Fleet Software Update Functions

Package: DBMS_CLOUD_OCI_FSU_FLEET_SOFTWARE_UPDATE

ABORT_FSU_DISCOVERY Function

Aborts Exadata Fleet Update Discovery in progress.

Syntax

FUNCTION abort_fsu_discovery (
  fsu_discovery_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_abort_fsu_discovery_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

ADD_FSU_COLLECTION_TARGETS Function

Adds targets to an existing Exadata Fleet Update Collection. Targets that are already part of a different Collection with an active Fleet Software Update Cycle cannot be added. This operation can only be performed on Collections that do not have an Action executing under an active Fleet Software Update Cycle. Additionally, during an active Fleet Software Update Cycle, targets can be added only prior to executing an Apply Action. This will require running a new Stage Action for the active Cycle.

Syntax

FUNCTION add_fsu_collection_targets (
  fsu_collection_id varchar2,
  add_fsu_collection_targets_details dbms_cloud_oci_fleet_software_update_add_fsu_collection_targets_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_add_fsu_collection_targets_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`add_fsu_collection_targets_details`	(required) The Targets to be added into the Exadata Fleet Update Collection.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CANCEL_FSU_ACTION Function

Cancels a scheduled Action. Only applicable for Actions that have not started executing.

Syntax

FUNCTION cancel_fsu_action (
  fsu_action_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_cancel_fsu_action_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CHANGE_FSU_ACTION_COMPARTMENT Function

Moves a Exadata Fleet Update Action resource from one compartment identifier to another. When provided, If-Match is checked against ETag values of the resource.

Syntax

FUNCTION change_fsu_action_compartment (
  fsu_action_id varchar2,
  change_fsu_action_compartment_details dbms_cloud_oci_fleet_software_update_change_fsu_action_compartment_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_change_fsu_action_compartment_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`change_fsu_action_compartment_details`	(required) The compartment where the Exadata Fleet Update Action will be moved to.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CHANGE_FSU_COLLECTION_COMPARTMENT Function

Moves a Exadata Fleet Update Collection resource from one compartment identifier to another. When provided, If-Match is checked against ETag values of the resource.

Syntax

FUNCTION change_fsu_collection_compartment (
  fsu_collection_id varchar2,
  change_fsu_collection_compartment_details dbms_cloud_oci_fleet_software_update_change_fsu_collection_compartment_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_change_fsu_collection_compartment_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`change_fsu_collection_compartment_details`	(required) The compartment where the Exadata Fleet Update Collection will be moved to.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CHANGE_FSU_CYCLE_COMPARTMENT Function

Moves a Exadata Fleet Update Cycle resource from one compartment identifier to another. When provided, If-Match is checked against ETag values of the resource.

Syntax

FUNCTION change_fsu_cycle_compartment (
  fsu_cycle_id varchar2,
  change_fsu_cycle_compartment_details dbms_cloud_oci_fleet_software_update_change_fsu_cycle_compartment_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_change_fsu_cycle_compartment_response_t;

Parameters

Parameter	Description
`fsu_cycle_id`	(required) Unique Exadata Fleet Update Cycle identifier.
`change_fsu_cycle_compartment_details`	(required) The compartment where the Exadata Fleet Update Cycle will be moved to.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CHANGE_FSU_DISCOVERY_COMPARTMENT Function

Moves a Exadata Fleet Update Discovery resource from one compartment identifier to another. When provided, If-Match is checked against ETag values of the resource.

Syntax

FUNCTION change_fsu_discovery_compartment (
  fsu_discovery_id varchar2,
  change_fsu_discovery_compartment_details dbms_cloud_oci_fleet_software_update_change_fsu_discovery_compartment_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_change_fsu_discovery_compartment_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`change_fsu_discovery_compartment_details`	(required) The compartment where the Exadata Fleet Update Discovery will be moved to
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CLONE_FSU_CYCLE Function

Clones existing Exadata Fleet Update Cycle details into a new Exadata Fleet Update Cycle resource.

Syntax

FUNCTION clone_fsu_cycle (
  fsu_cycle_id varchar2,
  clone_fsu_cycle_details dbms_cloud_oci_fleet_software_update_clone_fsu_cycle_details_t,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_clone_fsu_cycle_response_t;

Parameters

Parameter	Description
`fsu_cycle_id`	(required) Unique Exadata Fleet Update Cycle identifier.
`clone_fsu_cycle_details`	(required) The Exadata Fleet Update Cycle properties to be updated in the cloned Cycle instead of using the existing values.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CREATE_FSU_ACTION Function

Creates a new Exadata Fleet Update Action.

Syntax

FUNCTION create_fsu_action (
  create_fsu_action_details dbms_cloud_oci_fleet_software_update_create_fsu_action_details_t,
  opc_retry_token varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_create_fsu_action_response_t;

Parameters

Parameter	Description
`create_fsu_action_details`	(required) Details for the new Exadata Fleet Update Action.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CREATE_FSU_COLLECTION Function

Creates a new Exadata Fleet Update Collection.

Syntax

FUNCTION create_fsu_collection (
  create_fsu_collection_details dbms_cloud_oci_fleet_software_update_create_fsu_collection_details_t,
  opc_retry_token varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_create_fsu_collection_response_t;

Parameters

Parameter	Description
`create_fsu_collection_details`	(required) Details for the new Exadata Fleet Update Collection.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CREATE_FSU_CYCLE Function

Creates a new Exadata Fleet Update Cycle.

Syntax

FUNCTION create_fsu_cycle (
  create_fsu_cycle_details dbms_cloud_oci_fleet_software_update_create_fsu_cycle_details_t,
  opc_retry_token varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_create_fsu_cycle_response_t;

Parameters

Parameter	Description
`create_fsu_cycle_details`	(required) Details for the new Exadata Fleet Update Cycle.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

CREATE_FSU_DISCOVERY Function

Creates a new Exadata Fleet Update Discovery.

Syntax

FUNCTION create_fsu_discovery (
  create_fsu_discovery_details dbms_cloud_oci_fleet_software_update_create_fsu_discovery_details_t,
  opc_retry_token varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_create_fsu_discovery_response_t;

Parameters

Parameter	Description
`create_fsu_discovery_details`	(required) Details for the new Exadata Fleet Update Discovery.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

DELETE_FSU_ACTION Function

Deletes a Exadata Fleet Update Action resource by identifier.

Syntax

FUNCTION delete_fsu_action (
  fsu_action_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_delete_fsu_action_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

DELETE_FSU_COLLECTION Function

Deletes a Exadata Fleet Update Collection resource by identifier.

Syntax

FUNCTION delete_fsu_collection (
  fsu_collection_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_delete_fsu_collection_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

DELETE_FSU_CYCLE Function

Deletes a Exadata Fleet Update Cycle resource by identifier.

Syntax

FUNCTION delete_fsu_cycle (
  fsu_cycle_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_delete_fsu_cycle_response_t;

Parameters

Parameter	Description
`fsu_cycle_id`	(required) Unique Exadata Fleet Update Cycle identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

DELETE_FSU_DISCOVERY Function

Deletes a Exadata Fleet Update Discovery resource by identifier.

Syntax

FUNCTION delete_fsu_discovery (
  fsu_discovery_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_delete_fsu_discovery_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

DELETE_FSU_JOB Function

Deletes the Exadata Fleet Update Job resource by identifier.

Syntax

FUNCTION delete_fsu_job (
  fsu_job_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  if_match varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_delete_fsu_job_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`opc_request_id`	(optional) The client request ID for tracing.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_ACTION Function

Gets a Exadata Fleet Update Action by identifier.

Syntax

FUNCTION get_fsu_action (
  fsu_action_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_action_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_ACTION_OUTPUT_CONTENT Function

Gets the Exadata Fleet Update Action Output content as a binary file (string). This will only include the output from FAILED Exadata Fleet Update Jobs. No content in case there are no FAILED jobs.

Syntax

FUNCTION get_fsu_action_output_content (
  fsu_action_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_action_output_content_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_COLLECTION Function

Gets a Exadata Fleet Update Collection by identifier.

Syntax

FUNCTION get_fsu_collection (
  fsu_collection_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_collection_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_CYCLE Function

Gets a Exadata Fleet Update Cycle by identifier.

Syntax

FUNCTION get_fsu_cycle (
  fsu_cycle_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_cycle_response_t;

Parameters

Parameter	Description
`fsu_cycle_id`	(required) Unique Exadata Fleet Update Cycle identifier.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_DISCOVERY Function

Gets a Exadata Fleet Update Discovery by identifier.

Syntax

FUNCTION get_fsu_discovery (
  fsu_discovery_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_discovery_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_JOB Function

Gets a Exadata Fleet Update Job by identifier.

Syntax

FUNCTION get_fsu_job (
  fsu_job_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_job_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_FSU_JOB_OUTPUT_CONTENT Function

Get the Exadata Fleet Update Job Output content as a binary file (string).

Syntax

FUNCTION get_fsu_job_output_content (
  fsu_job_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_fsu_job_output_content_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

GET_WORK_REQUEST Function

Gets the status of the work request with the specified ID.

Syntax

FUNCTION get_work_request (
  work_request_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_get_work_request_response_t;

Parameters

Parameter	Description
`work_request_id`	(required) The ID of the asynchronous request.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_ACTIONS Function

Gets a list of all Exadata Fleet Update Actions in a compartment.

Syntax

FUNCTION list_fsu_actions (
  compartment_id varchar2,
  fsu_cycle_id varchar2 DEFAULT NULL,
  lifecycle_state varchar2 DEFAULT NULL,
  display_name varchar2 DEFAULT NULL,
  l_type varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_actions_response_t;

Parameters

Parameter	Description
`compartment_id`	(required) The ID of the compartment in which to list resources.
`fsu_cycle_id`	(optional) A filter to return only resources whose fsuCycleId matches the given fleetSoftwareUpdateCycleId.
`lifecycle_state`	(optional) A filter to return only resources whose lifecycleState matches the given lifecycleState. Allowed values are: 'ACCEPTED', 'IN_PROGRESS', 'WAITING', 'UPDATING', 'FAILED', 'NEEDS_ATTENTION', 'SUCCEEDED', 'CANCELING', 'CANCELED', 'UNKNOWN', 'DELETING', 'DELETED'
`display_name`	(optional) A filter to return only resources that match the entire display name given.
`l_type`	(optional) A filter to return only resources whose type matches the given type. Allowed values are: 'STAGE', 'PRECHECK', 'APPLY', 'ROLLBACK_AND_REMOVE_TARGET', 'CLEANUP'
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Allowed values are: 'timeCreated', 'displayName'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_COLLECTION_TARGETS Function

Gets a list of all Targets that are members of a specific Exadata Fleet Update Collection.

Syntax

FUNCTION list_fsu_collection_targets (
  fsu_collection_id varchar2,
  compartment_id varchar2 DEFAULT NULL,
  target_id varchar2 DEFAULT NULL,
  status varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_collection_targets_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`compartment_id`	(optional) The ID of the compartment in which to list resources.
`target_id`	(optional) A filter to return a resource whose target OCID matches the given OCID.
`status`	(optional) A filter to return only entries whose status matches the given status. Allowed values are: 'IDLE', 'EXECUTING_JOB', 'JOB_FAILED'
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Allowed values are: 'currentVersion', 'status'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_COLLECTIONS Function

Gets a list of all Exadata Fleet Update Collections in a compartment.

Syntax

FUNCTION list_fsu_collections (
  compartment_id varchar2,
  lifecycle_state varchar2 DEFAULT NULL,
  display_name varchar2 DEFAULT NULL,
  l_type varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_collections_response_t;

Parameters

Parameter	Description
`compartment_id`	(required) The ID of the compartment in which to list resources.
`lifecycle_state`	(optional) A filter to return only resources whose lifecycleState matches the given lifecycleState. Allowed values are: 'CREATING', 'UPDATING', 'ACTIVE', 'NEEDS_ATTENTION', 'DELETING', 'DELETED', 'FAILED'
`display_name`	(optional) A filter to return only resources that match the entire display name given.
`l_type`	(optional) A filter to return only resources whose type matches the given type. Allowed values are: 'DB', 'GI'
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeCreated is descending. Default order for displayName is ascending. Allowed values are: 'timeCreated', 'displayName'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_CYCLES Function

Gets a list of all Exadata Fleet Update Cycles in a compartment.

Syntax

FUNCTION list_fsu_cycles (
  compartment_id varchar2,
  fsu_collection_id varchar2 DEFAULT NULL,
  lifecycle_state varchar2 DEFAULT NULL,
  collection_type varchar2 DEFAULT NULL,
  display_name varchar2 DEFAULT NULL,
  target_version varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_cycles_response_t;

Parameters

Parameter	Description
`compartment_id`	(required) The ID of the compartment in which to list resources.
`fsu_collection_id`	(optional) A filter to return only resources whose fsuCollectionId matches the given fsuCollectionId.
`lifecycle_state`	(optional) A filter to return only resources whose lifecycleState matches the given lifecycleState. Allowed values are: 'CREATING', 'ACTIVE', 'UPDATING', 'IN_PROGRESS', 'FAILED', 'NEEDS_ATTENTION', 'SUCCEEDED', 'DELETING', 'DELETED'
`collection_type`	(optional) A filter to return only resources whose Collection type matches the given type. Allowed values are: 'DB', 'GI'
`display_name`	(optional) A filter to return only resources that match the entire display name given.
`target_version`	(optional) A filter to return only entries whose targetVersion matches the given targetVersion.
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Allowed values are: 'timeCreated', 'displayName'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_DISCOVERIES Function

Returns a list of Exadata Fleet Update Discoveries resources in the specified compartment.

Syntax

FUNCTION list_fsu_discoveries (
  compartment_id varchar2,
  lifecycle_state varchar2 DEFAULT NULL,
  display_name varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_discoveries_response_t;

Parameters

Parameter	Description
`compartment_id`	(required) The ID of the compartment in which to list resources.
`lifecycle_state`	(optional) A filter to return only resources whose lifecycleState matches the given lifecycleState. Allowed values are: 'ACCEPTED', 'IN_PROGRESS', 'FAILED', 'SUCCEEDED', 'CANCELING', 'CANCELED', 'DELETING', 'DELETED'
`display_name`	(optional) A filter to return only resources that match the entire display name given.
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeCreated is descending. Default order for displayName is ascending. Allowed values are: 'timeCreated', 'displayName'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_DISCOVERY_TARGETS Function

Gets a list of all Targets in the results of a Exadata Fleet Update Discovery.

Syntax

FUNCTION list_fsu_discovery_targets (
  fsu_discovery_id varchar2,
  compartment_id varchar2 DEFAULT NULL,
  target_id varchar2 DEFAULT NULL,
  status varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_discovery_targets_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`compartment_id`	(optional) The ID of the compartment in which to list resources.
`target_id`	(optional) A filter to return a resource whose target OCID matches the given OCID.
`status`	(optional) A filter to return only entries whose status matches the given status. Allowed values are: 'IDLE', 'EXECUTING_JOB', 'JOB_FAILED'
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Allowed values are: 'currentVersion', 'status'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_JOB_OUTPUTS Function

Lists the Exadata Fleet Update Job Output messages, if any.

Syntax

FUNCTION list_fsu_job_outputs (
  fsu_job_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_job_outputs_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`opc_request_id`	(optional) The client request ID for tracing.
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_FSU_JOBS Function

Lists all the Exadata Fleet Update Jobs associated to the specified Exadata Fleet Update Action.

Syntax

FUNCTION list_fsu_jobs (
  fsu_action_id varchar2,
  lifecycle_state varchar2 DEFAULT NULL,
  display_name varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_fsu_jobs_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) The ID of the compartment in which to list resources.
`lifecycle_state`	(optional) A filter to return only resources whose lifecycleState matches the given lifecycleState. Allowed values are: 'ACCEPTED', 'IN_PROGRESS', 'UNKNOWN', 'TERMINATED', 'FAILED', 'NEEDS_ATTENTION', 'SUCCEEDED', 'WAITING', 'CANCELING', 'CANCELED'
`display_name`	(optional) A filter to return only resources that match the entire display name given.
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeCreated is descending. Default order for displayName is ascending. Allowed values are: 'timeCreated', 'displayName'
`limit`	(optional) The maximum number of items to return.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_WORK_REQUEST_ERRORS Function

Returns a paginated list of errors for a specified Work Request..

Syntax

FUNCTION list_work_request_errors (
  work_request_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_work_request_errors_response_t;

Parameters

Parameter	Description
`work_request_id`	(required) The ID of the asynchronous request.
`opc_request_id`	(optional) The client request ID for tracing.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`limit`	(optional) The maximum number of items to return.
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeAccepted is descending. Allowed values are: 'timeAccepted'
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_WORK_REQUEST_LOGS Function

Returns a paginated list of logs for a specified Work Request.

Syntax

FUNCTION list_work_request_logs (
  work_request_id varchar2,
  opc_request_id varchar2 DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_work_request_logs_response_t;

Parameters

Parameter	Description
`work_request_id`	(required) The ID of the asynchronous request.
`opc_request_id`	(optional) The client request ID for tracing.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`limit`	(optional) The maximum number of items to return.
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeAccepted is descending. Allowed values are: 'timeAccepted'
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

LIST_WORK_REQUESTS Function

Lists the work requests in a compartment.

Syntax

FUNCTION list_work_requests (
  compartment_id varchar2,
  work_request_id varchar2 DEFAULT NULL,
  status varchar2 DEFAULT NULL,
  resource_id varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  page varchar2 DEFAULT NULL,
  limit number DEFAULT NULL,
  sort_order varchar2 DEFAULT NULL,
  sort_by varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_list_work_requests_response_t;

Parameters

Parameter	Description
`compartment_id`	(required) The ID of the compartment in which to list resources.
`work_request_id`	(optional) The ID of the asynchronous work request.
`status`	(optional) A filter to return only resources whose lifecycleState matches the given OperationStatus. Allowed values are: 'ACCEPTED', 'IN_PROGRESS', 'WAITING', 'FAILED', 'SUCCEEDED', 'CANCELING', 'CANCELED'
`resource_id`	(optional) The ID of the resource affected by the work request.
`opc_request_id`	(optional) The client request ID for tracing.
`page`	(optional) A token representing the position at which to start retrieving results. This must come from the `opc-next-page` header field of a previous response.
`limit`	(optional) The maximum number of items to return.
`sort_order`	(optional) The sort order to use, either 'ASC' or 'DESC'. Allowed values are: 'ASC', 'DESC'
`sort_by`	(optional) The field to sort by. Only one sort order may be provided. Default order for timeAccepted is descending. Allowed values are: 'timeAccepted'
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

REMOVE_FSU_COLLECTION_TARGETS Function

Removes targets from an existing Exadata Fleet Update Collection. This operation can only be performed on Collections that do not have an Action executing under an active Fleet Software Update Cycle. Additionally, during an active Fleet Software Update Cycle, targets can be removed only prior to executing an Apply Action.

Syntax

FUNCTION remove_fsu_collection_targets (
  fsu_collection_id varchar2,
  remove_fsu_collection_targets_details dbms_cloud_oci_fleet_software_update_remove_fsu_collection_targets_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_remove_fsu_collection_targets_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`remove_fsu_collection_targets_details`	(required) The Targets to be removed from the Exadata Fleet Update Collection.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

RESUME_FSU_ACTION Function

Resumes an Action that has batches of targets waiting to execute.

Syntax

FUNCTION resume_fsu_action (
  fsu_action_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_resume_fsu_action_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

RETRY_FSU_JOB Function

Retry a failed Job, only while the current Action is being executed. After the Action reaches a terminal state, a new Action of the same kind is required to retry on failed targets.

Syntax

FUNCTION retry_fsu_job (
  fsu_job_id varchar2,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  opc_retry_token varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_retry_fsu_job_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`opc_retry_token`	(optional) A token that uniquely identifies a request so it can be retried in case of a timeout or server error without risk of executing that same action again. Retry tokens expire after 24 hours, but can be invalidated before then due to conflicting operations. For example, if a resource has been deleted and purged from the system, then a retry of the original creation request might be rejected.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

UPDATE_FSU_ACTION Function

Updates the Exadata Fleet Update Action identified by the ID.

Syntax

FUNCTION update_fsu_action (
  fsu_action_id varchar2,
  update_fsu_action_details dbms_cloud_oci_fleet_software_update_update_fsu_action_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_update_fsu_action_response_t;

Parameters

Parameter	Description
`fsu_action_id`	(required) Unique Exadata Fleet Update Action identifier.
`update_fsu_action_details`	(required) The Exadata Fleet Update Action details to be updated.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

UPDATE_FSU_COLLECTION Function

Updates the Exadata Fleet Update Collection identified by the ID.

Syntax

FUNCTION update_fsu_collection (
  fsu_collection_id varchar2,
  update_fsu_collection_details dbms_cloud_oci_fleet_software_update_update_fsu_collection_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_update_fsu_collection_response_t;

Parameters

Parameter	Description
`fsu_collection_id`	(required) Unique Exadata Fleet Update Collection identifier.
`update_fsu_collection_details`	(required) The Exadata Fleet Update Collection details to be updated.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

UPDATE_FSU_CYCLE Function

Updates the Exadata Fleet Update Cycle identified by the ID.

Syntax

FUNCTION update_fsu_cycle (
  fsu_cycle_id varchar2,
  update_fsu_cycle_details dbms_cloud_oci_fleet_software_update_update_fsu_cycle_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_update_fsu_cycle_response_t;

Parameters

Parameter	Description
`fsu_cycle_id`	(required) Unique Exadata Fleet Update Cycle identifier.
`update_fsu_cycle_details`	(required) The Exadata Fleet Update Cycle details to be updated.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

UPDATE_FSU_DISCOVERY Function

Updates the Exadata Fleet Update Discovery identified by the ID.

Syntax

FUNCTION update_fsu_discovery (
  fsu_discovery_id varchar2,
  update_fsu_discovery_details dbms_cloud_oci_fleet_software_update_update_fsu_discovery_details_t,
  if_match varchar2 DEFAULT NULL,
  opc_request_id varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_update_fsu_discovery_response_t;

Parameters

Parameter	Description
`fsu_discovery_id`	(required) Unique Exadata Fleet Update Discovery identifier.
`update_fsu_discovery_details`	(required) The Exadata Fleet Update Discovery details to be updated.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`opc_request_id`	(optional) The client request ID for tracing.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

UPDATE_FSU_JOB Function

Updates Exadata Fleet Update Job resource details.

Syntax

FUNCTION update_fsu_job (
  fsu_job_id varchar2,
  update_fsu_job_details dbms_cloud_oci_fleet_software_update_update_fsu_job_details_t,
  opc_request_id varchar2 DEFAULT NULL,
  if_match varchar2 DEFAULT NULL,
  region varchar2 DEFAULT NULL, 
  endpoint varchar2 DEFAULT NULL,
  credential_name varchar2 DEFAULT NULL
) RETURN dbms_cloud_oci_fsu_fleet_software_update_update_fsu_job_response_t;

Parameters

Parameter	Description
`fsu_job_id`	(required) The OCID of the Exadata Fleet Update Job.
`update_fsu_job_details`	(required) The Exadata Fleet Update Job details to be updated.
`opc_request_id`	(optional) The client request ID for tracing.
`if_match`	(optional) For optimistic concurrency control. In the PUT or DELETE call for a resource, set the `if-match` parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource's current etag value.
`region`	(optional) OCI region id. e.g us-phoenix-1 for US West (Phoenix).
`endpoint`	(optional) The endpoint of the service to call using this function. e.g https://fleet-software-update.{region}.oci.{secondLevelDomain}.If both endpoint and region are given, then endpoint takes precedence.
`credential_name`	(optional) The name of the credential for authenticating with the corresponding cloud native API.

Oracle Cloud Infrastructure Documentation Try Free Tier

ABORT_FSU_DISCOVERY Function 🔗

ADD_FSU_COLLECTION_TARGETS Function 🔗

CANCEL_FSU_ACTION Function 🔗

CHANGE_FSU_ACTION_COMPARTMENT Function 🔗

CHANGE_FSU_COLLECTION_COMPARTMENT Function 🔗

CHANGE_FSU_CYCLE_COMPARTMENT Function 🔗

CHANGE_FSU_DISCOVERY_COMPARTMENT Function 🔗

CLONE_FSU_CYCLE Function 🔗

CREATE_FSU_ACTION Function 🔗

CREATE_FSU_COLLECTION Function 🔗

CREATE_FSU_CYCLE Function 🔗

CREATE_FSU_DISCOVERY Function 🔗

DELETE_FSU_ACTION Function 🔗

DELETE_FSU_COLLECTION Function 🔗

DELETE_FSU_CYCLE Function 🔗

DELETE_FSU_DISCOVERY Function 🔗

DELETE_FSU_JOB Function 🔗

GET_FSU_ACTION Function 🔗

GET_FSU_ACTION_OUTPUT_CONTENT Function 🔗

GET_FSU_COLLECTION Function 🔗

GET_FSU_CYCLE Function 🔗

GET_FSU_DISCOVERY Function 🔗

GET_FSU_JOB Function 🔗

GET_FSU_JOB_OUTPUT_CONTENT Function 🔗

GET_WORK_REQUEST Function 🔗

LIST_FSU_ACTIONS Function 🔗

LIST_FSU_COLLECTION_TARGETS Function 🔗

LIST_FSU_COLLECTIONS Function 🔗

LIST_FSU_CYCLES Function 🔗

LIST_FSU_DISCOVERIES Function 🔗

LIST_FSU_DISCOVERY_TARGETS Function 🔗

LIST_FSU_JOB_OUTPUTS Function 🔗

LIST_FSU_JOBS Function 🔗

LIST_WORK_REQUEST_ERRORS Function 🔗

LIST_WORK_REQUEST_LOGS Function 🔗

LIST_WORK_REQUESTS Function 🔗

REMOVE_FSU_COLLECTION_TARGETS Function 🔗

RESUME_FSU_ACTION Function 🔗

RETRY_FSU_JOB Function 🔗

UPDATE_FSU_ACTION Function 🔗

UPDATE_FSU_COLLECTION Function 🔗

UPDATE_FSU_CYCLE Function 🔗

UPDATE_FSU_DISCOVERY Function 🔗

UPDATE_FSU_JOB Function 🔗

Oracle Cloud Infrastructure Documentation
Try Free Tier

ABORT_FSU_DISCOVERY Function

ADD_FSU_COLLECTION_TARGETS Function

CANCEL_FSU_ACTION Function

CHANGE_FSU_ACTION_COMPARTMENT Function

CHANGE_FSU_COLLECTION_COMPARTMENT Function

CHANGE_FSU_CYCLE_COMPARTMENT Function

CHANGE_FSU_DISCOVERY_COMPARTMENT Function

CLONE_FSU_CYCLE Function

CREATE_FSU_ACTION Function

CREATE_FSU_COLLECTION Function

CREATE_FSU_CYCLE Function

CREATE_FSU_DISCOVERY Function

DELETE_FSU_ACTION Function

DELETE_FSU_COLLECTION Function

DELETE_FSU_CYCLE Function

DELETE_FSU_DISCOVERY Function

DELETE_FSU_JOB Function

GET_FSU_ACTION Function

GET_FSU_ACTION_OUTPUT_CONTENT Function

GET_FSU_COLLECTION Function

GET_FSU_CYCLE Function

GET_FSU_DISCOVERY Function

GET_FSU_JOB Function

GET_FSU_JOB_OUTPUT_CONTENT Function

GET_WORK_REQUEST Function

LIST_FSU_ACTIONS Function

LIST_FSU_COLLECTION_TARGETS Function

LIST_FSU_COLLECTIONS Function

LIST_FSU_CYCLES Function

LIST_FSU_DISCOVERIES Function

LIST_FSU_DISCOVERY_TARGETS Function

LIST_FSU_JOB_OUTPUTS Function

LIST_FSU_JOBS Function

LIST_WORK_REQUEST_ERRORS Function

LIST_WORK_REQUEST_LOGS Function

LIST_WORK_REQUESTS Function

REMOVE_FSU_COLLECTION_TARGETS Function

RESUME_FSU_ACTION Function

RETRY_FSU_JOB Function

UPDATE_FSU_ACTION Function

UPDATE_FSU_COLLECTION Function

UPDATE_FSU_CYCLE Function

UPDATE_FSU_DISCOVERY Function

UPDATE_FSU_JOB Function