Oracle Cloud Infrastructure Documentation
Try Free Tier

Configure Multiple Identity Stripes for Oracle Integration 3

For Oracle Integration 3, the primary (primordial) stripe is automatically federated using preconfigured groups. However, you can create separate environments for a single cloud service or application (for example, create one environment for development and one for production), where each environment has a different identity and security requirements. Implementing one or more secondary stripes enables you to create and manage multiple instances of Oracle Identity Cloud Service to protect your applications and Oracle Cloud services.

Note

Once provisioned, you cannot change the Oracle Identity Cloud Service stripe or change the association of the Oracle Integration instance to another IAM domain.

Does not use identity domains This topic applies only to tenancies that do not use identity domains. See Differences Between Tenancies With and Without Identity Domains.

You can manually federate one or more secondary stripes with Oracle Cloud Infrastructure using SAML IDP federation in which multiple Oracle Identity Cloud Service stripes are associated with the same tenancy. Note that the account owner administers both primary and secondary stripes, but identities within the stripes are isolated from each other.

For benefits to using multiple Oracle Identity Cloud Service instances, see About Multiple Instances.

Follow the steps below to manually federate a secondary stripe for your tenancy. You must be the owner of the tenancy.

  1. Define a Stripe Naming Convention
  2. Create an IDCS Group for Secondary Stripe Users
  3. Create an OAuth Client in the Secondary Stripe
  4. Create an Oracle Cloud Infrastructure Group for Secondary Stripe Users
  5. Create the Federation and Its Group Mapping
  6. Create an Oracle Cloud Infrastructure Policy for Federated Users to Create Instances
  7. Provide Access to a Federated Stripe in the Oracle Cloud Infrastructure Console Group for Secondary Stripe Users
  8. Create Oracle Integration Instances in the Secondary Stripe Compartment

Define a Stripe Naming Convention

As a best practice, define a <stripename> for all the entities you'll create specific to the stripe. Uniquely identifying configurations associated with a stripe is important, especially when multiple stripes are configured.

In the sections that follow, you'll use stripename in these entities:

Entity Naming convention

IDCS group

stripename_administrators

OCI group

oci_stripename_administrators

Compartment

stripename_compartment

Identity Provider

stripename_service

Policy

stripename_adminpolicy

Policy Statement

allow group oci_stripename_administrators to manage integration-instances in compartment stripename_compartment

Create an IDCS Group for Secondary Stripe Users

In IDCS, create a group in the secondary stripe and add users from the secondary stripe to the group.

  1. Add a group in the secondary stripe, and name it stripename_administrators. See Define a Stripe Naming Convention. For example, name it stripe2_administrators. Click Finish.
    For more information, see Create Groups in Administering Oracle Identity Cloud Service.

    These administrators will be granted permission to create Oracle Integration instances. This IDCS group will be mapped with an Oracle Cloud Infrastructure group.

  2. Add users from the secondary stripe to the group.

Create an OAuth Client in the Secondary Stripe

Create an IDCS confidential application that uses OAuth client credentials and is assigned the IDCS domain administrator role. You must create a confidential application per secondary stripe.

  1. As an IDCS administrator, sign in to the secondary IDCS admin console.
  2. Add a confidential application.
    1. Navigate to the Applications tab.
    2. Click Add.
    3. Choose Confidential Application.
    4. Name the application Client_Credentials_For_SAML_Federation.
    5. Click Next.

    Description of add_confidential_application.png follows

  3. Configure client settings.
    1. Click Configure this application as a client now.
    2. Under Authorization, select Client Credentials.

      Description of add_confidential_application_client_tab.png follows

    3. Under Grant the client access to Identity Cloud Service Admin APIs, click Add and select the app role Identity Domain Administrator.

      Description of add_confidential_application_app_roles.png follows

    4. Click Next twice.
  4. Click Finish. Once the application is created, note its client ID and client secret. You’ll need this information in upcoming steps for federation.

    Description of application_added.png follows

  5. Click Activate and confirm activating the application.

Create an Oracle Cloud Infrastructure Group for Secondary Stripe Users

This group is needed because the Oracle Cloud Infrastructure SAML IDP federation requires group mapping for federating users from the federated IDP (IDCS), and OCI native group membership is required for defining and granting Oracle Cloud Infrastructure permissions (policies) for federated users.

  1. In the Oracle Cloud Infrastructure Console, open the navigation menu and click Identity & Security. Under Identity, click Groups.

    This Oracle Cloud Infrastructure group will be mapped with the IDCS group you created.

  2. Create a group and name it oci_stripename_administrators. For example, name it oci_stripe2_administrators.

Create the Federation and Its Group Mapping

Now that you have the IDCS and Oracle Cloud Infrastructure groups created and client information needed, create the IDCS identity provider and map the groups.

  1. Sign in to the Oracle Cloud Infrastructure console. Select the identity domain of the primordial stripe (identitycloudservice) and enter its user credentials.

    Keep in mind that group mapping for a secondary stripe uses the primordial stripe user sign in. This is important, since adding multiple stripes adds multiple options to this dropdown.

  2. Open the navigation menu and click Identity & Security, then Federation.
  3. Click Add Identity Provider.
  4. In the screen displayed, complete the fields as shown below.
    Field Entry

    Name

    <stripename>_service

    Description

    Federation with IDCS secondary stripe

    Type

    Oracle Identity Cloud Service

    Oracle Identity Cloud Service Base URL

    Enter this URL using the format:

    https://idcs-xxxx.identity.oraclecloud.com

    Replace the <idcs-xxxx> domain part with your secondary IDCS stripe.

    Client ID/Client Secret

    Enter this information that you created in the secondary stripe and noted during Create an OAuth Client in the Secondary Stripe steps.

    Force Authentication

    Select this option
  5. Click Continue.
  6. Map the IDCS secondary stripe and OCI groups you previously created.
    Map the IDCS secondary stripe group (created in Create an IDCS Group for Secondary Stripe Users) and the OCI group (created in Create an Oracle Cloud Infrastructure Group for Secondary Stripe Users).
  7. Click Add Provider.
    The secondary stripe federation is complete. Notice that the group mapping is displayed.

    Description of striping_federation.png follows

  8. Verify the secondary stripe, and configure visibility for secondary stripe administrators and users.

Create an Oracle Cloud Infrastructure Policy for Federated Users to Create Instances

With the federation done, set up Oracle Cloud Infrastructure policies that allow federated users from the secondary IDCS stripe to create Oracle Integration instances. As a common pattern, the policy is scoped to a compartment.

  1. Create a compartment where Oracle Integration instances for the secondary IDCS stripe can be created. Name the compartment stripename_compartment.
    For example, create a compartment named stripe2_compartment.
  2. Create a policy that will allow federated users to create Oracle Integration instances in the compartment. Name the policy stripename_adminpolicy (for example, stripe2_adminpolicy).
    Under Policy Builder, select Show manual editor.

    • Syntax: allow group stripename_administrators toverb resource-typein compartmentstripename_compartment

    • Policy: allow group oci_stripe2_administrators to manage integration-instances in compartment stripe2_compartment

    This policy allows a user who is a member of the group in the policy to create an Oracle Integration instance (integration-instance) in the compartment named stripe2_compartment.

Provide Access to a Federated Stripe in the Oracle Cloud Infrastructure Console Group for Secondary Stripe Users

Perform additional steps to enable the secondary stripe administrator and all other secondary stripe users to see stripes under federation.

  1. In Oracle Identity Cloud Service, create a group called stripe2_federation_administrators.
  2. Add users to the group that you want to be able to see the federation and to create users and groups in the Oracle Cloud Infrastructure console in that stripe.
  3. In the Oracle Cloud Infrastructure console, using the primary stripe user with the correct permission, create an Oracle Cloud Infrastructure group called oci_stripe2_federation_administrators.
  4. Map the stripe2_federation_administrators and oci_stripe2_federation_administrators groups.
  5. Using the following statement examples, define a policy that grants access to federated stripes.
    Several of the examples show how to grant access to a specific federated stripe, by using a where clause that identifies the secondary stripe. You can get the federation's OCID from the federation view in the Oracle Cloud Infrastructure console.
    Allows secondary stripe administrators to.... Policy statement

    Create groups (use)

    allow group oci_stripe2_federation_administrators to use groups in tenancy

    List the identity providers in the federation (inspect)

    allow group oci_stripe2_federation_administrators to inspect identity-providers in tenancy

    Note that if the secondary stripe admins are required to create groups, this policy is required when a where clause is included.

    Access a specific federated stripe (use)

    allow group oci_stripe2_federation_administrators to use identity-providers in tenancy where target.identity-provider.id=“ocid1.saml2idp.oc1..aaaaaaaaa…”

    Manage ALL or ONLY a specific secondary stripe identity provider (manage)

    • ALL:

      allow group oci_stripe2_federation_administrators to manage identity-providers in tenancy

    • ONLY specific secondary stripe identity provider:

      allow group oci_stripe2_federation_administrators to manage identity-providers in tenancy where target.identity-provider.id = "ocid1.saml2idp.oc1..aaaaaaaaa…"

When you sign in as a user in the above Oracle Identity Cloud Service group, you can create users and groups in the Oracle Cloud Infrastructure console and assign permissions as you would in a primary stripe.

Additional information about where clauses

Suppose you define a policy for a group (as in the example shown below) that uses the manage verb with a where clause restricting it to a specific identity provider (ocid).

Example policy:

allow group OCISecStripeAdmin to manage identity-providers in tenancy where target.identity-provider.id='ocid1.saml2idp.oc1..aaaaaaaa...’

When a user from the group logs into the Oracle Cloud Infrastructure Console and navigates to the Federation page, the following message appears within the table: Authorization failed or requested resource not found.

Adding the following additional policy enables users in the group to navigate to the same page and see the identity providers. They can inspect both, but are only able to see the group mappings (read) of the allowed identity provider:

Additional example policy: allow group OCISecStripeAdmin to inspect identity-providers in tenancy

Create Oracle Integration Instances in the Secondary Stripe Compartment

With federation and Oracle Cloud Infrastructure policies defined, federated users can sign into the Oracle Cloud Infrastructure Console and create Oracle Integration instances.

  1. Sign in to the Oracle Cloud Infrastructure Console as a federated user from the secondary stripe.
    Users will need to select the secondary stripe in the Identity Provider field (idcs-secondary-stripe-service, in this case).
  2. Authorized administrators can create Oracle Integration instances in the specified compartment (idcs-secondary-stripe-compartment, in this case).

Was this article helpful?