``create`` ========== .. contents:: :local: :depth: 1 Description ------------ Creates an Operator Control Assignment resource. In effect, this brings the target resource under the governance of the Operator Control for specified time duration. Usage ----- .. code-block:: none oci opctl operator-control-assignment create [OPTIONS] Required Parameters -------------------- .. option:: --compartment-id, -c [text] The OCID of the compartment that contains the operator control assignment. .. option:: --is-enforced-always [boolean] If set, then the target resource is always governed by the operator control. .. option:: --operator-control-id [text] The OCID of the operator control that is being assigned to a target resource. .. option:: --resource-compartment-id [text] The OCID of the compartment that contains the target resource. .. option:: --resource-id [text] The OCID of the target resource being brought under the governance of the operator control. .. option:: --resource-name [text] Name of the target resource. .. option:: --resource-type [text] Type of the target resource. Accepted values are: .. code-block:: py AUTONOMOUSVMCLUSTER, CCCINFRASTRUCTURE, CLOUDAUTONOMOUSVMCLUSTER, EXACC, EXADATAINFRASTRUCTURE Optional Parameters -------------------- .. option:: --comment [text] Comment about the assignment of the operator control to this target resource. .. option:: --defined-tags [complex type] Defined tags for this resource. Each key is predefined and scoped to a namespace. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax. The :option:`--generate-param-json-input` option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax. .. option:: --freeform-tags [complex type] Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax. The :option:`--generate-param-json-input` option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax. .. option:: --from-json [text] Provide input to this command as a JSON document from a file using the file://path-to/file syntax. The :option:`--generate-full-command-json-input` option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id --> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array. Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used. For examples on usage of this option, please see our "using CLI with advanced JSON options" link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions .. option:: --is-auto-approve-during-maintenance [boolean] The boolean if true would autoApprove during maintenance. .. option:: --is-hypervisor-log-forwarded [boolean] If set, then the hypervisor audit logs will be forwarded to the relevant remote syslog server .. option:: --is-log-forwarded [boolean] If set, then the audit logs will be forwarded to the relevant remote logging server .. option:: --max-wait-seconds [integer] The maximum time to wait for the resource to reach the lifecycle state defined by ``--wait-for-state``. Defaults to 1200 seconds. .. option:: --remote-syslog-server-address [text] The address of the remote syslog server where the audit logs will be forwarded to. Address in host or IP format. .. option:: --remote-syslog-server-ca-cert [text] The CA certificate of the remote syslog server. Identity of the remote syslog server will be asserted based on this certificate. .. option:: --remote-syslog-server-port [integer] The listening port of the remote syslog server. The port range is 0 - 65535. Only TCP supported. .. option:: --time-assignment-from [datetime] The time at which the target resource will be brought under the governance of the operator control in `RFC 3339 `__ timestamp format. Example: '2020-05-22T21:10:29.600Z' The following datetime formats are supported: UTC with microseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD Example: 2017-09-15T20:30:00.123456Z UTC with milliseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.sssTZD Example: 2017-09-15T20:30:00.123Z UTC without milliseconds ************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T20:30:00Z UTC with minute precision ************************** .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T20:30Z Timezone with microseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800 Timezone with milliseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800 Timezone without milliseconds ******************************* .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800 Timezone with minute precision ******************************* .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800 Short date and time ******************** The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes) .. code:: Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm" Example: '2017-09-15 17:25' Date Only ********** This date will be taken as midnight UTC of that day .. code:: Format: YYYY-MM-DD Example: 2017-09-15 Epoch seconds ************** .. code:: Example: 1412195400 .. option:: --time-assignment-to [datetime] The time at which the target resource will leave the governance of the operator control in `RFC 3339 `__timestamp format.Example: '2020-05-22T21:10:29.600Z' The following datetime formats are supported: UTC with microseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD Example: 2017-09-15T20:30:00.123456Z UTC with milliseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.sssTZD Example: 2017-09-15T20:30:00.123Z UTC without milliseconds ************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T20:30:00Z UTC with minute precision ************************** .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T20:30Z Timezone with microseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800 Timezone with milliseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800 Timezone without milliseconds ******************************* .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800 Timezone with minute precision ******************************* .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800 Short date and time ******************** The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes) .. code:: Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm" Example: '2017-09-15 17:25' Date Only ********** This date will be taken as midnight UTC of that day .. code:: Format: YYYY-MM-DD Example: 2017-09-15 Epoch seconds ************** .. code:: Example: 1412195400 .. option:: --wait-for-state [text] This operation creates, modifies or deletes a resource that has a defined lifecycle state. Specify this option to perform the action and then wait until the resource reaches a given lifecycle state. Multiple states can be specified, returning on the first state. For example, ``--wait-for-state`` SUCCEEDED ``--wait-for-state`` FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned. Accepted values are: .. code-block:: py APPLIED, APPLYFAILED, CREATED, DELETED, DELETING, DELETIONFAILED, UPDATEFAILED, UPDATING .. option:: --wait-interval-seconds [integer] Check every ``--wait-interval-seconds`` to see whether the resource has reached the lifecycle state defined by ``--wait-for-state``. Defaults to 30 seconds. Global Parameters ------------------ Use ``oci --help`` for help on global parameters. :option:`--auth-purpose`, :option:`--auth`, :option:`--cert-bundle`, :option:`--cli-auto-prompt`, :option:`--cli-rc-file`, :option:`--config-file`, :option:`--connection-timeout`, :option:`--debug`, :option:`--defaults-file`, :option:`--endpoint`, :option:`--generate-full-command-json-input`, :option:`--generate-param-json-input`, :option:`--help`, :option:`--latest-version`, :option:`--max-retries`, :option:`--no-retry`, :option:`--opc-client-request-id`, :option:`--opc-request-id`, :option:`--output`, :option:`--profile`, :option:`--proxy`, :option:`--query`, :option:`--raw-output`, :option:`--read-timeout`, :option:`--realm-specific-endpoint`, :option:`--region`, :option:`--release-info`, :option:`--request-id`, :option:`--version`, :option:`-?`, :option:`-d`, :option:`-h`, :option:`-i`, :option:`-v` Example using required parameter ------------------ Copy and paste the following example into a JSON file, replacing the example parameters with your own. .. code-block:: none :class: copy-code-block oci opctl operator-control create --generate-param-json-input approver-groups-list > approver-groups-list.json Copy the following CLI commands into a file named example.sh. Run the command by typing "bash example.sh" and replacing the example parameters with your own. Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up `the OCI configuration `__ and `appropriate security policies `__ before trying the examples. .. code-block:: none :class: copy-code-block export compartment_id= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control/create.html#cmdoption-compartment-id export is_fully_pre_approved= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control/create.html#cmdoption-is-fully-pre-approved export operator_control_name= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control/create.html#cmdoption-operator-control-name export resource_type= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control/create.html#cmdoption-resource-type export is_enforced_always= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control-assignment/create.html#cmdoption-is-enforced-always export resource_compartment_id= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control-assignment/create.html#cmdoption-resource-compartment-id export resource_id= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control-assignment/create.html#cmdoption-resource-id export resource_name= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/opctl/operator-control-assignment/create.html#cmdoption-resource-name operator_control_id=$(oci opctl operator-control create --approver-groups-list file://approver-groups-list.json --compartment-id $compartment_id --is-fully-pre-approved $is_fully_pre_approved --operator-control-name $operator_control_name --resource-type $resource_type --query data.id --raw-output) oci opctl operator-control-assignment create --compartment-id $compartment_id --is-enforced-always $is_enforced_always --operator-control-id $operator_control_id --resource-compartment-id $resource_compartment_id --resource-id $resource_id --resource-name $resource_name --resource-type $resource_type