network interface card.
|
| Vnic.Builder |
|
| VnicAttachment |
Represents an attachment between a VNIC and an instance.
|
| VnicAttachment.Builder |
|
| Volume |
A detachable block volume device that allows you to dynamically expand the storage capacity of an
instance.
|
| Volume.Builder |
|
| VolumeAttachment |
A base object for all types of attachments between a storage volume and an instance.
|
| VolumeBackup |
A point-in-time copy of a volume that can then be used to create a new block volume or recover a
block volume.
|
| VolumeBackup.Builder |
|
| VolumeBackupPolicy |
A policy for automatically creating volume backups according to a recurring schedule.
|
| VolumeBackupPolicy.Builder |
|
| VolumeBackupPolicyAssignment |
Specifies the volume that the volume backup policy is assigned to.
|
| VolumeBackupPolicyAssignment.Builder |
|
| VolumeBackupSchedule |
Defines the backup frequency and retention period for a volume backup policy.
|
| VolumeBackupSchedule.Builder |
|
| VolumeGroup |
Specifies a volume group which is a collection of volumes.
|
| VolumeGroup.Builder |
|
| VolumeGroupBackup |
A point-in-time copy of a volume group that can then be used to create a new volume group or
restore a volume group.
|
| VolumeGroupBackup.Builder |
|
| VolumeGroupReplica |
An asynchronous replica of a volume group that can then be used to create a new volume group or
recover a volume group.
|
| VolumeGroupReplica.Builder |
|
| VolumeGroupReplicaDetails |
Contains the details for the volume group replica.
|
| VolumeGroupReplicaDetails.Builder |
|
| VolumeGroupReplicaInfo |
Information about the volume group replica in the destination availability domain.
|
| VolumeGroupReplicaInfo.Builder |
|
| VolumeGroupSourceDetails |
Specifies the source for a volume group.
|
| VolumeGroupSourceFromVolumeGroupBackupDetails |
Specifies the volume group backup to restore from.
|
| VolumeGroupSourceFromVolumeGroupBackupDetails.Builder |
|
| VolumeGroupSourceFromVolumeGroupDetails |
Specifies the volume group to clone from.
|
| VolumeGroupSourceFromVolumeGroupDetails.Builder |
|
| VolumeGroupSourceFromVolumeGroupReplicaDetails |
Specifies the source volume replica which the volume group will be created from.
|
| VolumeGroupSourceFromVolumeGroupReplicaDetails.Builder |
|
| VolumeGroupSourceFromVolumesDetails |
Specifies the volumes in a volume group.
|
| VolumeGroupSourceFromVolumesDetails.Builder |
|
| VolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
| VolumeKmsKey.Builder |
|
| VolumeSourceDetails |
Specifies the volume source details for a new Block volume.
|
| VolumeSourceFromBlockVolumeReplicaDetails |
Specifies the source block volume replica which the block volume will be created from.
|
| VolumeSourceFromBlockVolumeReplicaDetails.Builder |
|
| VolumeSourceFromVolumeBackupDeltaDetails |
Specifies the volume backups (first & second) and block size in bytes.
|
| VolumeSourceFromVolumeBackupDeltaDetails.Builder |
|
| VolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
| VolumeSourceFromVolumeBackupDetails.Builder |
|
| VolumeSourceFromVolumeDetails |
Specifies the source volume.
|
| VolumeSourceFromVolumeDetails.Builder |
|
| Vtap |
A virtual test access point (VTAP) provides a way to mirror all traffic from a designated source
to a selected target in order to facilitate troubleshooting, security analysis, and data
monitoring.
|
| Vtap.Builder |
|
| VtapCaptureFilterRuleDetails |
This resource contains the rules governing what traffic a VTAP mirrors.
|
| VtapCaptureFilterRuleDetails.Builder |
|