``create`` ========== .. contents:: :local: :depth: 1 Description ------------ Creates a new Protected Database. Usage ----- .. code-block:: none oci recovery protected-database create [OPTIONS] Required Parameters -------------------- .. option:: --compartment-id, -c [text] The OCID of the compartment that contains the protected database. .. option:: --db-unique-name [text] The dbUniqueName of the protected database in Recovery Service. You cannot change the unique name. .. option:: --display-name [text] The protected database name. You can change the displayName. Avoid entering confidential information. .. option:: --password [text] Password credential which can be used to connect to Protected Database. It must contain at least 2 uppercase, 2 lowercase, 2 numeric and 2 special characters. The special characters must be underscore (_), number sign (#) or hyphen (-). The password must not contain the username "admin", regardless of casing. .. option:: --protection-policy-id [text] The OCID of the protection policy associated with the protected database. .. option:: --recovery-service-subnets [complex type] List of recovery service subnet resources associated with the protected database. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax. The :option:`--generate-param-json-input` option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax. Optional Parameters -------------------- .. option:: --change-rate [text] The percentage of data changes that exist in the database between successive incremental backups. .. option:: --compression-ratio [text] The compression ratio of the protected database. The compression ratio represents the ratio of compressed block size to expanded block size. .. option:: --database-id [text] The OCID of the protected database. .. option:: --database-size [text] The size of the protected database. XS - Less than 5GB, S - 5GB to 50GB, M - 50GB to 500GB, L - 500GB to 1TB, XL - 1TB to 5TB, XXL - Greater than 5TB. Accepted values are: .. code-block:: py AUTO, L, M, S, XL, XS, XXL .. option:: --database-size-in-gbs [integer] The size of the database, in gigabytes. .. option:: --defined-tags [complex type] Defined tags for this resource. Each key is predefined and scoped to a namespace. Example: `{"foo-namespace": {"bar-key": "value"}}`. For more information, see `Resource Tags `__ This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax. The :option:`--generate-param-json-input` option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax. .. option:: --freeform-tags [complex type] Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. Example: `{"bar-key": "value"}` This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax. The :option:`--generate-param-json-input` option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax. .. option:: --from-json [text] Provide input to this command as a JSON document from a file using the file://path-to/file syntax. The :option:`--generate-full-command-json-input` option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id --> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array. Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used. For examples on usage of this option, please see our "using CLI with advanced JSON options" link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions .. option:: --is-redo-logs-shipped [boolean] The value TRUE indicates that the protected database is configured to use Real-time data protection, and redo-data is sent from the protected database to Recovery Service. Real-time data protection substantially reduces the window of potential data loss that exists between successive archived redo log backups. .. option:: --max-wait-seconds [integer] The maximum time to wait for the work request to reach the state defined by ``--wait-for-state``. Defaults to 1200 seconds. .. option:: --opc-dry-run [boolean] Indicates if the request is to test the preparedness for creating a protected database, without actually creating a protected database. If you set the `opcDryRun` option as `true`, then Recovery Service only performs a test run to check for any missing prerequisites or configurations required to create a protected database, and then returns error messages to warn you about any missing requirements. If an error occurs, you can review, correct, and repeat the dry run until the `createProtectedDatabase` request does not return any errors. These are the common issues that you can identify by performing a dry run of the `createProtectedDatabase` request: * The Recovery Service subnet has insufficient free IP addresses to support the required number of private endpoints. See, `troubleshooting `__ information * Recovery Service does not have permissions to manage the network resources in a chosen compartment * Recovery Service is out of capacity. See, `Service Limits `__ for more information * Recovery Service resources exceed quota limits * A protected database, having the same database ID, already exists * The specified protection policy does not exist, or it is not in an Active state * The specified Recovery Service subnet does not exist, or it is not in an Active state See, `Prerequisites for Using Recovery Service `__ for more information. .. option:: --wait-for-state [text] This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, ``--wait-for-state`` SUCCEEDED ``--wait-for-state`` FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned. Accepted values are: .. code-block:: py ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED, WAITING .. option:: --wait-interval-seconds [integer] Check every ``--wait-interval-seconds`` to see whether the work request has reached the state defined by ``--wait-for-state``. Defaults to 30 seconds. Global Parameters ------------------ Use ``oci --help`` for help on global parameters. :option:`--auth-purpose`, :option:`--auth`, :option:`--cert-bundle`, :option:`--cli-auto-prompt`, :option:`--cli-rc-file`, :option:`--config-file`, :option:`--connection-timeout`, :option:`--debug`, :option:`--defaults-file`, :option:`--endpoint`, :option:`--generate-full-command-json-input`, :option:`--generate-param-json-input`, :option:`--help`, :option:`--latest-version`, :option:`--max-retries`, :option:`--no-retry`, :option:`--opc-client-request-id`, :option:`--opc-request-id`, :option:`--output`, :option:`--profile`, :option:`--proxy`, :option:`--query`, :option:`--raw-output`, :option:`--read-timeout`, :option:`--realm-specific-endpoint`, :option:`--region`, :option:`--release-info`, :option:`--request-id`, :option:`--version`, :option:`-?`, :option:`-d`, :option:`-h`, :option:`-i`, :option:`-v` Example using required parameter ------------------ Copy and paste the following example into a JSON file, replacing the example parameters with your own. .. code-block:: none :class: copy-code-block oci recovery protected-database create --generate-param-json-input recovery-service-subnets > recovery-service-subnets.json Copy the following CLI commands into a file named example.sh. Run the command by typing "bash example.sh" and replacing the example parameters with your own. Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up `the OCI configuration `__ and `appropriate security policies `__ before trying the examples. .. code-block:: none :class: copy-code-block export backup_retention_period_in_days= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/recovery/protection-policy/create.html#cmdoption-backup-retention-period-in-days export compartment_id= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/recovery/protection-policy/create.html#cmdoption-compartment-id export display_name= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/recovery/protection-policy/create.html#cmdoption-display-name export db_unique_name= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/recovery/protected-database/create.html#cmdoption-db-unique-name export password= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/recovery/protected-database/create.html#cmdoption-password protection_policy_id=$(oci recovery protection-policy create --backup-retention-period-in-days $backup_retention_period_in_days --compartment-id $compartment_id --display-name $display_name --query data.id --raw-output) oci recovery protected-database create --compartment-id $compartment_id --db-unique-name $db_unique_name --display-name $display_name --password $password --protection-policy-id $protection_policy_id --recovery-service-subnets file://recovery-service-subnets.json