Changing External Access to a VLAN

Learn how to change external access to a VLAN. Change the access type or add or rename IP addresses.

Using the Console

Open the navigation menu, click Networking, and then click Virtual cloud networks.
Click the VCN that contains the VLAN you want to change.

If you don't see the VCN listed, ensure that you have the correct compartment selected.
Under Resources, click VLANs.
Click the name of the VLAN to view details about it.
In the External Access list, select the external access you want to change, click the Actions menu (), and then click the Edit.
The settings you can change depend on the external access type. Consider the following:
- You can change the external access type from route target only to public access, or the other way around.
  
  If you change the type from public access to route target only, the private IP address will no longer have an associated reserved IP address. Therefore, any host that uses the private IP address will not be accessible from the internet.
  
  If you change the type from route target only to public access, you'll need to attach a reserved public IP address to it to enable access from the internet. You can select an existing public IP address or have a new one created for this purpose.
- For both route target only and public access types, you can rename the private IP address but you can't change the IP address value itself.
- For a public access type, you can rename the reserved public IP address but you cannot change the IP address value itself.
When you're done making updates, click Save Changes.