Class: OCI::Dts::TransferJobClient

Inherits:
Object
  • Object
show all
Defined in:
lib/oci/dts/transfer_job_client.rb

Overview

Data Transfer Service API Specification

Instance Attribute Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(config: nil, region: nil, endpoint: nil, signer: nil, proxy_settings: nil, retry_config: nil) ⇒ TransferJobClient

Creates a new TransferJobClient. Notes: If a config is not specified, then the global OCI.config will be used.

This client is not thread-safe

Either a region or an endpoint must be specified. If an endpoint is specified, it will be used instead of the region. A region may be specified in the config or via or the region parameter. If specified in both, then the region parameter will be used.

Parameters:

  • config (Config) (defaults to: nil) —

    A Config object.

  • region (String) (defaults to: nil) —

    A region used to determine the service endpoint. This will usually correspond to a value in Regions::REGION_ENUM, but may be an arbitrary string.

  • endpoint (String) (defaults to: nil) —

    The fully qualified endpoint URL

  • signer (OCI::BaseSigner) (defaults to: nil) —

    A signer implementation which can be used by this client. If this is not provided then a signer will be constructed via the provided config. One use case of this parameter is instance principals authentication, so that the instance principals signer can be provided to the client

  • proxy_settings (OCI::ApiClientProxySettings) (defaults to: nil) —

    If your environment requires you to use a proxy server for outgoing HTTP requests the details for the proxy can be provided in this parameter

  • retry_config (OCI::Retry::RetryConfig) (defaults to: nil) —

    The retry configuration for this service client. This represents the default retry configuration to apply across all operations. This can be overridden on a per-operation basis. The default retry configuration value is nil, which means that an operation will not perform any retries



55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
 
# File 'lib/oci/dts/transfer_job_client.rb', line 55

def initialize(config: nil, region: nil, endpoint: nil, signer: nil, proxy_settings: nil, retry_config: nil)
  # If the signer is an InstancePrincipalsSecurityTokenSigner or SecurityTokenSigner and no config was supplied (they are self-sufficient signers)
  # then create a dummy config to pass to the ApiClient constructor. If customers wish to create a client which uses instance principals
  # and has config (either populated programmatically or loaded from a file), they must construct that config themselves and then
  # pass it to this constructor.
  #
  # If there is no signer (or the signer is not an instance principals signer) and no config was supplied, this is not valid
  # so try and load the config from the default file.
  config = OCI::Config.validate_and_build_config_with_signer(config, signer)

  signer = OCI::Signer.config_file_auth_builder(config) if signer.nil?

  @api_client = OCI::ApiClient.new(config, signer, proxy_settings: proxy_settings)
  @retry_config = retry_config

  if endpoint
    @endpoint = endpoint + '/20171001'
  else
    region ||= config.region
    region ||= signer.region if signer.respond_to?(:region)
    self.region = region
  end
  logger.info "TransferJobClient endpoint set to '#{@endpoint}'." if logger
end

Instance Attribute Details

#api_client ⇒ OCI::ApiClient (readonly)

Client used to make HTTP requests.

Returns:



15
16
17
 
# File 'lib/oci/dts/transfer_job_client.rb', line 15

def api_client
  @api_client
end

#endpoint ⇒ String (readonly)

Fully qualified endpoint URL

Returns:

  • (String) 


19
20
21
 
# File 'lib/oci/dts/transfer_job_client.rb', line 19

def endpoint
  @endpoint
end

#region ⇒ String

The region, which will usually correspond to a value in Regions::REGION_ENUM.

Returns:

  • (String) 


29
30
31
 
# File 'lib/oci/dts/transfer_job_client.rb', line 29

def region
  @region
end

#retry_config ⇒ OCI::Retry::RetryConfig (readonly)

The default retry configuration to apply to all operations in this service client. This can be overridden on a per-operation basis. The default retry configuration value is nil, which means that an operation will not perform any retries

Returns:



25
26
27
 
# File 'lib/oci/dts/transfer_job_client.rb', line 25

def retry_config
  @retry_config
end

Instance Method Details

#change_transfer_job_compartment(transfer_job_id, change_transfer_job_compartment_details, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use change_transfer_job_compartment API.

Moves a TransferJob into a different compartment.

Parameters:

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :if_match (String) —

    The entity tag to match. Optional, if set, the update will be successful only if the object's tag matches the tag specified in the request.

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

  • :opc_retry_token (String) —

    A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations (e.g., if a resource has been deleted and purged from the system, then a retry of the original creation request may be rejected).

Returns:

  • (Response) —

    A Response object with data of type nil



123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
 
# File 'lib/oci/dts/transfer_job_client.rb', line 123

def change_transfer_job_compartment(transfer_job_id, change_transfer_job_compartment_details, opts = {})
  logger.debug 'Calling operation TransferJobClient#change_transfer_job_compartment.' if logger

  raise "Missing the required parameter 'transfer_job_id' when calling change_transfer_job_compartment." if transfer_job_id.nil?
  raise "Missing the required parameter 'change_transfer_job_compartment_details' when calling change_transfer_job_compartment." if change_transfer_job_compartment_details.nil?
  raise "Parameter value for 'transfer_job_id' must not be blank" if OCI::Internal::Util.blank_string?(transfer_job_id)

  path = '/transferJobs/{transferJobId}/actions/changeCompartment'.sub('{transferJobId}', transfer_job_id.to_s)
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'if-match'] = opts[:if_match] if opts[:if_match]
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  header_params[:'opc-retry-token'] = opts[:opc_retry_token] if opts[:opc_retry_token]
  # rubocop:enable Style/NegatedIf
  header_params[:'opc-retry-token'] ||= OCI::Retry.generate_opc_retry_token

  post_body = @api_client.object_to_http_body(change_transfer_job_compartment_details)

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#change_transfer_job_compartment') do
    @api_client.call_api(
      :POST,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#create_transfer_job(create_transfer_job_details, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use create_transfer_job API.

Create a new Transfer Job that corresponds with customer's logical dataset e.g. a DB or a filesystem.

Parameters:

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

  • :opc_retry_token (String) —

    A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations (e.g., if a resource has been deleted and purged from the system, then a retry of the original creation request may be rejected).

Returns:



188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
 
# File 'lib/oci/dts/transfer_job_client.rb', line 188

def create_transfer_job(create_transfer_job_details, opts = {})
  logger.debug 'Calling operation TransferJobClient#create_transfer_job.' if logger

  raise "Missing the required parameter 'create_transfer_job_details' when calling create_transfer_job." if create_transfer_job_details.nil?

  path = '/transferJobs'
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  header_params[:'opc-retry-token'] = opts[:opc_retry_token] if opts[:opc_retry_token]
  # rubocop:enable Style/NegatedIf
  header_params[:'opc-retry-token'] ||= OCI::Retry.generate_opc_retry_token

  post_body = @api_client.object_to_http_body(create_transfer_job_details)

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#create_transfer_job') do
    @api_client.call_api(
      :POST,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'OCI::Dts::Models::TransferJob'
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#delete_transfer_job(id, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use delete_transfer_job API.

deletes a transfer job

Parameters:

  • id (String) —

    ID of the Transfer Job

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

  • :opc_retry_token (String) —

    A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations (e.g., if a resource has been deleted and purged from the system, then a retry of the original creation request may be rejected).

Returns:

  • (Response) —

    A Response object with data of type nil



251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
 
# File 'lib/oci/dts/transfer_job_client.rb', line 251

def delete_transfer_job(id, opts = {})
  logger.debug 'Calling operation TransferJobClient#delete_transfer_job.' if logger

  raise "Missing the required parameter 'id' when calling delete_transfer_job." if id.nil?
  raise "Parameter value for 'id' must not be blank" if OCI::Internal::Util.blank_string?(id)

  path = '/transferJobs/{id}'.sub('{id}', id.to_s)
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  header_params[:'opc-retry-token'] = opts[:opc_retry_token] if opts[:opc_retry_token]
  # rubocop:enable Style/NegatedIf
  header_params[:'opc-retry-token'] ||= OCI::Retry.generate_opc_retry_token

  post_body = nil

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#delete_transfer_job') do
    @api_client.call_api(
      :DELETE,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#get_transfer_job(id, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use get_transfer_job API.

Describes a transfer job in detail

Parameters:

  • id (String) —

    OCID of the Transfer Job

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

Returns:



308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
 
# File 'lib/oci/dts/transfer_job_client.rb', line 308

def get_transfer_job(id, opts = {})
  logger.debug 'Calling operation TransferJobClient#get_transfer_job.' if logger

  raise "Missing the required parameter 'id' when calling get_transfer_job." if id.nil?
  raise "Parameter value for 'id' must not be blank" if OCI::Internal::Util.blank_string?(id)

  path = '/transferJobs/{id}'.sub('{id}', id.to_s)
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  # rubocop:enable Style/NegatedIf

  post_body = nil

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#get_transfer_job') do
    @api_client.call_api(
      :GET,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'OCI::Dts::Models::TransferJob'
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#list_transfer_jobs(compartment_id, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use list_transfer_jobs API.

Lists Transfer Jobs in a given compartment

Parameters:

  • compartment_id (String) —

    compartment id

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :lifecycle_state (String) —

    filtering by lifecycleState Allowed values are: INITIATED, PREPARING, ACTIVE, DELETED, CLOSED

  • :display_name (String) —

    filtering by displayName

  • :limit (Integer) —

    For list pagination. The maximum number of results per page, or items to return in a paginated "List" call. For important details about how pagination works, see List Pagination.

    Example: 50 (default to 100)

  • :page (String) —

    For list pagination. The value of the opc-next-page response header from the previous "List" call. For important details about how pagination works, see List Pagination.

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

Returns:



377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
 
# File 'lib/oci/dts/transfer_job_client.rb', line 377

def list_transfer_jobs(compartment_id, opts = {})
  logger.debug 'Calling operation TransferJobClient#list_transfer_jobs.' if logger

  raise "Missing the required parameter 'compartment_id' when calling list_transfer_jobs." if compartment_id.nil?

  if opts[:lifecycle_state] && !%w[INITIATED PREPARING ACTIVE DELETED CLOSED].include?(opts[:lifecycle_state])
    raise 'Invalid value for "lifecycle_state", must be one of INITIATED, PREPARING, ACTIVE, DELETED, CLOSED.'
  end

  path = '/transferJobs'
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}
  query_params[:compartmentId] = compartment_id
  query_params[:lifecycleState] = opts[:lifecycle_state] if opts[:lifecycle_state]
  query_params[:displayName] = opts[:display_name] if opts[:display_name]
  query_params[:limit] = opts[:limit] if opts[:limit]
  query_params[:page] = opts[:page] if opts[:page]

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  # rubocop:enable Style/NegatedIf

  post_body = nil

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#list_transfer_jobs') do
    @api_client.call_api(
      :GET,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'Array<OCI::Dts::Models::TransferJobSummary>'
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#logger ⇒ Logger

Returns The logger for this client. May be nil.

Returns:

  • (Logger) —

    The logger for this client. May be nil.



94
95
96
 
# File 'lib/oci/dts/transfer_job_client.rb', line 94

def logger
  @api_client.config.logger
end

#update_transfer_job(id, update_transfer_job_details, opts = {}) ⇒ Response

Note:

Click here to see an example of how to use update_transfer_job API.

Updates a Transfer Job that corresponds with customer's logical dataset e.g. a DB or a filesystem.

Parameters:

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :if_match (String) —

    The entity tag to match. Optional, if set, the update will be successful only if the object's tag matches the tag specified in the request.

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

Returns:



445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
 
# File 'lib/oci/dts/transfer_job_client.rb', line 445

def update_transfer_job(id, update_transfer_job_details, opts = {})
  logger.debug 'Calling operation TransferJobClient#update_transfer_job.' if logger

  raise "Missing the required parameter 'id' when calling update_transfer_job." if id.nil?
  raise "Missing the required parameter 'update_transfer_job_details' when calling update_transfer_job." if update_transfer_job_details.nil?
  raise "Parameter value for 'id' must not be blank" if OCI::Internal::Util.blank_string?(id)

  path = '/transferJobs/{id}'.sub('{id}', id.to_s)
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'if-match'] = opts[:if_match] if opts[:if_match]
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  # rubocop:enable Style/NegatedIf

  post_body = @api_client.object_to_http_body(update_transfer_job_details)

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'TransferJobClient#update_transfer_job') do
    @api_client.call_api(
      :PUT,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'OCI::Dts::Models::TransferJob'
    )
  end
  # rubocop:enable Metrics/BlockLength
end