| Package | Description |
|---|---|
| com.oracle.bmc.vnmonitoring | |
| com.oracle.bmc.vnmonitoring.model | |
| com.oracle.bmc.vnmonitoring.requests | |
| com.oracle.bmc.vnmonitoring.responses |
| Class and Description |
|---|
| PathAnalyzerTest.LifecycleState
The current state of the
PathAnalyzerTest resource. |
| PathAnalyzerTestSummary
Defines the summary of a
PathAnalyzerTest resource. |
| WorkRequestError
An error encountered while executing an operation that is tracked by a work request.
|
| WorkRequestLogEntry
A log message from executing an operation that is tracked by a work request.
|
| WorkRequestResult
Ephemeral data resulting from an asynchronous operation.
|
| WorkRequestSummary
A summary of the status of a work request.
|
| Class and Description |
|---|
| AccessDeniedTrafficNode
Defines the configuration of a traffic node to which the user is denied access.
|
| AccessDeniedTrafficNode.Builder |
| ActionType
Possible types of actions.
|
| AddDrgRouteDistributionStatementDetails
Details used to add a route distribution statement.
|
| AddDrgRouteDistributionStatementDetails.Action
Accept: import/export the route “as is”
|
| AddDrgRouteDistributionStatementDetails.Builder |
| AddDrgRouteDistributionStatementsDetails
Details request to add statements to a route distribution.
|
| AddDrgRouteDistributionStatementsDetails.Builder |
| AddDrgRouteRuleDetails
Details needed when adding a DRG route rule.
|
| AddDrgRouteRuleDetails.Builder |
| AddDrgRouteRuleDetails.DestinationType
Type of destination for the rule.
|
| AddDrgRouteRulesDetails
Details used in a request to add static routes to a DRG route table.
|
| AddDrgRouteRulesDetails.Builder |
| AddedNetworkSecurityGroupSecurityRules
Note: Objects should always be created or deserialized using the AddedNetworkSecurityGroupSecurityRules.Builder. |
| AddedNetworkSecurityGroupSecurityRules.Builder |
| AddNetworkSecurityGroupSecurityRulesDetails
Note: Objects should always be created or deserialized using the AddNetworkSecurityGroupSecurityRulesDetails.Builder. |
| AddNetworkSecurityGroupSecurityRulesDetails.Builder |
| AddPublicIpPoolCapacityDetails
The information used to add capacity to an IP pool.
|
| AddPublicIpPoolCapacityDetails.Builder |
| AddSecurityRuleDetails
A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
|
| AddSecurityRuleDetails.Builder |
| AddSecurityRuleDetails.DestinationType
Type of destination for the rule.
|
| AddSecurityRuleDetails.Direction
Direction of the security rule.
|
| AddSecurityRuleDetails.SourceType
Type of source for the rule.
|
| AddSubnetIpv6CidrDetails
Details used when adding an IPv6 CIDR block to a subnet.
|
| AddSubnetIpv6CidrDetails.Builder |
| AddVcnCidrDetails
Details used to add a CIDR block to a VCN.
|
| AddVcnCidrDetails.Builder |
| AddVcnIpv6CidrDetails
Details used when adding a ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or a
BYOIPv6 prefix.
|
| AddVcnIpv6CidrDetails.Builder |
| AdhocGetPathAnalysisDetails
Defines the configuration for getting an ad-hoc path analysis.
|
| AdhocGetPathAnalysisDetails.Builder |
| AllowedIkeIPSecParameters
Lists the current allowed and default IPSec tunnel parameters.
|
| AllowedIkeIPSecParameters.Builder |
| AllowedPhaseOneParameters
Allowed phase one parameters.
|
| AllowedPhaseOneParameters.Builder |
| AllowedPhaseTwoParameters
Allowed phase two parameters.
|
| AllowedPhaseTwoParameters.Builder |
| AllowedSecurityAction
Defines the security action taken on allowed traffic.
|
| AllowedSecurityAction.Builder |
| AllowedSecurityActionDetails
Defines details for the security action taken on allowed traffic.
|
| AllowedSecurityActionDetails.Builder |
| AllowedSecurityConfiguration
Defines the allowed security configuration for the traffic.
|
| AllowedSecurityConfiguration.Type
The type of the allowed security configuration.
|
| BgpSessionInfo
Information for establishing a BGP session for the IPSec tunnel.
|
| BgpSessionInfo.BgpIpv6State
The state of the BGP IPv6 session.
|
| BgpSessionInfo.BgpState
The state of the BGP session.
|
| BgpSessionInfo.Builder |
| BulkAddVirtualCircuitPublicPrefixesDetails
Note: Objects should always be created or deserialized using the BulkAddVirtualCircuitPublicPrefixesDetails.Builder. |
| BulkAddVirtualCircuitPublicPrefixesDetails.Builder |
| BulkDeleteVirtualCircuitPublicPrefixesDetails
Note: Objects should always be created or deserialized using the BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder. |
| BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder |
| ByoipAllocatedRangeCollection
Results of a
ListByoipAllocatedRanges operation. |
| ByoipAllocatedRangeCollection.Builder |
| ByoipAllocatedRangeSummary
A summary of CIDR block subranges that are currently allocated to an IP pool.
|
| ByoipAllocatedRangeSummary.Builder |
| ByoipRange
Oracle offers the ability to Bring Your Own IP (BYOIP), importing public IP addresses or IPv6
addresses that you currently own to Oracle Cloud Infrastructure.
|
| ByoipRange.Builder |
| ByoipRange.LifecycleDetails
The
ByoipRange resource’s current status. |
| ByoipRange.LifecycleState
The
ByoipRange resource’s current state. |
| ByoipRangeCollection
The results returned by a
ListByoipRange operation. |
| ByoipRangeCollection.Builder |
| ByoipRangeSummary
Information about a
ByoipRange resource. |
| ByoipRangeSummary.Builder |
| ByoipRangeVcnIpv6AllocationSummary
A summary of IPv6 CIDR block subranges currently allocated to a VCN.
|
| ByoipRangeVcnIpv6AllocationSummary.Builder |
| Byoipv6CidrDetails
The list of one or more BYOIPv6 CIDR blocks for the VCN that meets the following criteria: - The
CIDR must from a BYOIPv6 range.
|
| Byoipv6CidrDetails.Builder |
| CaptureFilter
A capture filter contains a set of
captureFilterRuleDetails governing
what traffic a Vtap mirrors. |
| CaptureFilter.Builder |
| CaptureFilter.FilterType
Indicates which service will use this capture filter
|
| CaptureFilter.LifecycleState
The capture filter’s current administrative state.
|
| ChangeByoipRangeCompartmentDetails
The configuration details for the move operation.
|
| ChangeByoipRangeCompartmentDetails.Builder |
| ChangeCaptureFilterCompartmentDetails
These configuration details are used in the move operation when changing the compartment
containing a virtual test access point (VTAP) capture filter.
|
| ChangeCaptureFilterCompartmentDetails.Builder |
| ChangeCpeCompartmentDetails
The configuration details for the move operation.
|
| ChangeCpeCompartmentDetails.Builder |
| ChangeCrossConnectCompartmentDetails
The configuration details for the move operation.
|
| ChangeCrossConnectCompartmentDetails.Builder |
| ChangeCrossConnectGroupCompartmentDetails
The configuration details for the move operation.
|
| ChangeCrossConnectGroupCompartmentDetails.Builder |
| ChangeDhcpOptionsCompartmentDetails
The configuration details for the move operation.
|
| ChangeDhcpOptionsCompartmentDetails.Builder |
| ChangeDrgCompartmentDetails
The configuration details for the move operation.
|
| ChangeDrgCompartmentDetails.Builder |
| ChangeInternetGatewayCompartmentDetails
The configuration details for the move operation.
|
| ChangeInternetGatewayCompartmentDetails.Builder |
| ChangeIPSecConnectionCompartmentDetails
The configuration details for the move operation.
|
| ChangeIPSecConnectionCompartmentDetails.Builder |
| ChangeLocalPeeringGatewayCompartmentDetails
The configuration details for the move operation.
|
| ChangeLocalPeeringGatewayCompartmentDetails.Builder |
| ChangeNatGatewayCompartmentDetails
The configuration details for the move operation.
|
| ChangeNatGatewayCompartmentDetails.Builder |
| ChangeNetworkSecurityGroupCompartmentDetails
Note: Objects should always be created or deserialized using the ChangeNetworkSecurityGroupCompartmentDetails.Builder. |
| ChangeNetworkSecurityGroupCompartmentDetails.Builder |
| ChangePathAnalyzerTestCompartmentDetails
Details of the new
compartmentId for the PathAnalyzerTest resource. |
| ChangePathAnalyzerTestCompartmentDetails.Builder |
| ChangePublicIpCompartmentDetails
The configuration details for the move operation.
|
| ChangePublicIpCompartmentDetails.Builder |
| ChangePublicIpPoolCompartmentDetails
The configuration details for the move operation.
|
| ChangePublicIpPoolCompartmentDetails.Builder |
| ChangeRemotePeeringConnectionCompartmentDetails
The configuration details for the move operation.
|
| ChangeRemotePeeringConnectionCompartmentDetails.Builder |
| ChangeRouteTableCompartmentDetails
The configuration details for the move operation.
|
| ChangeRouteTableCompartmentDetails.Builder |
| ChangeSecurityListCompartmentDetails
The configuration details for the move operation.
|
| ChangeSecurityListCompartmentDetails.Builder |
| ChangeServiceGatewayCompartmentDetails
The configuration details for the move operation.
|
| ChangeServiceGatewayCompartmentDetails.Builder |
| ChangeSubnetCompartmentDetails
The configuration details for the move operation.
|
| ChangeSubnetCompartmentDetails.Builder |
| ChangeVcnCompartmentDetails
The configuration details for the move operation.
|
| ChangeVcnCompartmentDetails.Builder |
| ChangeVirtualCircuitCompartmentDetails
The configuration details for the move operation.
|
| ChangeVirtualCircuitCompartmentDetails.Builder |
| ChangeVlanCompartmentDetails
The configuration details for the move operation.
|
| ChangeVlanCompartmentDetails.Builder |
| ChangeVtapCompartmentDetails
These configuration details are used in the move operation when changing the compartment
containing a virtual test access point (VTAP).
|
| ChangeVtapCompartmentDetails.Builder |
| CompartmentInternal
Helper definition required to perform authZ using SPLAT expressions on a Compartment
Note: Objects should always be created or deserialized using the CompartmentInternal.Builder. |
| CompartmentInternal.Builder |
| ComputeInstanceEndpoint
Defines the details required for a COMPUTE_INSTANCE-type
Endpoint. |
| ComputeInstanceEndpoint.Builder |
| ConnectLocalPeeringGatewaysDetails
Information about the other local peering gateway (LPG).
|
| ConnectLocalPeeringGatewaysDetails.Builder |
| ConnectRemotePeeringConnectionsDetails
Information about the other remote peering connection (RPC).
|
| ConnectRemotePeeringConnectionsDetails.Builder |
| Cpe
An object you create when setting up a Site-to-Site VPN between your on-premises network and VCN.
|
| Cpe.Builder |
| CpeDeviceConfigAnswer
An individual answer to a CPE device question.
|
| CpeDeviceConfigAnswer.Builder |
| CpeDeviceConfigQuestion
An individual question that the customer can answer about the CPE device.
|
| CpeDeviceConfigQuestion.Builder |
| CpeDeviceInfo
Basic information about a particular CPE device type.
|
| CpeDeviceInfo.Builder |
| CpeDeviceShapeDetail
The detailed information about a particular CPE device type.
|
| CpeDeviceShapeDetail.Builder |
| CpeDeviceShapeSummary
A summary of information about a particular CPE device type.
|
| CpeDeviceShapeSummary.Builder |
| CreateByoipRangeDetails
The information used to create a
ByoipRange resource. |
| CreateByoipRangeDetails.Builder |
| CreateCaptureFilterDetails
A capture filter contains a set of rules governing what traffic a VTAP mirrors.
|
| CreateCaptureFilterDetails.Builder |
| CreateCaptureFilterDetails.FilterType
Indicates which service will use this capture filter
|
| CreateCpeDetails
Note: Objects should always be created or deserialized using the CreateCpeDetails.Builder. |
| CreateCpeDetails.Builder |
| CreateCrossConnectDetails
Note: Objects should always be created or deserialized using the CreateCrossConnectDetails.Builder. |
| CreateCrossConnectDetails.Builder |
| CreateCrossConnectGroupDetails
Note: Objects should always be created or deserialized using the CreateCrossConnectGroupDetails.Builder. |
| CreateCrossConnectGroupDetails.Builder |
| CreateDhcpDetails
Note: Objects should always be created or deserialized using the CreateDhcpDetails.Builder. |
| CreateDhcpDetails.Builder |
| CreateDhcpDetails.DomainNameType
The search domain name type of DHCP options
|
| CreateDrgAttachmentDetails
Note: Objects should always be created or deserialized using the CreateDrgAttachmentDetails.Builder. |
| CreateDrgAttachmentDetails.Builder |
| CreateDrgDetails
Note: Objects should always be created or deserialized using the CreateDrgDetails.Builder. |
| CreateDrgDetails.Builder |
| CreateDrgRouteDistributionDetails
Details used to create a route distribution.
|
| CreateDrgRouteDistributionDetails.Builder |
| CreateDrgRouteDistributionDetails.DistributionType
Whether this distribution defines how routes get imported into route tables or exported
through DRG Attachments
|
| CreateDrgRouteTableDetails
Details used in a request to create a DRG route table.
|
| CreateDrgRouteTableDetails.Builder |
| CreateInternetGatewayDetails
Note: Objects should always be created or deserialized using the CreateInternetGatewayDetails.Builder. |
| CreateInternetGatewayDetails.Builder |
| CreateIPSecConnectionDetails
Note: Objects should always be created or deserialized using the CreateIPSecConnectionDetails.Builder. |
| CreateIPSecConnectionDetails.Builder |
| CreateIPSecConnectionDetails.CpeLocalIdentifierType
The type of identifier for your CPE device.
|
| CreateIPSecConnectionTunnelDetails
Note: Objects should always be created or deserialized using the CreateIPSecConnectionTunnelDetails.Builder. |
| CreateIPSecConnectionTunnelDetails.Builder |
| CreateIPSecConnectionTunnelDetails.IkeVersion
Internet Key Exchange protocol version.
|
| CreateIPSecConnectionTunnelDetails.NatTranslationEnabled
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| CreateIPSecConnectionTunnelDetails.OracleInitiation
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
| CreateIPSecConnectionTunnelDetails.Routing
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| CreateIPSecTunnelBgpSessionDetails
Note: Objects should always be created or deserialized using the CreateIPSecTunnelBgpSessionDetails.Builder. |
| CreateIPSecTunnelBgpSessionDetails.Builder |
| CreateIPSecTunnelEncryptionDomainDetails
Request to enable a multi-encryption domain policy on the IPSec tunnel.
|
| CreateIPSecTunnelEncryptionDomainDetails.Builder |
| CreateIpv6Details
Note: Objects should always be created or deserialized using the CreateIpv6Details.Builder. |
| CreateIpv6Details.Builder |
| CreateLocalPeeringGatewayDetails
Note: Objects should always be created or deserialized using the CreateLocalPeeringGatewayDetails.Builder. |
| CreateLocalPeeringGatewayDetails.Builder |
| CreateMacsecKey
Defines the secret
OCIDs held in
Vault that represent the MACsec key.
|
| CreateMacsecKey.Builder |
| CreateMacsecProperties
Properties used to configure MACsec (if capable).
|
| CreateMacsecProperties.Builder |
| CreateNatGatewayDetails
Note: Objects should always be created or deserialized using the CreateNatGatewayDetails.Builder. |
| CreateNatGatewayDetails.Builder |
| CreateNetworkSecurityGroupDetails
Note: Objects should always be created or deserialized using the CreateNetworkSecurityGroupDetails.Builder. |
| CreateNetworkSecurityGroupDetails.Builder |
| CreatePathAnalyzerTestDetails
Details used to create a
PathAnalyzerTest resource. |
| CreatePathAnalyzerTestDetails.Builder |
| CreatePrivateIpDetails
Note: Objects should always be created or deserialized using the CreatePrivateIpDetails.Builder. |
| CreatePrivateIpDetails.Builder |
| CreatePublicIpDetails
Note: Objects should always be created or deserialized using the CreatePublicIpDetails.Builder. |
| CreatePublicIpDetails.Builder |
| CreatePublicIpDetails.Lifetime
Defines when the public IP is deleted and released back to the Oracle Cloud Infrastructure
public IP pool.
|
| CreatePublicIpPoolDetails
The information used to create a public IP pool.
|
| CreatePublicIpPoolDetails.Builder |
| CreateRemotePeeringConnectionDetails
Note: Objects should always be created or deserialized using the CreateRemotePeeringConnectionDetails.Builder. |
| CreateRemotePeeringConnectionDetails.Builder |
| CreateRouteTableDetails
Note: Objects should always be created or deserialized using the CreateRouteTableDetails.Builder. |
| CreateRouteTableDetails.Builder |
| CreateSecurityListDetails
Note: Objects should always be created or deserialized using the CreateSecurityListDetails.Builder. |
| CreateSecurityListDetails.Builder |
| CreateServiceGatewayDetails
Note: Objects should always be created or deserialized using the CreateServiceGatewayDetails.Builder. |
| CreateServiceGatewayDetails.Builder |
| CreateSubnetDetails
Note: Objects should always be created or deserialized using the CreateSubnetDetails.Builder. |
| CreateSubnetDetails.Builder |
| CreateVcnDetails
Note: Objects should always be created or deserialized using the CreateVcnDetails.Builder. |
| CreateVcnDetails.Builder |
| CreateVirtualCircuitDetails
Note: Objects should always be created or deserialized using the CreateVirtualCircuitDetails.Builder. |
| CreateVirtualCircuitDetails.BgpAdminState
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| CreateVirtualCircuitDetails.Builder |
| CreateVirtualCircuitDetails.RoutingPolicy |
| CreateVirtualCircuitDetails.Type
The type of IP addresses used in this virtual circuit.
|
| CreateVirtualCircuitPublicPrefixDetails
Note: Objects should always be created or deserialized using the CreateVirtualCircuitPublicPrefixDetails.Builder. |
| CreateVirtualCircuitPublicPrefixDetails.Builder |
| CreateVlanDetails
Note: Objects should always be created or deserialized using the CreateVlanDetails.Builder. |
| CreateVlanDetails.Builder |
| CreateVnicDetails
Contains properties for a VNIC.
|
| CreateVnicDetails.Builder |
| CreateVtapDetails
These details are included in a request to create a virtual test access point (VTAP).
|
| CreateVtapDetails.Builder |
| CreateVtapDetails.EncapsulationProtocol
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| CreateVtapDetails.SourceType
The source type for the VTAP.
|
| CreateVtapDetails.TargetType
The target type for the VTAP.
|
| CreateVtapDetails.TrafficMode
Used to control the priority of traffic.
|
| CrossConnect
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnect.Builder |
| CrossConnect.LifecycleState
The cross-connect’s current state.
|
| CrossConnectGroup
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectGroup.Builder |
| CrossConnectGroup.LifecycleState
The cross-connect group’s current state.
|
| CrossConnectLocation
An individual FastConnect location.
|
| CrossConnectLocation.Builder |
| CrossConnectMapping
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMapping.Builder |
| CrossConnectMappingDetails
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMappingDetails.Builder |
| CrossConnectMappingDetails.Ipv4BgpStatus
The state of the Ipv4 BGP session.
|
| CrossConnectMappingDetails.Ipv6BgpStatus
The state of the Ipv6 BGP session.
|
| CrossConnectMappingDetailsCollection
An array of CrossConnectMappingDetails
Note: Objects should always be created or deserialized using the CrossConnectMappingDetailsCollection.Builder. |
| CrossConnectMappingDetailsCollection.Builder |
| CrossConnectPortSpeedShape
An individual port speed level for cross-connects.
|
| CrossConnectPortSpeedShape.Builder |
| CrossConnectStatus
The status of the cross-connect.
|
| CrossConnectStatus.Builder |
| CrossConnectStatus.EncryptionStatus
Encryption status of this cross connect.
|
| CrossConnectStatus.InterfaceState
Indicates whether Oracle’s side of the interface is up or down.
|
| CrossConnectStatus.LightLevelIndicator
Status indicator corresponding to the light level.
|
| DefaultDrgRouteTables
The default DRG route table for this DRG.
|
| DefaultDrgRouteTables.Builder |
| DefaultPhaseOneParameters
Default phase one parameters.
|
| DefaultPhaseOneParameters.Builder |
| DefaultPhaseTwoParameters
Default phase two parameters.
|
| DefaultPhaseTwoParameters.Builder |
| DeleteVirtualCircuitPublicPrefixDetails
Note: Objects should always be created or deserialized using the DeleteVirtualCircuitPublicPrefixDetails.Builder. |
| DeleteVirtualCircuitPublicPrefixDetails.Builder |
| DeniedSecurityAction
Defines the security action taken on denied traffic.
|
| DeniedSecurityAction.Builder |
| DeniedSecurityActionDetails
Defines details for the security action taken on denied traffic.
|
| DeniedSecurityActionDetails.Builder |
| DhcpDnsOption
DHCP option for specifying how DNS (hostname resolution) is handled in the subnets in the VCN.
|
| DhcpDnsOption.Builder |
| DhcpDnsOption.ServerType
VcnLocal: Reserved for future use.
|
| DhcpOption
A single DHCP option according to RFC 1533.
|
| DhcpOptions
A set of DHCP options.
|
| DhcpOptions.Builder |
| DhcpOptions.DomainNameType
The search domain name type of DHCP options
|
| DhcpOptions.LifecycleState
The current state of the set of DHCP options.
|
| DhcpSearchDomainOption
DHCP option for specifying a search domain name for DNS queries.
|
| DhcpSearchDomainOption.Builder |
| DpdConfig
These configuration details are used for dead peer detection (DPD).
|
| DpdConfig.Builder |
| DpdConfig.DpdMode
This option defines whether DPD can be initiated from the Oracle side of the connection.
|
| Drg
A dynamic routing gateway (DRG) is a virtual router that provides a path for private network
traffic between networks.
|
| Drg.Builder |
| Drg.LifecycleState
The DRG’s current state.
|
| DrgAttachment
A DRG attachment serves as a link between a DRG and a network resource.
|
| DrgAttachment.Builder |
| DrgAttachment.LifecycleState
The DRG attachment’s current state.
|
| DrgAttachmentIdDrgRouteDistributionMatchCriteria
The criteria by which a specific attachment will import routes to the DRG.
|
| DrgAttachmentIdDrgRouteDistributionMatchCriteria.Builder |
| DrgAttachmentInfo
The
DrgAttachmentInfo resource contains the
OCID of the DRG
attachment. |
| DrgAttachmentInfo.Builder |
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria
All routes are imported or exported.
|
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria.Builder |
| DrgAttachmentNetworkCreateDetails
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentNetworkCreateDetails.Type |
| DrgAttachmentNetworkDetails
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentNetworkDetails.Type |
| DrgAttachmentNetworkUpdateDetails
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentNetworkUpdateDetails.Type |
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria
The attachment type from which the DRG will import routes.
|
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria.AttachmentType
The type of the network resource to be included in this match.
|
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria.Builder |
| DrgRedundancyStatus
The redundancy status of the DRG.
|
| DrgRedundancyStatus.Builder |
| DrgRedundancyStatus.Status
The redundancy status of the DRG.
|
| DrgRouteDistribution
A route distribution establishes how routes get imported into DRG route tables and exported
through the DRG attachments.
|
| DrgRouteDistribution.Builder |
| DrgRouteDistribution.DistributionType
Whether this distribution defines how routes get imported into route tables or exported
through DRG attachments.
|
| DrgRouteDistribution.LifecycleState
The route distribution’s current state.
|
| DrgRouteDistributionMatchCriteria
The match criteria in a route distribution statement.
|
| DrgRouteDistributionMatchCriteria.MatchType
The type of the match criteria for a route distribution statement.
|
| DrgRouteDistributionStatement
A single statement within a route distribution.
|
DrgRouteDistributionStatement.Action
ACCEPT indicates the route should be imported or exported as-is. |
| DrgRouteDistributionStatement.Builder |
| DrgRouteRule
A DRG route rule is a mapping between a destination IP address range and a DRG attachment.
|
| DrgRouteRule.Builder |
| DrgRouteRule.DestinationType
The type of destination for the rule.
|
| DrgRouteRule.RouteProvenance
The earliest origin of a route.
|
| DrgRouteRule.RouteType
You can specify static routes for the DRG route table using the API.
|
| DrgRouteTable
All routing inside the DRG is driven by the contents of DRG route tables.
|
| DrgRouteTable.Builder |
| DrgRouteTable.LifecycleState
The DRG route table’s current state.
|
| DrgRoutingConfiguration
Identifies the DRG route table and rule that allowed the traffic to be forwarded.
|
| DrgRoutingConfiguration.Builder |
| EgressSecurityListConfiguration
Defines the subnet egress security list configuration that allowed the traffic.
|
| EgressSecurityListConfiguration.Builder |
| EgressSecurityRule
A rule for allowing outbound IP packets.
|
| EgressSecurityRule.Builder |
| EgressSecurityRule.DestinationType
Type of destination for the rule.
|
| EgressTrafficSpec
Defines the traffic configuration that leaves the traffic node.
|
| EgressTrafficSpec.Builder |
| EncryptionDomainConfig
Configuration information used by the encryption domain policy.
|
| EncryptionDomainConfig.Builder |
| Endpoint
Information describing a source or destination in a
PathAnalyzerTest resource. |
| Endpoint.Type
The type of the
Endpoint. |
| FastConnectProviderService
A service offering from a supported provider.
|
| FastConnectProviderService.BandwithShapeManagement
Who is responsible for managing the virtual circuit bandwidth.
|
| FastConnectProviderService.Builder |
| FastConnectProviderService.CustomerAsnManagement
Who is responsible for managing the ASN information for the network at the other end of the
connection from Oracle.
|
| FastConnectProviderService.PrivatePeeringBgpManagement
Who is responsible for managing the private peering BGP information.
|
| FastConnectProviderService.ProviderServiceKeyManagement
Who is responsible for managing the provider service key.
|
| FastConnectProviderService.PublicPeeringBgpManagement
Who is responsible for managing the public peering BGP information.
|
| FastConnectProviderService.SupportedVirtualCircuitTypes |
| FastConnectProviderService.Type
Provider service type.
|
| FastConnectProviderServiceKey
A provider service key and its details.
|
| FastConnectProviderServiceKey.Builder |
| FlowLogCaptureFilterRuleDetails
The set of rules governing what traffic the flow log collects when creating a flow log capture
filter.
|
| FlowLogCaptureFilterRuleDetails.Builder |
| FlowLogCaptureFilterRuleDetails.FlowLogType
Type or types of flow logs to store.
|
| FlowLogCaptureFilterRuleDetails.RuleAction
Include or exclude a ruleAction object.
|
| ForwardedRoutingAction
Defines the routing actions taken for traffic that is forwarded.
|
| ForwardedRoutingAction.Builder |
| ForwardedRoutingActionDetails
Defines details for the forwarded routing action.
|
| ForwardedRoutingActionDetails.Builder |
| ForwardedRoutingConfiguration
Defines the type of the resource that forwarded traffic.
|
| ForwardedRoutingConfiguration.Type
Type of the forwarded routing configuration.
|
| GetPathAnalysisDetails
Defines the configuration for getting a path analysis.
|
| GetPathAnalysisDetails.Type
The type of the
PathAnalysis query. |
| GetPublicIpByIpAddressDetails
IP address of the public IP.
|
| GetPublicIpByIpAddressDetails.Builder |
| GetPublicIpByPrivateIpIdDetails
Details of the private IP that the public IP is assigned to.
|
| GetPublicIpByPrivateIpIdDetails.Builder |
| IcmpOptions
Optional and valid only for ICMP and ICMPv6.
|
| IcmpOptions.Builder |
| IcmpProtocolParameters
Defines the configuration for the
ICMP protocol
parameters.
|
| IcmpProtocolParameters.Builder |
| IcmpTrafficProtocolParameters
Defines the
ProtocolParameters configuration for the
ICMP protocol. |
| IcmpTrafficProtocolParameters.Builder |
| IndeterminateRoutingAction
Defines the routing action taken on a traffic node where the routing action is INDETERMINATE.
|
| IndeterminateRoutingAction.Builder |
| IngressSecurityListConfiguration
Defines the subnet ingress security list configuration that allowed the traffic.
|
| IngressSecurityListConfiguration.Builder |
| IngressSecurityRule
A rule for allowing inbound IP packets.
|
| IngressSecurityRule.Builder |
| IngressSecurityRule.SourceType
Type of source for the rule.
|
| InternetGateway
Represents a router that connects the edge of a VCN with the Internet.
|
| InternetGateway.Builder |
| InternetGateway.LifecycleState
The internet gateway’s current state.
|
| IpAddressEndpoint
Defines the details required for an IP_ADDRESS-type
Endpoint. |
| IpAddressEndpoint.Builder |
| IPSecConnection
A connection between a DRG and CPE.
|
| IPSecConnection.Builder |
| IPSecConnection.CpeLocalIdentifierType
The type of identifier for your CPE device.
|
| IPSecConnection.LifecycleState
The IPSec connection’s current state.
|
| IPSecConnection.TransportType
The transport type used for the IPSec connection.
|
| IPSecConnectionDeviceConfig
Deprecated.
|
| IPSecConnectionDeviceConfig.Builder |
| IPSecConnectionDeviceStatus
Deprecated.
|
| IPSecConnectionDeviceStatus.Builder |
| IPSecConnectionTunnel
Information about a single IPSec tunnel in an IPSec connection.
|
| IPSecConnectionTunnel.Builder |
| IPSecConnectionTunnel.DpdMode
Dead peer detection (DPD) mode set on the Oracle side of the connection.
|
| IPSecConnectionTunnel.IkeVersion
Internet Key Exchange protocol version.
|
| IPSecConnectionTunnel.LifecycleState
The tunnel’s lifecycle state.
|
| IPSecConnectionTunnel.NatTranslationEnabled
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| IPSecConnectionTunnel.OracleCanInitiate
Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE
device, or both respond to and initiate requests.
|
| IPSecConnectionTunnel.Routing
The type of routing used for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| IPSecConnectionTunnel.Status
The status of the tunnel based on IPSec protocol characteristics.
|
| IPSecConnectionTunnelErrorDetails
Details for an error on an IPSec tunnel.
|
| IPSecConnectionTunnelErrorDetails.Builder |
| IPSecConnectionTunnelSharedSecret
The tunnel’s shared secret (pre-shared key).
|
| IPSecConnectionTunnelSharedSecret.Builder |
| IpsecTunnelDrgAttachmentNetworkDetails
Specifies the IPSec tunnel attached to the DRG.
|
| IpsecTunnelDrgAttachmentNetworkDetails.Builder |
| Ipv6
An IPv6 is a conceptual term that refers to an IPv6 address and related properties.
|
| Ipv6.Builder |
| Ipv6.LifecycleState
The IPv6’s current state.
|
| LetterOfAuthority
The Letter of Authority for the cross-connect.
|
| LetterOfAuthority.Builder |
| LetterOfAuthority.CircuitType
The type of cross-connect fiber, termination, and optical specification.
|
| LoadBalancerEndpoint
Defines the details required for a LOAD_BALANCER-type
Endpoint. |
| LoadBalancerEndpoint.Builder |
| LoadBalancerListenerEndpoint
Defines the details required for a LOAD_BALANCER_LISTENER-type
Endpoint. |
| LoadBalancerListenerEndpoint.Builder |
| LocalPeeringGateway
A local peering gateway (LPG) is an object on a VCN that lets that VCN peer with another VCN in
the same region.
|
| LocalPeeringGateway.Builder |
| LocalPeeringGateway.LifecycleState
The LPG’s current lifecycle state.
|
| LocalPeeringGateway.PeeringStatus
Whether the LPG is peered with another LPG.
|
| LoopBackDrgAttachmentNetworkDetails
Specifies the loopback attachment on the DRG.
|
| LoopBackDrgAttachmentNetworkDetails.Builder |
| MacsecEncryptionCipher
Type of encryption cipher suite to use for the MACsec connection.
|
| MacsecKey
An object defining the Secrets-in-Vault OCIDs representing the MACsec key.
|
| MacsecKey.Builder |
| MacsecProperties
Properties used for MACsec (if capable).
|
| MacsecProperties.Builder |
| MacsecState
Indicates whether or not MACsec is enabled.
|
| ModifyVcnCidrDetails
Details for updating a CIDR block.
|
| ModifyVcnCidrDetails.Builder |
| NatGateway
A NAT (Network Address Translation) gateway, which represents a router that lets instances
without public IPs contact the public internet without exposing the instance to inbound internet
traffic.
|
| NatGateway.Builder |
| NatGateway.LifecycleState
The NAT gateway’s current state.
|
| NetworkingTopology
Defines the representation of a virtual network topology for a region.
|
| NetworkingTopology.Builder |
| NetworkLoadBalancerEndpoint
Defines the details required for a NETWORK_LOAD_BALANCER-type
Endpoint. |
| NetworkLoadBalancerEndpoint.Builder |
| NetworkLoadBalancerListenerEndpoint
Defines the details required for a NETWORK_LOAD_BALANCER_LISTENER-type
Endpoint. |
| NetworkLoadBalancerListenerEndpoint.Builder |
| NetworkSecurityGroup
A network security group (NSG) provides virtual firewall rules for a specific set of
Vnic in a VCN. |
| NetworkSecurityGroup.Builder |
| NetworkSecurityGroup.LifecycleState
The network security group’s current state.
|
| NetworkSecurityGroupVnic
Information about a VNIC that belongs to a network security group.
|
| NetworkSecurityGroupVnic.Builder |
| NoRouteRoutingAction
Defines the routing actions taken on traffic when no route is found.
|
| NoRouteRoutingAction.Builder |
| NoRouteRoutingActionDetails
Defines the routing action taken on traffic flow with no route found.
|
| NoRouteRoutingActionDetails.Builder |
| NsgConfiguration
Defines the network security group configuration that allowed the traffic.
|
| NsgConfiguration.Builder |
| OnPremEndpoint
Defines the details required for an ON_PREM-type
Endpoint. |
| OnPremEndpoint.Builder |
| OperationStatus
Possible operation status.
|
| OperationType
Possible operation types.
|
| Path
Defines the configuration of the traffic path in
PathAnalysisResult. |
| Path.Builder |
| PathAnalysisWorkRequestResult
Defines the configuration of the path analysis result.
|
| PathAnalysisWorkRequestResult.Builder |
| PathAnalyzerTest
Defines the details saved in a
PathAnalyzerTest resource. |
| PathAnalyzerTest.Builder |
| PathAnalyzerTest.LifecycleState
The current state of the
PathAnalyzerTest resource. |
| PathAnalyzerTestCollection
The results of a
ListPathAnalyzerTests call in the current compartment. |
| PathAnalyzerTestCollection.Builder |
| PathAnalyzerTestSummary
Defines the summary of a
PathAnalyzerTest resource. |
| PathAnalyzerTestSummary.Builder |
| PathTopology
Defines the representation of a virtual network topology for path analysis.
|
| PathTopology.Builder |
| PersistedGetPathAnalysisDetails
Defines the configuration for getting a path analysis using the persisted
PathAnalyzerTest resource. |
| PersistedGetPathAnalysisDetails.Builder |
| PhaseOneConfigDetails
Configuration details for IKE phase one (ISAKMP) configuration parameters.
|
| PhaseOneConfigDetails.AuthenticationAlgorithm
The custom authentication algorithm proposed during phase one tunnel negotiation.
|
| PhaseOneConfigDetails.Builder |
| PhaseOneConfigDetails.DiffieHelmanGroup
The custom Diffie-Hellman group proposed during phase one tunnel negotiation.
|
| PhaseOneConfigDetails.EncryptionAlgorithm
The custom encryption algorithm proposed during phase one tunnel negotiation.
|
| PhaseTwoConfigDetails
Configuration details for IPSec phase two configuration parameters.
|
| PhaseTwoConfigDetails.AuthenticationAlgorithm
The authentication algorithm proposed during phase two tunnel negotiation.
|
| PhaseTwoConfigDetails.Builder |
| PhaseTwoConfigDetails.EncryptionAlgorithm
The encryption algorithm proposed during phase two tunnel negotiation.
|
| PhaseTwoConfigDetails.PfsDhGroup
The Diffie-Hellman group used for PFS, if PFS is enabled.
|
| PortRange
Note: Objects should always be created or deserialized using the PortRange.Builder. |
| PortRange.Builder |
| PrivateIp
A private IP is a conceptual term that refers to an IPv4 private IP address and related
properties.
|
| PrivateIp.Builder |
| ProtocolParameters
Defines the IP protocol parameters for a
PathAnalyzerTest resource. |
| ProtocolParameters.Type
The type of the
ProtocolParameters object. |
| PublicIp
A public IP is a conceptual term that refers to a public IP address and related properties.
|
| PublicIp.AssignedEntityType
The type of entity the public IP is assigned to, or in the process of being assigned to.
|
| PublicIp.Builder |
| PublicIp.LifecycleState
The public IP’s current state.
|
| PublicIp.Lifetime
Defines when the public IP is deleted and released back to Oracle’s public IP pool.
|
| PublicIp.Scope
Whether the public IP is regional or specific to a particular availability domain.
|
| PublicIpPool
A public IP pool is a set of public IP addresses represented as one or more IPv4 CIDR blocks.
|
| PublicIpPool.Builder |
| PublicIpPool.LifecycleState
The public IP pool’s current state.
|
| PublicIpPoolCollection
Results of a
ListPublicIpPool operation. |
| PublicIpPoolCollection.Builder |
| PublicIpPoolSummary
Summary information about a public IP pool.
|
| PublicIpPoolSummary.Builder |
| QueryOptions
Defines the query options required for a
PathAnalyzerTest resource. |
| QueryOptions.Builder |
| RemotePeeringConnection
A remote peering connection (RPC) is an object on a DRG that lets the VCN that is attached to the
DRG peer with a VCN in a different region.
|
| RemotePeeringConnection.Builder |
| RemotePeeringConnection.LifecycleState
The RPC’s current lifecycle state.
|
| RemotePeeringConnection.PeeringStatus
Whether the RPC is peered with another RPC.
|
| RemotePeeringConnectionDrgAttachmentNetworkDetails
Specifies the DRG attachment to another DRG.
|
| RemotePeeringConnectionDrgAttachmentNetworkDetails.Builder |
| RemoveDrgRouteDistributionStatementsDetails
Details request to remove statements from a route distribution.
|
| RemoveDrgRouteDistributionStatementsDetails.Builder |
| RemoveDrgRouteRulesDetails
Details used in a request to remove static routes from a DRG route table.
|
| RemoveDrgRouteRulesDetails.Builder |
| RemoveNetworkSecurityGroupSecurityRulesDetails
Note: Objects should always be created or deserialized using the RemoveNetworkSecurityGroupSecurityRulesDetails.Builder. |
| RemoveNetworkSecurityGroupSecurityRulesDetails.Builder |
| RemovePublicIpPoolCapacityDetails
The information needed to remove capacity from a public IP pool.
|
| RemovePublicIpPoolCapacityDetails.Builder |
| RemoveSubnetIpv6CidrDetails
Details object for removing an IPv6 CIDR Block from a Subnet.
|
| RemoveSubnetIpv6CidrDetails.Builder |
| RemoveVcnCidrDetails
Details for removing a CIDR block from a VCN.
|
| RemoveVcnCidrDetails.Builder |
| RemoveVcnIpv6CidrDetails
Details used when removing ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or
BYOIPv6 prefix.
|
| RemoveVcnIpv6CidrDetails.Builder |
| RouteRule
A mapping between a destination IP address range and a virtual device to route matching packets
to (a target).
|
| RouteRule.Builder |
| RouteRule.DestinationType
Type of destination for the rule.
|
| RouteRule.RouteType
A route rule can be STATIC if manually added to the route table, LOCAL if added by OCI to the
route table.
|
| RouteTable
A collection of
RouteRule objects, which are used to route packets based on destination
IP to a particular network entity. |
| RouteTable.Builder |
| RouteTable.LifecycleState
The route table’s current state.
|
| RoutingAction
Defines the details for routing actions taken on the traffic flow.
|
| RoutingAction.Action
The routing action taken on the traffic flow.
|
| RoutingAction.ActionType
The type of the routing support for the traffic flow.
|
| SecurityAction
Defines the security action details taken on the traffic.
|
| SecurityAction.Action
Action taken on the traffic.
|
| SecurityAction.ActionType
Type of the
SecurityAction. |
| SecurityList
A set of virtual firewall rules for your VCN.
|
| SecurityList.Builder |
| SecurityList.LifecycleState
The security list’s current state.
|
| SecurityRule
A security rule is one of the items in a
NetworkSecurityGroup. |
| SecurityRule.Builder |
| SecurityRule.DestinationType
Type of destination for the rule.
|
| SecurityRule.Direction
Direction of the security rule.
|
| SecurityRule.SourceType
Type of source for the rule.
|
| Service
An object that represents one or multiple Oracle services that you can enable for a
ServiceGateway. |
| Service.Builder |
| ServiceGateway
Represents a router that lets your VCN privately access specific Oracle services such as Object
Storage without exposing the VCN to the public internet.
|
| ServiceGateway.Builder |
| ServiceGateway.LifecycleState
The service gateway’s current state.
|
| ServiceIdRequestDetails
Note: Objects should always be created or deserialized using the ServiceIdRequestDetails.Builder. |
| ServiceIdRequestDetails.Builder |
| ServiceIdResponseDetails
Note: Objects should always be created or deserialized using the ServiceIdResponseDetails.Builder. |
| ServiceIdResponseDetails.Builder |
| SortOrder
Allowed sort orders, either ‘ASC’ for ascending or ‘DESC’ for descending.
|
| StatefulEgressSecurityListConfiguration
Defines the stateful subnet egress security list configuration that allowed the ingress traffic.
|
| StatefulEgressSecurityListConfiguration.Builder |
| StatefulIngressSecurityListConfiguration
Defines the stateful subnet ingress security list configuration that allowed the egress traffic.
|
| StatefulIngressSecurityListConfiguration.Builder |
| StatefulNsgConfiguration
Defines the stateful network security group configuration that allowed the traffic.
|
| StatefulNsgConfiguration.Builder |
| Subnet
A logical subdivision of a VCN.
|
| Subnet.Builder |
| Subnet.LifecycleState
The subnet’s current state.
|
| SubnetEndpoint
Defines the details required for a SUBNET-type
Endpoint. |
| SubnetEndpoint.Builder |
| SubnetTopology
Defines the visualization of a subnet in a VCN.
|
| SubnetTopology.Builder |
| TcpOptions
Optional and valid only for TCP.
|
| TcpOptions.Builder |
| TcpProtocolParameters
Defines the configuration for TCP protocol parameters.
|
| TcpProtocolParameters.Builder |
| TcpTrafficProtocolParameters
Defines the
TrafficProtocolParameters configuration for the TCP protocol. |
| TcpTrafficProtocolParameters.Builder |
| Topology
Defines the representation of a virtual network topology.
|
| Topology.Type
Type of the topology object.
|
| TopologyAssociatedWithEntityRelationship
Defines the
AssociatedWith relationship between virtual network topology entities. |
| TopologyAssociatedWithEntityRelationship.Builder |
| TopologyAssociatedWithRelationshipDetails
Defines association details for an
associatedWith relationship. |
| TopologyAssociatedWithRelationshipDetails.Builder |
| TopologyContainsEntityRelationship
Defines the
contains relationship between virtual network topology entities. |
| TopologyContainsEntityRelationship.Builder |
| TopologyEntityRelationship
Defines the relationship between Virtual Network topology entities.
|
| TopologyEntityRelationship.Type
The type of relationship between the entities.
|
| TopologyRoutesToEntityRelationship
Defines the
routesTo relationship between virtual network topology entities. |
| TopologyRoutesToEntityRelationship.Builder |
| TopologyRoutesToRelationshipDetails
Defines route rule details for a
routesTo relationship. |
| TopologyRoutesToRelationshipDetails.Builder |
| TopologyRoutesToRelationshipDetails.RouteType
A route rule can be
STATIC if manually added to the route table or DYNAMIC if
imported from another route table. |
| TrafficNode
Defines the configuration of the OCI entity that represents a traffic node in
PathAnalysisResult. |
| TrafficNode.Type
Type of the
TrafficNode. |
| TrafficProtocolParameters
Defines the traffic protocol parameters for the traffic in a
PathAnalysisResult. |
| TrafficProtocolParameters.Type
Type of the
TrafficProtocolParameters object. |
| TrafficRoute
Defines the traffic route taken in the path in
PathAnalysisResult. |
| TrafficRoute.Builder |
| TrafficRoute.ReachabilityStatus
Reachability status for the given traffic route.
|
| TunnelConfig
Deprecated.
|
| TunnelConfig.Builder |
| TunnelCpeDeviceConfig
The set of CPE configuration answers for the tunnel, which the customer provides in
updateTunnelCpeDeviceConfig. |
| TunnelCpeDeviceConfig.Builder |
| TunnelPhaseOneDetails
IPSec tunnel details specific to ISAKMP phase one.
|
| TunnelPhaseOneDetails.Builder |
| TunnelPhaseTwoDetails
IPsec tunnel detail information specific to phase two.
|
| TunnelPhaseTwoDetails.Builder |
| TunnelRouteSummary
A summary of the routes advertised to and received from the on-premises network.
|
| TunnelRouteSummary.Advertiser
The source of the route advertisement.
|
| TunnelRouteSummary.Builder |
| TunnelSecurityAssociationSummary
A summary of the IPSec tunnel security association details.
|
| TunnelSecurityAssociationSummary.Builder |
| TunnelSecurityAssociationSummary.TunnelSaStatus
The IPSec tunnel’s phase one status.
|
| TunnelStatus
Deprecated.
|
| TunnelStatus.Builder |
| TunnelStatus.LifecycleState
The tunnel’s current state.
|
| UdpOptions
Optional and valid only for UDP.
|
| UdpOptions.Builder |
| UdpProtocolParameters
Defines the configuration for UDP protocol parameters.
|
| UdpProtocolParameters.Builder |
| UdpTrafficProtocolParameters
Defines the
TrafficProtocolParameters configuration for the UDP protocol. |
| UdpTrafficProtocolParameters.Builder |
| UpdateByoipRangeDetails
The information used to update a
ByoipRange resource. |
| UpdateByoipRangeDetails.Builder |
| UpdateCaptureFilterDetails
These details can be included in a request to update a capture filter.
|
| UpdateCaptureFilterDetails.Builder |
| UpdateCpeDetails
Note: Objects should always be created or deserialized using the UpdateCpeDetails.Builder. |
| UpdateCpeDetails.Builder |
| UpdateCrossConnectDetails
Update a CrossConnect
Note: Objects should always be created or deserialized using the UpdateCrossConnectDetails.Builder. |
| UpdateCrossConnectDetails.Builder |
| UpdateCrossConnectGroupDetails
Note: Objects should always be created or deserialized using the UpdateCrossConnectGroupDetails.Builder. |
| UpdateCrossConnectGroupDetails.Builder |
| UpdateDhcpDetails
Note: Objects should always be created or deserialized using the UpdateDhcpDetails.Builder. |
| UpdateDhcpDetails.Builder |
| UpdateDhcpDetails.DomainNameType
The search domain name type of DHCP options
|
| UpdatedNetworkSecurityGroupSecurityRules
Note: Objects should always be created or deserialized using the UpdatedNetworkSecurityGroupSecurityRules.Builder. |
| UpdatedNetworkSecurityGroupSecurityRules.Builder |
| UpdateDrgAttachmentDetails
Note: Objects should always be created or deserialized using the UpdateDrgAttachmentDetails.Builder. |
| UpdateDrgAttachmentDetails.Builder |
| UpdateDrgDetails
Note: Objects should always be created or deserialized using the UpdateDrgDetails.Builder. |
| UpdateDrgDetails.Builder |
| UpdateDrgRouteDistributionDetails
Details used in a request to update a route distribution.
|
| UpdateDrgRouteDistributionDetails.Builder |
| UpdateDrgRouteDistributionStatementDetails
Route distribution statements to update in the route distribution.
|
| UpdateDrgRouteDistributionStatementDetails.Builder |
| UpdateDrgRouteDistributionStatementsDetails
Details request to update statements in a route distribution.
|
| UpdateDrgRouteDistributionStatementsDetails.Builder |
| UpdateDrgRouteRuleDetails
Details used to update a route rule in the DRG route table.
|
| UpdateDrgRouteRuleDetails.Builder |
| UpdateDrgRouteRuleDetails.DestinationType
Type of destination for the rule.
|
| UpdateDrgRouteRulesDetails
Details used to update route rules in a DRG route table.
|
| UpdateDrgRouteRulesDetails.Builder |
| UpdateDrgRouteTableDetails
Details used in a request to update a DRG route table.
|
| UpdateDrgRouteTableDetails.Builder |
| UpdateInternetGatewayDetails
Note: Objects should always be created or deserialized using the UpdateInternetGatewayDetails.Builder. |
| UpdateInternetGatewayDetails.Builder |
| UpdateIPSecConnectionDetails
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionDetails.Builder. |
| UpdateIPSecConnectionDetails.Builder |
| UpdateIPSecConnectionDetails.CpeLocalIdentifierType
The type of identifier for your CPE device.
|
| UpdateIPSecConnectionTunnelDetails
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelDetails.Builder. |
| UpdateIPSecConnectionTunnelDetails.Builder |
| UpdateIPSecConnectionTunnelDetails.IkeVersion
Internet Key Exchange protocol version.
|
| UpdateIPSecConnectionTunnelDetails.NatTranslationEnabled
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| UpdateIPSecConnectionTunnelDetails.OracleInitiation
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
| UpdateIPSecConnectionTunnelDetails.Routing
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| UpdateIPSecConnectionTunnelSharedSecretDetails
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelSharedSecretDetails.Builder. |
| UpdateIPSecConnectionTunnelSharedSecretDetails.Builder |
| UpdateIPSecTunnelBgpSessionDetails
Note: Objects should always be created or deserialized using the UpdateIPSecTunnelBgpSessionDetails.Builder. |
| UpdateIPSecTunnelBgpSessionDetails.Builder |
| UpdateIPSecTunnelEncryptionDomainDetails
Request to update a multi-encryption domain policy on the IPSec tunnel.
|
| UpdateIPSecTunnelEncryptionDomainDetails.Builder |
| UpdateIpv6Details
Note: Objects should always be created or deserialized using the UpdateIpv6Details.Builder. |
| UpdateIpv6Details.Builder |
| UpdateLocalPeeringGatewayDetails
Note: Objects should always be created or deserialized using the UpdateLocalPeeringGatewayDetails.Builder. |
| UpdateLocalPeeringGatewayDetails.Builder |
| UpdateMacsecKey
An object defining the OCID of the Secret held in Vault that represent the MACsec key.
|
| UpdateMacsecKey.Builder |
| UpdateMacsecProperties
Properties used to update MACsec settings.
|
| UpdateMacsecProperties.Builder |
| UpdateNatGatewayDetails
Note: Objects should always be created or deserialized using the UpdateNatGatewayDetails.Builder. |
| UpdateNatGatewayDetails.Builder |
| UpdateNetworkSecurityGroupDetails
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupDetails.Builder. |
| UpdateNetworkSecurityGroupDetails.Builder |
| UpdateNetworkSecurityGroupSecurityRulesDetails
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupSecurityRulesDetails.Builder. |
| UpdateNetworkSecurityGroupSecurityRulesDetails.Builder |
| UpdatePathAnalyzerTestDetails
Details to update a
PathAnalyzerTest resource. |
| UpdatePathAnalyzerTestDetails.Builder |
| UpdatePrivateIpDetails
Note: Objects should always be created or deserialized using the UpdatePrivateIpDetails.Builder. |
| UpdatePrivateIpDetails.Builder |
| UpdatePublicIpDetails
Note: Objects should always be created or deserialized using the UpdatePublicIpDetails.Builder. |
| UpdatePublicIpDetails.Builder |
| UpdatePublicIpPoolDetails
The data to update for a public IP pool.
|
| UpdatePublicIpPoolDetails.Builder |
| UpdateRemotePeeringConnectionDetails
Note: Objects should always be created or deserialized using the UpdateRemotePeeringConnectionDetails.Builder. |
| UpdateRemotePeeringConnectionDetails.Builder |
| UpdateRouteTableDetails
Note: Objects should always be created or deserialized using the UpdateRouteTableDetails.Builder. |
| UpdateRouteTableDetails.Builder |
| UpdateSecurityListDetails
Note: Objects should always be created or deserialized using the UpdateSecurityListDetails.Builder. |
| UpdateSecurityListDetails.Builder |
| UpdateSecurityRuleDetails
A rule for allowing inbound (
direction= INGRESS) or outbound (direction= EGRESS)
IP packets. |
| UpdateSecurityRuleDetails.Builder |
| UpdateSecurityRuleDetails.DestinationType
Type of destination for the rule.
|
| UpdateSecurityRuleDetails.Direction
Direction of the security rule.
|
| UpdateSecurityRuleDetails.SourceType
Type of source for the rule.
|
| UpdateServiceGatewayDetails
Note: Objects should always be created or deserialized using the UpdateServiceGatewayDetails.Builder. |
| UpdateServiceGatewayDetails.Builder |
| UpdateSubnetDetails
Note: Objects should always be created or deserialized using the UpdateSubnetDetails.Builder. |
| UpdateSubnetDetails.Builder |
| UpdateTunnelCpeDeviceConfigDetails
Note: Objects should always be created or deserialized using the UpdateTunnelCpeDeviceConfigDetails.Builder. |
| UpdateTunnelCpeDeviceConfigDetails.Builder |
| UpdateVcnDetails
Note: Objects should always be created or deserialized using the UpdateVcnDetails.Builder. |
| UpdateVcnDetails.Builder |
| UpdateVirtualCircuitDetails
Note: Objects should always be created or deserialized using the UpdateVirtualCircuitDetails.Builder. |
| UpdateVirtualCircuitDetails.BgpAdminState
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| UpdateVirtualCircuitDetails.Builder |
| UpdateVirtualCircuitDetails.ProviderState
The provider’s state in relation to this virtual circuit.
|
| UpdateVirtualCircuitDetails.RoutingPolicy |
| UpdateVlanDetails
Note: Objects should always be created or deserialized using the UpdateVlanDetails.Builder. |
| UpdateVlanDetails.Builder |
| UpdateVnicDetails
Note: Objects should always be created or deserialized using the UpdateVnicDetails.Builder. |
| UpdateVnicDetails.Builder |
| UpdateVtapDetails
These details can be included in a request to update a virtual test access point (VTAP).
|
| UpdateVtapDetails.Builder |
| UpdateVtapDetails.EncapsulationProtocol
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| UpdateVtapDetails.SourceType
The source type for the VTAP.
|
| UpdateVtapDetails.TargetType
The target type for the VTAP.
|
| UpdateVtapDetails.TrafficMode
Used to control the priority of traffic.
|
| UpgradeStatus
The upgrade status of a DRG.
|
| UpgradeStatus.Builder |
| UpgradeStatus.Status
The current upgrade status of the DRG attachment.
|
| Vcn
A virtual cloud network (VCN).
|
| Vcn.Builder |
| Vcn.LifecycleState
The VCN’s current state.
|
| VcnDnsResolverAssociation
The information about the VCN and the DNS resolver in the association.
|
| VcnDnsResolverAssociation.Builder |
| VcnDnsResolverAssociation.LifecycleState
The current state of the association.
|
| VcnDrgAttachmentNetworkCreateDetails
Specifies the VCN Attachment
Note: Objects should always be created or deserialized using the VcnDrgAttachmentNetworkCreateDetails.Builder. |
| VcnDrgAttachmentNetworkCreateDetails.Builder |
| VcnDrgAttachmentNetworkDetails
Specifies details within the VCN.
|
| VcnDrgAttachmentNetworkDetails.Builder |
| VcnDrgAttachmentNetworkDetails.VcnRouteType
Indicates whether the VCN CIDRs or the individual subnet CIDRs are imported from the
attachment.
|
| VcnDrgAttachmentNetworkUpdateDetails
Specifies the update details for the VCN attachment.
|
| VcnDrgAttachmentNetworkUpdateDetails.Builder |
| VcnRoutingConfiguration
Identifies the VCN route table and rule that allowed the traffic to be forwarded.
|
| VcnRoutingConfiguration.Builder |
| VcnTopology
Defines the representation of a virtual network topology for a VCN.
|
| VcnTopology.Builder |
| VirtualCircuit
For use with Oracle Cloud Infrastructure FastConnect.
|
| VirtualCircuit.BgpAdminState
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| VirtualCircuit.BgpIpv6SessionState
The state of the Ipv6 BGP session associated with the virtual circuit.
|
| VirtualCircuit.BgpManagement
Deprecated.
|
| VirtualCircuit.BgpSessionState
The state of the Ipv4 BGP session associated with the virtual circuit.
|
| VirtualCircuit.Builder |
| VirtualCircuit.LifecycleState
The virtual circuit’s current state.
|
| VirtualCircuit.ProviderState
The provider’s state in relation to this virtual circuit (if the customer is connecting via a
provider).
|
| VirtualCircuit.RoutingPolicy |
| VirtualCircuit.ServiceType
Provider service type.
|
| VirtualCircuit.Type
Whether the virtual circuit supports private or public peering.
|
| VirtualCircuitAssociatedTunnelDetails
Detailed private tunnel info associated with the virtual circuit.
|
| VirtualCircuitAssociatedTunnelDetails.Builder |
| VirtualCircuitAssociatedTunnelDetails.TunnelType
The type of the tunnel associated with the virtual circuit.
|
| VirtualCircuitBandwidthShape
An individual bandwidth level for virtual circuits.
|
| VirtualCircuitBandwidthShape.Builder |
| VirtualCircuitDrgAttachmentNetworkDetails
Specifies the virtual circuit attached to the DRG.
|
| VirtualCircuitDrgAttachmentNetworkDetails.Builder |
| VirtualCircuitIpMtu
The layer 3 IP MTU to use with this virtual circuit.
|
| VirtualCircuitPublicPrefix
A public IP prefix and its details.
|
| VirtualCircuitPublicPrefix.Builder |
| VirtualCircuitPublicPrefix.VerificationState
Oracle must verify that the customer owns the public IP prefix before traffic for that prefix
can flow across the virtual circuit.
|
| VisibleTrafficNode
Defines the configuration of a traffic node that is visible to the user.
|
| VisibleTrafficNode.Builder |
| Vlan
A resource to be used only with the Oracle Cloud VMware Solution.
|
| Vlan.Builder |
| Vlan.LifecycleState
The VLAN’s current state.
|
| VlanEndpoint
Defines the details required for a VLAN-type
Endpoint. |
| VlanEndpoint.Builder |
| Vnic
A virtual network interface card.
|
| Vnic.Builder |
| Vnic.LifecycleState
The current state of the VNIC.
|
| VnicEndpoint
Defines the details required for a VNIC-type
Endpoint. |
| VnicEndpoint.Builder |
| Vtap
A virtual test access point (VTAP) provides a way to mirror all traffic from a designated source
to a selected target in order to facilitate troubleshooting, security analysis, and data
monitoring.
|
| Vtap.Builder |
| Vtap.EncapsulationProtocol
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| Vtap.LifecycleState
The VTAP’s administrative lifecycle state.
|
| Vtap.LifecycleStateDetails
The VTAP’s current running state.
|
| Vtap.SourceType
The source type for the VTAP.
|
| Vtap.TargetType
The target type for the VTAP.
|
| Vtap.TrafficMode
Used to control the priority of traffic.
|
| VtapCaptureFilterRuleDetails
This resource contains the rules governing what traffic a VTAP mirrors.
|
| VtapCaptureFilterRuleDetails.Builder |
| VtapCaptureFilterRuleDetails.RuleAction
Include or exclude packets meeting this definition from mirrored traffic.
|
| VtapCaptureFilterRuleDetails.TrafficDirection
The traffic direction the VTAP is configured to mirror.
|
| WorkRequest
An asynchronous work request.
|
| WorkRequest.Builder |
| WorkRequestError
An error encountered while executing an operation that is tracked by a work request.
|
| WorkRequestError.Builder |
| WorkRequestErrorCollection
Results of a
WorkRequestError search. |
| WorkRequestErrorCollection.Builder |
| WorkRequestLogEntry
A log message from executing an operation that is tracked by a work request.
|
| WorkRequestLogEntry.Builder |
| WorkRequestLogEntryCollection
Results of a
WorkRequestLog search. |
| WorkRequestLogEntryCollection.Builder |
| WorkRequestResource
A resource created or operated on by a work request.
|
| WorkRequestResource.Builder |
| WorkRequestResult
Ephemeral data resulting from an asynchronous operation.
|
| WorkRequestResult.ResultType
Type of
WorkRequestResult. |
| WorkRequestResultCollection
Results of a
WorkRequestResult search. |
| WorkRequestResultCollection.Builder |
| WorkRequestSummary
A summary of the status of a work request.
|
| WorkRequestSummary.Builder |
| WorkRequestSummaryCollection
Results of a
WorkRequest search. |
| WorkRequestSummaryCollection.Builder |
| Class and Description |
|---|
| ChangePathAnalyzerTestCompartmentDetails
Details of the new
compartmentId for the PathAnalyzerTest resource. |
| CreatePathAnalyzerTestDetails
Details used to create a
PathAnalyzerTest resource. |
| GetPathAnalysisDetails
Defines the configuration for getting a path analysis.
|
| OperationStatus
Possible operation status.
|
| PathAnalyzerTest.LifecycleState
The current state of the
PathAnalyzerTest resource. |
| UpdatePathAnalyzerTestDetails
Details to update a
PathAnalyzerTest resource. |
| WorkRequestResult.ResultType
Type of
WorkRequestResult. |
| Class and Description |
|---|
| PathAnalyzerTest
Defines the details saved in a
PathAnalyzerTest resource. |
| PathAnalyzerTestCollection
The results of a
ListPathAnalyzerTests call in the current compartment. |
| WorkRequest
An asynchronous work request.
|
| WorkRequestErrorCollection
Results of a
WorkRequestError search. |
| WorkRequestLogEntryCollection
Results of a
WorkRequestLog search. |
| WorkRequestResultCollection
Results of a
WorkRequestResult search. |
| WorkRequestSummaryCollection
Results of a
WorkRequest search. |
Copyright © 2016–2024. All rights reserved.