WorkRequestClient

class oci.work_requests.WorkRequestClient(config, **kwargs)

Many of the API operations that you use to create and configure Compute resources do not take effect immediately. In these cases, the operation spawns an asynchronous workflow to fulfill the request. Work requests provide visibility into the status of these in-progress, long-running workflows.

For more information about work requests and the operations that spawn work requests, see [Viewing the State of a Compute Work Request](/iaas/Content/Compute/Tasks/viewingworkrequestcompute.htm).

Methods

__init__(config, **kwargs) Creates a new service client
get_work_request(work_request_id, **kwargs) Gets the details of a work request.
list_work_request_errors(work_request_id, …) Gets the errors for a work request.
list_work_request_logs(work_request_id, **kwargs) Gets the logs for a work request.
list_work_requests(compartment_id, **kwargs) Lists the work requests in a compartment or for a specified resource.
__init__(config, **kwargs)

Creates a new service client

Parameters:
  • config (dict) – Configuration keys and values as per SDK and Tool Configuration. The from_file() method can be used to load configuration from a file. Alternatively, a dict can be passed. You can validate_config the dict using validate_config()
  • service_endpoint (str) – (optional) The endpoint of the service to call using this client. For example https://iaas.us-ashburn-1.oraclecloud.com. If this keyword argument is not provided then it will be derived using the region in the config parameter. You should only provide this keyword argument if you have an explicit need to specify a service endpoint.
  • timeout (float or tuple(float, float)) – (optional) The connection and read timeouts for the client. The default values are connection timeout 10 seconds and read timeout 60 seconds. This keyword argument can be provided as a single float, in which case the value provided is used for both the read and connection timeouts, or as a tuple of two floats. If a tuple is provided then the first value is used as the connection timeout and the second value as the read timeout.
  • signer (AbstractBaseSigner) –

    (optional) The signer to use when signing requests made by the service client. The default is to use a Signer based on the values provided in the config parameter.

    One use case for this parameter is for Instance Principals authentication by passing an instance of InstancePrincipalsSecurityTokenSigner as the value for this keyword argument

  • retry_strategy (obj) –

    (optional) A retry strategy to apply to all calls made by this service client (i.e. at the client level). There is no retry strategy applied by default. Retry strategies can also be applied at the operation level by passing a retry_strategy keyword argument as part of calling the operation. Any value provided at the operation level will override whatever is specified at the client level.

    This should be one of the strategies available in the retry module. A convenience DEFAULT_RETRY_STRATEGY is also available. The specifics of the default retry strategy are described here.

  • circuit_breaker_strategy (obj) – (optional) A circuit breaker strategy to apply to all calls made by this service client (i.e. at the client level). This client uses DEFAULT_CIRCUIT_BREAKER_STRATEGY as default if no circuit breaker strategy is provided. The specifics of circuit breaker strategy are described here.
  • circuit_breaker_callback (function) – (optional) Callback function to receive any exceptions triggerred by the circuit breaker.
  • client_level_realm_specific_endpoint_template_enabled (bool) – (optional) A boolean flag to indicate whether or not this client should be created with realm specific endpoint template enabled or disable. By default, this will be set as None.
  • allow_control_chars – (optional) allow_control_chars is a boolean to indicate whether or not this client should allow control characters in the response object. By default, the client will not allow control characters to be in the response object.
get_work_request(work_request_id, **kwargs)

Gets the details of a work request.

Parameters:
  • work_request_id (str) –

    (required) The OCID of the work request.

  • opc_request_id (str) – (optional) Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.
  • retry_strategy (obj) –

    (optional) A retry strategy to apply to this specific operation/call. This will override any retry strategy set at the client-level.

    This should be one of the strategies available in the retry module. This operation will not retry by default, users can also use the convenient DEFAULT_RETRY_STRATEGY provided by the SDK to enable retries for it. The specifics of the default retry strategy are described here.

    To have this operation explicitly not perform any retries, pass an instance of NoneRetryStrategy.

  • allow_control_chars (bool) – (optional) allow_control_chars is a boolean to indicate whether or not this request should allow control characters in the response object. By default, the response will not allow control characters in strings
Returns:

A Response object with data of type WorkRequest
Return type:

Response
Example:

Click here to see an example of how to use get_work_request API.

list_work_request_errors(work_request_id, **kwargs)

Gets the errors for a work request.

Parameters:
  • work_request_id (str) –

    (required) The OCID of the work request.

  • limit (int) –

    (optional) For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination.

  • page (str) –

    (optional) For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination.

  • sort_order (str) –

    (optional) The sort order to use, either ascending (ASC) or descending (DESC).

    Allowed values are: “ASC”, “DESC”

  • opc_request_id (str) – (optional) Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.
  • retry_strategy (obj) –

    (optional) A retry strategy to apply to this specific operation/call. This will override any retry strategy set at the client-level.

    This should be one of the strategies available in the retry module. This operation will not retry by default, users can also use the convenient DEFAULT_RETRY_STRATEGY provided by the SDK to enable retries for it. The specifics of the default retry strategy are described here.

    To have this operation explicitly not perform any retries, pass an instance of NoneRetryStrategy.

  • allow_control_chars (bool) – (optional) allow_control_chars is a boolean to indicate whether or not this request should allow control characters in the response object. By default, the response will not allow control characters in strings
Returns:

A Response object with data of type list of WorkRequestError
Return type:

Response
Example:

Click here to see an example of how to use list_work_request_errors API.

list_work_request_logs(work_request_id, **kwargs)

Gets the logs for a work request.

Parameters:
  • work_request_id (str) –

    (required) The OCID of the work request.

  • limit (int) –

    (optional) For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination.

  • page (str) –

    (optional) For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination.

  • sort_order (str) –

    (optional) The sort order to use, either ascending (ASC) or descending (DESC).

    Allowed values are: “ASC”, “DESC”

  • opc_request_id (str) – (optional) Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.
  • retry_strategy (obj) –

    (optional) A retry strategy to apply to this specific operation/call. This will override any retry strategy set at the client-level.

    This should be one of the strategies available in the retry module. This operation will not retry by default, users can also use the convenient DEFAULT_RETRY_STRATEGY provided by the SDK to enable retries for it. The specifics of the default retry strategy are described here.

    To have this operation explicitly not perform any retries, pass an instance of NoneRetryStrategy.

  • allow_control_chars (bool) – (optional) allow_control_chars is a boolean to indicate whether or not this request should allow control characters in the response object. By default, the response will not allow control characters in strings
Returns:

A Response object with data of type list of WorkRequestLogEntry
Return type:

Response
Example:

Click here to see an example of how to use list_work_request_logs API.

list_work_requests(compartment_id, **kwargs)

Lists the work requests in a compartment or for a specified resource.

Parameters:
  • compartment_id (str) –

    (required) The OCID of the compartment.

  • resource_id (str) –

    (optional) The OCID of the resource.

  • limit (int) –

    (optional) For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination.

  • page (str) –

    (optional) For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination.

  • opc_request_id (str) – (optional) Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.
  • retry_strategy (obj) –

    (optional) A retry strategy to apply to this specific operation/call. This will override any retry strategy set at the client-level.

    This should be one of the strategies available in the retry module. This operation will not retry by default, users can also use the convenient DEFAULT_RETRY_STRATEGY provided by the SDK to enable retries for it. The specifics of the default retry strategy are described here.

    To have this operation explicitly not perform any retries, pass an instance of NoneRetryStrategy.

  • allow_control_chars (bool) – (optional) allow_control_chars is a boolean to indicate whether or not this request should allow control characters in the response object. By default, the response will not allow control characters in strings
Returns:

A Response object with data of type list of WorkRequestSummary
Return type:

Response
Example:

Click here to see an example of how to use list_work_requests API.